G4EllipticalCone.cc

Go to the documentation of this file.

//
// ********************************************************************
// * License and Disclaimer                                           *
// *                                                                  *
// * The  Geant4 software  is  copyright of the Copyright Holders  of *
// * the Geant4 Collaboration.  It is provided  under  the terms  and *
// * conditions of the Geant4 Software License,  included in the file *
// * LICENSE and available at  http://cern.ch/geant4/license .  These *
// * include a list of copyright holders.                             *
// *                                                                  *
// * Neither the authors of this software system, nor their employing *
// * institutes,nor the agencies providing financial support for this *
// * work  make  any representation or  warranty, express or implied, *
// * regarding  this  software system or assume any liability for its *
// * use.  Please see the license in the file  LICENSE  and URL above *
// * for the full disclaimer and the limitation of liability.         *
// *                                                                  *
// * This  code  implementation is the result of  the  scientific and *
// * technical work of the GEANT4 collaboration.                      *
// * By using,  copying,  modifying or  distributing the software (or *
// * any work based  on the software)  you  agree  to acknowledge its *
// * use  in  resulting  scientific  publications,  and indicate your *
// * acceptance of all terms of the Geant4 Software license.          *
// ********************************************************************
//
// $Id: G4EllipticalCone.cc 101118 2016-11-07 09:10:59Z gcosmo $
//
// Implementation of G4EllipticalCone class
//
// This code implements an Elliptical Cone given explicitly by the
// equation:
//   x^2/a^2 + y^2/b^2 = (z-h)^2
// and specified by the parameters (a,b,h) and a cut parallel to the
// xy plane above z = 0.
//
// Author: Dionysios Anninos
//
// --------------------------------------------------------------------

#include "globals.hh"

#include "G4EllipticalCone.hh"

#include "G4ClippablePolygon.hh"
#include "G4VoxelLimits.hh"
#include "G4AffineTransform.hh"
#include "G4BoundingEnvelope.hh"
#include "G4GeometryTolerance.hh"

#include "meshdefs.hh"

#include "Randomize.hh"

#include "G4VGraphicsScene.hh"
#include "G4VisExtent.hh"

#include "G4AutoLock.hh"

namespace
{
  G4Mutex polyhedronMutex = G4MUTEX_INITIALIZER;
}

using namespace CLHEP;

//
// Constructor - check parameters
//
G4EllipticalCone::G4EllipticalCone(const G4String& pName,
                                         G4double  pxSemiAxis,
                                         G4double  pySemiAxis,
                                         G4double  pzMax,
                                         G4double  pzTopCut)
  : G4VSolid(pName), fRebuildPolyhedron(false), fpPolyhedron(0),
    fCubicVolume(0.), fSurfaceArea(0.), zTopCut(0.)
{

  kRadTolerance = G4GeometryTolerance::GetInstance()->GetRadialTolerance();

  halfRadTol = 0.5*kRadTolerance;
  halfCarTol = 0.5*kCarTolerance;

  // Check Semi-Axis & Z-cut
  //
  if ( (pxSemiAxis <= 0.) || (pySemiAxis <= 0.) || (pzMax <= 0.) )
  {
     std::ostringstream message;
     message << "Invalid semi-axis or height - " << GetName();
     G4Exception("G4EllipticalCone::G4EllipticalCone()", "GeomSolids0002",
                 FatalErrorInArgument, message);
  }
  if ( pzTopCut <= 0 )
  {
     std::ostringstream message;
     message << "Invalid z-coordinate for cutting plane - " << GetName();
     G4Exception("G4EllipticalCone::G4EllipticalCone()", "InvalidSetup",
                 FatalErrorInArgument, message);
  }

  SetSemiAxis( pxSemiAxis, pySemiAxis, pzMax );
  SetZCut(pzTopCut);
}

//
// Fake default constructor - sets only member data and allocates memory
//                            for usage restricted to object persistency.
//
G4EllipticalCone::G4EllipticalCone( __void__& a )
  : G4VSolid(a), fRebuildPolyhedron(false), fpPolyhedron(0),
    kRadTolerance(0.), halfRadTol(0.), halfCarTol(0.), fCubicVolume(0.),
    fSurfaceArea(0.), xSemiAxis(0.), ySemiAxis(0.), zheight(0.),
    semiAxisMax(0.), zTopCut(0.)
{
}

//
// Destructor
//
G4EllipticalCone::~G4EllipticalCone()
{
  delete fpPolyhedron; fpPolyhedron = 0;
}

//
// Copy constructor
//
G4EllipticalCone::G4EllipticalCone(const G4EllipticalCone& rhs)
  : G4VSolid(rhs),
    fRebuildPolyhedron(false), fpPolyhedron(0),
    kRadTolerance(rhs.kRadTolerance),
    halfRadTol(rhs.halfRadTol), halfCarTol(rhs.halfCarTol), 
    fCubicVolume(rhs.fCubicVolume), fSurfaceArea(rhs.fSurfaceArea),
    xSemiAxis(rhs.xSemiAxis), ySemiAxis(rhs.ySemiAxis), zheight(rhs.zheight),
    semiAxisMax(rhs.semiAxisMax), zTopCut(rhs.zTopCut)
{
}

//
// Assignment operator
//
G4EllipticalCone& G4EllipticalCone::operator = (const G4EllipticalCone& rhs) 
{
   // Check assignment to self
   //
   if (this == &rhs)  { return *this; }

   // Copy base class data
   //
   G4VSolid::operator=(rhs);

   // Copy data
   //
   kRadTolerance = rhs.kRadTolerance;
   halfRadTol = rhs.halfRadTol; halfCarTol = rhs.halfCarTol;
   fCubicVolume = rhs.fCubicVolume; fSurfaceArea = rhs.fSurfaceArea;
   xSemiAxis = rhs.xSemiAxis; ySemiAxis = rhs.ySemiAxis;
   zheight = rhs.zheight; semiAxisMax = rhs.semiAxisMax; zTopCut = rhs.zTopCut;
   fRebuildPolyhedron = false;
   delete fpPolyhedron; fpPolyhedron = 0;

   return *this;
}

//
// Get bounding box

void G4EllipticalCone::Extent(G4ThreeVector& pMin, G4ThreeVector& pMax) const
{
  G4double zcut   = GetZTopCut();
  G4double height = GetZMax(); 
  G4double xmax   = GetSemiAxisX()*(height+zcut);
  G4double ymax   = GetSemiAxisY()*(height+zcut);
  pMin.set(-xmax,-ymax,-zcut);
  pMax.set( xmax, ymax, zcut);

  // Check correctness of the bounding box
  //
  if (pMin.x() >= pMax.x() || pMin.y() >= pMax.y() || pMin.z() >= pMax.z())
  {
    std::ostringstream message;
    message << "Bad bounding box (min >= max) for solid: "
            << GetName() << " !"
            << "\npMin = " << pMin
            << "\npMax = " << pMax;
    G4Exception("G4EllipticalCone::Extent()", "GeomMgt0001",
                JustWarning, message);
    DumpInfo();
  }
}

//
// Calculate extent under transform and specified limit
//
G4bool
G4EllipticalCone::CalculateExtent(const EAxis pAxis,
                                  const G4VoxelLimits& pVoxelLimit,
                                  const G4AffineTransform& pTransform,
                                        G4double& pMin, G4double& pMax) const
{
  G4ThreeVector bmin,bmax;
  G4bool exist;

  // Check bounding box (bbox)
  //
  Extent(bmin,bmax);
  G4BoundingEnvelope bbox(bmin,bmax);
#ifdef G4BBOX_EXTENT
  if (true) return bbox.CalculateExtent(pAxis,pVoxelLimit,pTransform,pMin,pMax);
#endif
  if (bbox.BoundingBoxVsVoxelLimits(pAxis,pVoxelLimit,pTransform,pMin,pMax))
  {
    return exist = (pMin < pMax) ? true : false;
  }

  // Set bounding envelope (benv) and calculate extent
  //
  static const G4int NSTEPS = 48; // number of steps for whole circle
  static const G4double ang = twopi/NSTEPS;
  static const G4double sinHalf = std::sin(0.5*ang);
  static const G4double cosHalf = std::cos(0.5*ang);
  static const G4double sinStep = 2.*sinHalf*cosHalf;
  static const G4double cosStep = 1. - 2.*sinHalf*sinHalf;
  G4double zcut   = bmax.z();
  G4double height = GetZMax(); 
  G4double sxmin  = GetSemiAxisX()*(height-zcut)/cosHalf;
  G4double symin  = GetSemiAxisY()*(height-zcut)/cosHalf;
  G4double sxmax  = bmax.x()/cosHalf;
  G4double symax  = bmax.y()/cosHalf;

  G4double sinCur = sinHalf;
  G4double cosCur = cosHalf;
  G4ThreeVectorList baseA(NSTEPS),baseB(NSTEPS);
  for (G4int k=0; k<NSTEPS; ++k)
  {
    baseA[k].set(sxmax*cosCur,symax*sinCur,-zcut);
    baseB[k].set(sxmin*cosCur,symin*sinCur, zcut);
    
    G4double sinTmp = sinCur;
    sinCur = sinCur*cosStep + cosCur*sinStep;
    cosCur = cosCur*cosStep - sinTmp*sinStep;
  }

  std::vector<const G4ThreeVectorList *> polygons(2);
  polygons[0] = &baseA;
  polygons[1] = &baseB;
  G4BoundingEnvelope benv(bmin,bmax,polygons);
  exist = benv.CalculateExtent(pAxis,pVoxelLimit,pTransform,pMin,pMax);
  return exist;
}

//
// Return whether point inside/outside/on surface
// Split into radius, phi, theta checks
// Each check modifies `in', or returns as approprate
//
EInside G4EllipticalCone::Inside(const G4ThreeVector& p) const
{
  G4double rad2oo,  // outside surface outer tolerance
           rad2oi;  // outside surface inner tolerance
  
  EInside in;

  // check this side of z cut first, because that's fast
  //

  if ( (p.z() < -zTopCut - halfCarTol)
    || (p.z() > zTopCut + halfCarTol ) )
  {
    return in = kOutside; 
  }

  rad2oo= sqr(p.x()/( xSemiAxis + halfRadTol ))
        + sqr(p.y()/( ySemiAxis + halfRadTol ));

  if ( rad2oo > sqr( zheight-p.z() ) )
  {
    return in = kOutside; 
  }

  //  rad2oi= sqr( p.x()*(1.0 + 0.5*kRadTolerance/(xSemiAxis*xSemiAxis)) )
  //      + sqr( p.y()*(1.0 + 0.5*kRadTolerance/(ySemiAxis*ySemiAxis)) );
  rad2oi = sqr(p.x()/( xSemiAxis - halfRadTol ))
        + sqr(p.y()/( ySemiAxis - halfRadTol ));
     
  if (rad2oi < sqr( zheight-p.z() ) )
  {
    in = ( ( p.z() < -zTopCut + halfRadTol )
        || ( p.z() >  zTopCut - halfRadTol ) ) ? kSurface : kInside;
  }
  else 
  {
    in = kSurface;
  }

  return in;
}

//
// Return unit normal of surface closest to p not protected against p=0
//
G4ThreeVector G4EllipticalCone::SurfaceNormal( const G4ThreeVector& p) const
{

  G4double rx = sqr(p.x()/xSemiAxis), 
           ry = sqr(p.y()/ySemiAxis);

  G4double rds = std::sqrt(rx + ry); 

  G4ThreeVector norm;

  if( (p.z() < -zTopCut) && ((rx+ry) < sqr(zTopCut + zheight)) )
  {
    return G4ThreeVector( 0., 0., -1. ); 
  }

  if( (p.z() > (zheight > zTopCut ? zheight : zTopCut)) &&
      ((rx+ry) < sqr(zheight-zTopCut)) )
  {
    return G4ThreeVector( 0., 0., 1. );
  }

  if( p.z() > rds + 2.*zTopCut - zheight ) 
  {
    if ( p.z() > zTopCut )
    {
      if( p.x() == 0. ) 
      {
        norm = G4ThreeVector( 0., p.y() < 0. ? -1. : 1., 1. ); 
        return norm /= norm.mag();
      } 
      if( p.y() == 0. )
      {
        norm = G4ThreeVector( p.x() < 0. ? -1. : 1., 0., 1. ); 
        return norm /= norm.mag();
      } 
      
      G4double k =  std::fabs(p.x()/p.y());
      G4double c2 = sqr(zheight-zTopCut)/(1./sqr(xSemiAxis)+sqr(k/ySemiAxis));
      G4double x  = std::sqrt(c2);
      G4double y  = k*x;
        
      x /= sqr(xSemiAxis);
      y /= sqr(ySemiAxis);
      
      norm = G4ThreeVector( p.x() < 0. ? -x : x, 
                            p.y() < 0. ? -y : y,
                            - ( zheight - zTopCut ) );
      norm /= norm.mag();
      norm += G4ThreeVector( 0., 0., 1. );
      return norm /= norm.mag();      
    }
    
    return G4ThreeVector( 0., 0., 1. );    
  }
  
  if( p.z() < rds - 2.*zTopCut - zheight )
  {
    if( p.x() == 0. ) 
    {
      norm = G4ThreeVector( 0., p.y() < 0. ? -1. : 1., -1. ); 
      return norm /= norm.mag();
    } 
    if( p.y() == 0. )
    {
      norm = G4ThreeVector( p.x() < 0. ? -1. : 1., 0., -1. ); 
      return norm /= norm.mag();
    } 
    
    G4double k =  std::fabs(p.x()/p.y());
    G4double c2 = sqr(zheight+zTopCut)/(1./sqr(xSemiAxis)+sqr(k/ySemiAxis));
    G4double x  = std::sqrt(c2);
    G4double y  = k*x;
    
    x /= sqr(xSemiAxis);
    y /= sqr(ySemiAxis);
    
    norm = G4ThreeVector( p.x() < 0. ? -x : x, 
                          p.y() < 0. ? -y : y,
                          - ( zheight - zTopCut ) );
    norm /= norm.mag();
    norm += G4ThreeVector( 0., 0., -1. );
    return norm /= norm.mag();      
  }
    
  norm  = G4ThreeVector(p.x()/sqr(xSemiAxis), p.y()/sqr(ySemiAxis), rds);
   
  G4double k = std::tan(pi/8.);
  G4double c = -zTopCut - k*(zTopCut + zheight);

  if( p.z() < -k*rds + c )
    return G4ThreeVector (0.,0.,-1.);

  return norm /= norm.mag();
}

//
// Calculate distance to shape from outside, along normalised vector
// return kInfinity if no intersection, or intersection distance <= tolerance
//
G4double G4EllipticalCone::DistanceToIn( const G4ThreeVector& p,
                                         const G4ThreeVector& v  ) const
{
  G4double distMin = kInfinity;

  // code from EllipticalTube

  G4double sigz = p.z()+zTopCut;

  //
  // Check z = -dz planer surface
  //

  if (sigz < halfCarTol)
  {
    //
    // We are "behind" the shape in z, and so can
    // potentially hit the rear face. Correct direction?
    //
    if (v.z() <= 0)
    {
      //
      // As long as we are far enough away, we know we
      // can't intersect
      //
      if (sigz < 0) return kInfinity;
      
      //
      // Otherwise, we don't intersect unless we are
      // on the surface of the ellipse
      //

      if ( sqr(p.x()/( xSemiAxis - halfCarTol ))
         + sqr(p.y()/( ySemiAxis - halfCarTol )) <= sqr( zheight+zTopCut ) )
        return kInfinity;

    }
    else
    {
      //
      // How far?
      //
      G4double q = -sigz/v.z();
      
      //
      // Where does that place us?
      //
      G4double xi = p.x() + q*v.x(),
               yi = p.y() + q*v.y();
      
      //
      // Is this on the surface (within ellipse)?
      //
      if ( sqr(xi/xSemiAxis) + sqr(yi/ySemiAxis) <= sqr( zheight + zTopCut ) )
      {
        //
        // Yup. Return q, unless we are on the surface
        //
        return (sigz < -halfCarTol) ? q : 0;
      }
      else if (xi/(xSemiAxis*xSemiAxis)*v.x()
             + yi/(ySemiAxis*ySemiAxis)*v.y() >= 0)
      {
        //
        // Else, if we are traveling outwards, we know
        // we must miss
        //
        //        return kInfinity;
      }
    }
  }

  //
  // Check z = +dz planer surface
  //
  sigz = p.z() - zTopCut;
  
  if (sigz > -halfCarTol)
  {
    if (v.z() >= 0)
    {

      if (sigz > 0) return kInfinity;

      if ( sqr(p.x()/( xSemiAxis - halfCarTol ))
         + sqr(p.y()/( ySemiAxis - halfCarTol )) <= sqr( zheight-zTopCut ) )
        return kInfinity;

    }
    else {
      G4double q = -sigz/v.z();

      G4double xi = p.x() + q*v.x(),
               yi = p.y() + q*v.y();

      if ( sqr(xi/xSemiAxis) + sqr(yi/ySemiAxis) <= sqr( zheight - zTopCut ) )
      {
        return (sigz > -halfCarTol) ? q : 0;
      }
      else if (xi/(xSemiAxis*xSemiAxis)*v.x()
             + yi/(ySemiAxis*ySemiAxis)*v.y() >= 0)
      {
        //        return kInfinity;
      }
    }
  }


#if 0

  // check to see if Z plane is relevant
  //
  if (p.z() < -zTopCut - 0.5*kCarTolerance)
  {
    if (v.z() <= 0.0)
      return distMin; 

    G4double lambda = (-zTopCut - p.z())/v.z();
    
    if ( sqr((lambda*v.x()+p.x())/xSemiAxis) + 
         sqr((lambda*v.y()+p.y())/ySemiAxis) <=
         sqr(zTopCut + zheight + 0.5*kRadTolerance) ) 
    { 
      return distMin = std::fabs(lambda);    
    }
  }

  if (p.z() > zTopCut+0.5*kCarTolerance) 
  {
    if (v.z() >= 0.0)
      { return distMin; }

    G4double lambda  = (zTopCut - p.z()) / v.z();

    if ( sqr((lambda*v.x() + p.x())/xSemiAxis) + 
         sqr((lambda*v.y() + p.y())/ySemiAxis) <=
         sqr(zheight - zTopCut + 0.5*kRadTolerance) )
      {
        return distMin = std::fabs(lambda);
      }
  }
  
  if (p.z() > zTopCut - halfCarTol
   && p.z() < zTopCut + halfCarTol )
  {
    if (v.z() > 0.) 
      { return kInfinity; }

    return distMin = 0.;
  }
  
  if (p.z() < -zTopCut + halfCarTol
   && p.z() > -zTopCut - halfCarTol)
  {
    if (v.z() < 0.)
      { return distMin = kInfinity; }
    
    return distMin = 0.;
  }
  
#endif

  // if we are here then it either intersects or grazes the curved surface 
  // or it does not intersect at all
  //
  G4double A = sqr(v.x()/xSemiAxis) + sqr(v.y()/ySemiAxis) - sqr(v.z());
  G4double B = 2*(v.x()*p.x()/sqr(xSemiAxis) + 
                  v.y()*p.y()/sqr(ySemiAxis) + v.z()*(zheight-p.z()));
  G4double C = sqr(p.x()/xSemiAxis) + sqr(p.y()/ySemiAxis) - 
               sqr(zheight - p.z());
 
  G4double discr = B*B - 4.*A*C;
   
  // if the discriminant is negative it never hits the curved object
  //
  if ( discr < -halfCarTol )
    { return distMin; }
  
  // case below is when it hits or grazes the surface
  //
  if ( (discr >= - halfCarTol ) && (discr < halfCarTol ) )
  {
    return distMin = std::fabs(-B/(2.*A)); 
  }
  
  G4double plus  = (-B+std::sqrt(discr))/(2.*A);
  G4double minus = (-B-std::sqrt(discr))/(2.*A);
 
  // Special case::Point on Surface, Check norm.dot(v)

  if ( ( std::fabs(plus) < halfCarTol )||( std::fabs(minus) < halfCarTol ) )
  {
    G4ThreeVector truenorm(p.x()/(xSemiAxis*xSemiAxis),
                           p.y()/(ySemiAxis*ySemiAxis),
                           -( p.z() - zheight ));
    if ( truenorm*v >= 0)  //  going outside the solid from surface
    {
      return kInfinity;
    }
    else
    {
      return 0;
    }
  }

  // G4double lambda = std::fabs(plus) < std::fabs(minus) ? plus : minus;  
  G4double lambda = 0;

  if ( minus > halfCarTol && minus < distMin ) 
  {
    lambda = minus ;
    // check normal vector   n * v < 0
    G4ThreeVector pin = p + lambda*v;
    if(std::fabs(pin.z())<zTopCut+0.5*kCarTolerance)
    {
      G4ThreeVector truenorm(pin.x()/(xSemiAxis*xSemiAxis),
                             pin.y()/(ySemiAxis*ySemiAxis),
                             - ( pin.z() - zheight ));
      if ( truenorm*v < 0)
      {   // yes, going inside the solid
        distMin = lambda;
      }
    }
  }
  if ( plus > halfCarTol  && plus < distMin )
  {
    lambda = plus ;
    // check normal vector   n * v < 0
    G4ThreeVector pin = p + lambda*v;
    if(std::fabs(pin.z())<zTopCut+0.5*kCarTolerance)
    {
      G4ThreeVector truenorm(pin.x()/(xSemiAxis*xSemiAxis),
                             pin.y()/(ySemiAxis*ySemiAxis),
                             - ( pin.z() - zheight ) );
      if ( truenorm*v < 0)
      {   // yes, going inside the solid
        distMin = lambda;
      }
    }
  }
  if (distMin < halfCarTol) distMin=0.;
  return distMin ;
}

//
// Calculate distance (<= actual) to closest surface of shape from outside
// Return 0 if point inside
//
G4double G4EllipticalCone::DistanceToIn(const G4ThreeVector& p) const
{
  G4double distR, distR2, distZ, maxDim;
  G4double distRad;  

  // check if the point lies either below z=-zTopCut in bottom elliptical
  // region or on top within cut elliptical region
  //
  if( (p.z() <= -zTopCut) && (sqr(p.x()/xSemiAxis) + sqr(p.y()/ySemiAxis)
                           <= sqr(zTopCut + zheight + 0.5*kCarTolerance )) )
  {  
    //return distZ = std::fabs(zTopCut - p.z());
     return distZ = std::fabs(zTopCut + p.z());
  } 
  
  if( (p.z() >= zTopCut) && (sqr(p.x()/xSemiAxis)+sqr(p.y()/ySemiAxis)
                          <= sqr(zheight - zTopCut + kCarTolerance/2.0 )) )
  {
    return distZ = std::fabs(p.z() - zTopCut);
  } 
  
  // below we use the following approximation: we take the largest of the
  // axes and find the shortest distance to the circular (cut) cone of that
  // radius.  
  //
  maxDim = xSemiAxis >= ySemiAxis ? xSemiAxis:ySemiAxis;
  distRad = std::sqrt(p.x()*p.x()+p.y()*p.y());

  if( p.z() > maxDim*distRad + zTopCut*(1.+maxDim)-sqr(maxDim)*zheight )
  {
    distR2 = sqr(p.z() - zTopCut) + sqr(distRad - maxDim*(zheight - zTopCut));
    return std::sqrt( distR2 );
  } 

  if( distRad > maxDim*( zheight - p.z() ) )
  {
    if( p.z() > maxDim*distRad - (zTopCut*(1.+maxDim)+sqr(maxDim)*zheight) )
    {
      G4double zVal = (p.z()-maxDim*(distRad-maxDim*zheight))/(1.+sqr(maxDim));
      G4double rVal = maxDim*(zheight - zVal);
      return distR  = std::sqrt(sqr(p.z() - zVal) + sqr(distRad - rVal));
    }
  }

  if( distRad <= maxDim*(zheight - p.z()) )
  {
    distR2 = sqr(distRad - maxDim*(zheight + zTopCut)) + sqr(p.z() + zTopCut);
    return std::sqrt( distR2 );    
  }   
  
  return distR = 0;
}

//
// Calculate distance to surface of shape from `inside',
// allowing for tolerance
//
G4double G4EllipticalCone::DistanceToOut(const G4ThreeVector& p,
                                         const G4ThreeVector& v,
                                         const G4bool calcNorm,
                                               G4bool *validNorm,
                                               G4ThreeVector *n  ) const
{
  G4double distMin, lambda;
  enum surface_e {kPlaneSurf, kCurvedSurf, kNoSurf} surface;
  
  distMin = kInfinity;
  surface = kNoSurf;

  if (v.z() < 0.0)
  {
    lambda = (-p.z() - zTopCut)/v.z();

    if ( (sqr((p.x() + lambda*v.x())/xSemiAxis) + 
          sqr((p.y() + lambda*v.y())/ySemiAxis)) < 
          sqr(zheight + zTopCut + 0.5*kCarTolerance) )
    {
      distMin = std::fabs(lambda);

      if (!calcNorm) { return distMin; }
    } 
    distMin = std::fabs(lambda);
    surface = kPlaneSurf;
  }

  if (v.z() > 0.0)
  {
    lambda = (zTopCut - p.z()) / v.z();

    if ( (sqr((p.x() + lambda*v.x())/xSemiAxis)
        + sqr((p.y() + lambda*v.y())/ySemiAxis) )
       < (sqr(zheight - zTopCut + 0.5*kCarTolerance)) )
    {
      distMin = std::fabs(lambda);
      if (!calcNorm) { return distMin; }
    }
    distMin = std::fabs(lambda);
    surface = kPlaneSurf;
  }
  
  // if we are here then it either intersects or grazes the 
  // curved surface...
  //
  G4double A = sqr(v.x()/xSemiAxis) + sqr(v.y()/ySemiAxis) - sqr(v.z());
  G4double B = 2.*(v.x()*p.x()/sqr(xSemiAxis) +  
                   v.y()*p.y()/sqr(ySemiAxis) + v.z()*(zheight-p.z()));
  G4double C = sqr(p.x()/xSemiAxis) + sqr(p.y()/ySemiAxis)
             - sqr(zheight - p.z());
 
  G4double discr = B*B - 4.*A*C;
  
  if ( discr >= - 0.5*kCarTolerance && discr < 0.5*kCarTolerance )
  { 
    if(!calcNorm) { return distMin = std::fabs(-B/(2.*A)); }
  }

  else if ( discr > 0.5*kCarTolerance )
  {
    G4double plus  = (-B+std::sqrt(discr))/(2.*A);
    G4double minus = (-B-std::sqrt(discr))/(2.*A);

    if ( plus > 0.5*kCarTolerance && minus > 0.5*kCarTolerance )
    {
      // take the shorter distance
      //
      lambda   = std::fabs(plus) < std::fabs(minus) ? plus : minus;
    }
    else
    {
      // at least one solution is close to zero or negative
      // so, take small positive solution or zero 
      //
      lambda   = plus > -0.5*kCarTolerance ? plus : 0;
    }

    if ( std::fabs(lambda) < distMin )
    {
      if( std::fabs(lambda) > 0.5*kCarTolerance)
      {
        distMin  = std::fabs(lambda);
        surface  = kCurvedSurf;
      }
      else  // Point is On the Surface, Check Normal
      {
        G4ThreeVector truenorm(p.x()/(xSemiAxis*xSemiAxis),
                               p.y()/(ySemiAxis*ySemiAxis),
                               -( p.z() - zheight ));
        if( truenorm.dot(v) > 0 )
        {
          distMin  = 0.0;
          surface  = kCurvedSurf;
        }
      } 
    }
  }

  // set normal if requested
  //
  if (calcNorm)
  {
    if (surface == kNoSurf)
    {
      *validNorm = false;
    }
    else
    {
      *validNorm = true;
      switch (surface)
      {
        case kPlaneSurf:
        {
          *n = G4ThreeVector(0.,0.,(v.z() > 0.0 ? 1. : -1.));
        }
        break;

        case kCurvedSurf:
        {
          G4ThreeVector pexit = p + distMin*v;
          G4ThreeVector truenorm( pexit.x()/(xSemiAxis*xSemiAxis),
                                  pexit.y()/(ySemiAxis*ySemiAxis),
                                  -( pexit.z() - zheight ) );
          truenorm /= truenorm.mag();
          *n= truenorm;
        } 
        break;

        default:            // Should never reach this case ...
          DumpInfo();
          std::ostringstream message;
          G4int oldprc = message.precision(16);
          message << "Undefined side for valid surface normal to solid."
                  << G4endl
                  << "Position:"  << G4endl
                  << "   p.x() = "   << p.x()/mm << " mm" << G4endl
                  << "   p.y() = "   << p.y()/mm << " mm" << G4endl
                  << "   p.z() = "   << p.z()/mm << " mm" << G4endl
                  << "Direction:" << G4endl
                  << "   v.x() = "   << v.x() << G4endl
                  << "   v.y() = "   << v.y() << G4endl
                  << "   v.z() = "   << v.z() << G4endl
                  << "Proposed distance :" << G4endl
                  << "   distMin = "    << distMin/mm << " mm";
          message.precision(oldprc);
          G4Exception("G4EllipticalCone::DistanceToOut(p,v,..)",
                      "GeomSolids1002", JustWarning, message);
          break;
      }
    }
  }

  if (distMin<0.5*kCarTolerance) { distMin=0; }

  return distMin;
}

//
// Calculate distance (<=actual) to closest surface of shape from inside
//
G4double G4EllipticalCone::DistanceToOut(const G4ThreeVector& p) const
{
#ifdef G4SPECSDEBUG
  if( Inside(p) == kOutside )
  {
     DumpInfo();
     std::ostringstream message;
     G4int oldprc = message.precision(16);
     message << "Point p is outside !?" << G4endl
             << "Position:"  << G4endl
             << "   p.x() = "   << p.x()/mm << " mm" << G4endl
             << "   p.y() = "   << p.y()/mm << " mm" << G4endl
             << "   p.z() = "   << p.z()/mm << " mm";
     message.precision(oldprc) ;
     G4Exception("G4Ellipsoid::DistanceToOut(p)", "GeomSolids1002",
                 JustWarning, message);
  }
#endif
  // The safety is calculated in the scaled space where elliptical cone
  // becomes a circular cone with radius equal to the smaller of the axes 
  //
  G4double px = p.x(), py = p.y(), pz = p.z();
  G4double axis;
  if (xSemiAxis < ySemiAxis)
  {
    axis = xSemiAxis;
    py  *= xSemiAxis/ySemiAxis; // scale y
  }
  else
  {
    axis = ySemiAxis;
    px  *= ySemiAxis/xSemiAxis; // scale x
  }

  G4double distZ = zTopCut - std::abs(pz) ;
  if (distZ <= 0) return 0; // point is outside 

  G4double rho = axis*(zheight-pz); // radius at z = p.z()
  G4double pr  = std::sqrt(px*px+py*py);
  if (pr >= rho)  return 0; // point is outside

  G4double distR = (rho-pr)/std::sqrt(1+axis*axis);
  return std::min(distR,distZ);
}

//
// GetEntityType
//
G4GeometryType G4EllipticalCone::GetEntityType() const
{
  return G4String("G4EllipticalCone");
}

//
// Make a clone of the object
//
G4VSolid* G4EllipticalCone::Clone() const
{
  return new G4EllipticalCone(*this);
}

//
// Stream object contents to an output stream
//
std::ostream& G4EllipticalCone::StreamInfo( std::ostream& os ) const
{
  G4int oldprc = os.precision(16);
  os << "-----------------------------------------------------------\n"
     << "    *** Dump for solid - " << GetName() << " ***\n"
     << "    ===================================================\n"
     << " Solid type: G4EllipticalCone\n"
     << " Parameters: \n"

     << "    semi-axis x: " << xSemiAxis/mm << " mm \n"
     << "    semi-axis y: " << ySemiAxis/mm << " mm \n"
     << "    height    z: " << zheight/mm << " mm \n"
     << "    half length in  z: " << zTopCut/mm << " mm \n"
     << "-----------------------------------------------------------\n";
  os.precision(oldprc);

  return os;
}

//
// GetPointOnSurface
//
// returns quasi-uniformly distributed point on surface of elliptical cone
//
G4ThreeVector G4EllipticalCone::GetPointOnSurface() const
{

  G4double phi, sinphi, cosphi, aOne, aTwo, aThree,
           chose, zRand, rRand1, rRand2;
  
  G4double rOne = std::sqrt(sqr(xSemiAxis)
                + sqr(ySemiAxis))*(zheight - zTopCut);
  G4double rTwo = std::sqrt(sqr(xSemiAxis)
                + sqr(ySemiAxis))*(zheight + zTopCut);

  G4int it1=0, it2=0;
  
  aOne   = pi*(rOne + rTwo)*std::sqrt(sqr(rOne - rTwo)+sqr(2.*zTopCut));
  aTwo   = pi*xSemiAxis*ySemiAxis*sqr(zheight+zTopCut);
  aThree = pi*xSemiAxis*ySemiAxis*sqr(zheight-zTopCut);  

  phi = G4RandFlat::shoot(0.,twopi);
  cosphi = std::cos(phi);
  sinphi = std::sin(phi);
  
  if(zTopCut >= zheight) aThree = 0.;

  chose = G4RandFlat::shoot(0.,aOne+aTwo+aThree);
  if((chose>=0.) && (chose<aOne))
  {
    zRand = G4RandFlat::shoot(-zTopCut,zTopCut);
    return G4ThreeVector(xSemiAxis*(zheight-zRand)*cosphi,
                         ySemiAxis*(zheight-zRand)*sinphi,zRand);    
  }
  else if((chose>=aOne) && (chose<aOne+aTwo))
  {
    do    // Loop checking, 13.08.2015, G.Cosmo
    {
      rRand1 = G4RandFlat::shoot(0.,1.) ;
      rRand2 = G4RandFlat::shoot(0.,1.) ;
    } while (( rRand2 >= rRand1  ) && (++it1 < 1000)) ;

    return G4ThreeVector(rRand1*xSemiAxis*(zheight+zTopCut)*cosphi,
                         rRand1*ySemiAxis*(zheight+zTopCut)*sinphi, -zTopCut);

  }
  // else
  //

  do    // Loop checking, 13.08.2015, G.Cosmo
  {
    rRand1 = G4RandFlat::shoot(0.,1.) ;
    rRand2 = G4RandFlat::shoot(0.,1.) ;
  } while (( rRand2 >= rRand1  ) && (++it2 < 1000));

  return G4ThreeVector(rRand1*xSemiAxis*(zheight-zTopCut)*cosphi,
                       rRand1*ySemiAxis*(zheight-zTopCut)*sinphi, zTopCut);
}

//
// Methods for visualisation
//

void G4EllipticalCone::DescribeYourselfTo (G4VGraphicsScene& scene) const
{
  scene.AddSolid(*this);
}

G4VisExtent G4EllipticalCone::GetExtent() const
{
  // Define the sides of the box into which the solid instance would fit.
  //
  G4ThreeVector pmin,pmax;
  Extent(pmin,pmax);
  return G4VisExtent(pmin.x(),pmax.x(),
                     pmin.y(),pmax.y(),
                     pmin.z(),pmax.z());
}

G4Polyhedron* G4EllipticalCone::CreatePolyhedron () const
{
  return new G4PolyhedronEllipticalCone(xSemiAxis, ySemiAxis, zheight, zTopCut);
}

G4Polyhedron* G4EllipticalCone::GetPolyhedron () const
{
  if ( (!fpPolyhedron)
    || fRebuildPolyhedron
    || (fpPolyhedron->GetNumberOfRotationStepsAtTimeOfCreation() !=
        fpPolyhedron->GetNumberOfRotationSteps()) )
    {
      G4AutoLock l(&polyhedronMutex);
      delete fpPolyhedron;
      fpPolyhedron = CreatePolyhedron();
      fRebuildPolyhedron = false;
      l.unlock();
    }
  return fpPolyhedron;
}