Geant4  10.03
DICOM.cc
Go to the documentation of this file.
1 //
2 // ********************************************************************
3 // * License and Disclaimer *
4 // * *
5 // * The Geant4 software is copyright of the Copyright Holders of *
6 // * the Geant4 Collaboration. It is provided under the terms and *
7 // * conditions of the Geant4 Software License, included in the file *
8 // * LICENSE and available at http://cern.ch/geant4/license . These *
9 // * include a list of copyright holders. *
10 // * *
11 // * Neither the authors of this software system, nor their employing *
12 // * institutes,nor the agencies providing financial support for this *
13 // * work make any representation or warranty, express or implied, *
14 // * regarding this software system or assume any liability for its *
15 // * use. Please see the license in the file LICENSE and URL above *
16 // * for the full disclaimer and the limitation of liability. *
17 // * *
18 // * This code implementation is the result of the scientific and *
19 // * technical work of the GEANT4 collaboration. *
20 // * By using, copying, modifying or distributing the software (or *
21 // * any work based on the software) you agree to acknowledge its *
22 // * use in resulting scientific publications, and indicate your *
23 // * acceptance of all terms of the Geant4 Software license. *
24 // ********************************************************************
25 //
26 // $Id: DICOM.cc 101109 2016-11-07 08:14:53Z gcosmo $
27 //
30 //
31 // The code was written by :
32 // *Louis Archambault louis.archambault@phy.ulaval.ca,
33 // *Luc Beaulieu beaulieu@phy.ulaval.ca
34 // +Vincent Hubert-Tremblay at tigre.2@sympatico.ca
35 //
36 //
37 // *Centre Hospitalier Universitaire de Quebec (CHUQ),
38 // Hotel-Dieu de Quebec, departement de Radio-oncologie
39 // 11 cote du palais. Quebec, QC, Canada, G1R 2J6
40 // tel (418) 525-4444 #6720
41 // fax (418) 691 5268
42 //
43 // + Université Laval, Québec (QC) Canada
44 // *******************************************************
45 
46 
47 #ifdef G4MULTITHREADED
48 #include "G4MTRunManager.hh"
49 #else
50 #include "G4RunManager.hh"
51 #endif
52 
53 #include "globals.hh"
54 #include "G4UImanager.hh"
55 #include "Randomize.hh"
56 
57 #include "G4GenericPhysicsList.hh"
58 
62 
64 
65 #ifdef G4_DCMTK
66 #include "DicomFileMgr.hh"
67 #else
68 #include "DicomHandler.hh"
69 #endif
70 
71 #include "DicomIntersectVolume.hh"
72 #include "QGSP_BIC.hh"
73 #include "G4tgrMessenger.hh"
74 
75 #ifdef G4VIS_USE
76 #include "G4VisExecutive.hh"
77 #endif
78 
79 #ifdef G4UI_USE
80 #include "G4UIExecutive.hh"
81 #endif
82 #include "Shielding.hh"
83 
84 //=================================================================================
85 
86 int main(int argc,char** argv)
87 {
88 
89  new G4tgrMessenger;
90  char* part = getenv( "DICOM_PARTIAL_PARAM" );
91  G4bool bPartial = FALSE;
92  if( part && G4String(part) == "1" ) {
93  bPartial = TRUE;
94  }
95 
96  CLHEP::HepRandom::setTheEngine(new CLHEP::RanecuEngine);
97  CLHEP::HepRandom::setTheSeed(24534575684783);
98  long seeds[2];
99  seeds[0] = 534524575674523;
100  seeds[1] = 526345623452457;
101  CLHEP::HepRandom::setTheSeeds(seeds);
102 
103  // Construct the default run manager
104 #ifdef G4MULTITHREADED
105  char* nthread_c = getenv("DICOM_NTHREADS");
106 
107  unsigned nthreads = 4;
108  unsigned env_threads = 0;
109 
110  if(nthread_c) { env_threads = G4UIcommand::ConvertToDouble(nthread_c); }
111  if(env_threads > 0) { nthreads = env_threads; }
112 
113  G4MTRunManager* runManager = new G4MTRunManager;
114  runManager->SetNumberOfThreads(nthreads);
115 
116  G4cout << "\n\n\tDICOM running in multithreaded mode with " << nthreads
117  << " threads\n\n" << G4endl;
118 
119 
120 #else
121  G4RunManager* runManager = new G4RunManager;
122  G4cout << "\n\n\tDICOM running in serial mode\n\n" << G4endl;
123 
124 #endif
125 
126  DicomDetectorConstruction* theGeometry = 0;
127 
128 #ifdef G4_DCMTK
129  DicomFileMgr* theFileMgr = 0;
130 #else
131  DicomHandler* dcmHandler = 0;
132 #endif
133 
134  if( !bPartial ){
135 #ifdef G4_DCMTK
136 
137  theFileMgr = DicomFileMgr::GetInstance();
138  theFileMgr->Convert("Data.dat");
139 
140 #else
141  // Treatment of DICOM images before creating the G4runManager
142  dcmHandler = new DicomHandler;
143  dcmHandler->CheckFileFormat();
144 #endif
145 
146  // Initialisation of physics, geometry, primary particles ...
147  char* nest = getenv( "DICOM_NESTED_PARAM" );
148  if( nest && G4String(nest) == "1" ) {
149  theGeometry = new DicomNestedParamDetectorConstruction();
150  } else {
151  theGeometry = new DicomRegularDetectorConstruction();
152  }
153  } else {
154  theGeometry = new DicomPartialDetectorConstruction();
155  }
156  runManager->SetUserInitialization(theGeometry);
157 
158  // std::vector<G4String>* MyConstr = new std::vector<G4String>;
159  // MyConstr->push_back("G4EmStandardPhysics");
160  // G4VModularPhysicsList* phys = new G4GenericPhysicsList(MyConstr);
161  G4VModularPhysicsList* phys = new Shielding();
162  runManager->SetUserInitialization(phys);
163 
164  // Set user action classes
166 
167  runManager->Initialize();
168 
169  new DicomIntersectVolume();
170 
171 #ifdef G4VIS_USE
172  // visualisation manager
173  G4VisManager* visManager = new G4VisExecutive;
174  visManager->Initialize();
175 #endif
176 
177 
178  G4UImanager* UImanager = G4UImanager::GetUIpointer();
179 
180 
181  if (argc==1)
182  {
183 #ifdef G4UI_USE
184  G4UIExecutive* ui = new G4UIExecutive(argc, argv);
185 #ifdef G4VIS_USE
186  UImanager->ApplyCommand("/control/execute vis.mac");
187 #endif
188  ui->SessionStart();
189  delete ui;
190 #endif
191  }
192  else
193  {
194  G4String command = "/control/execute ";
195  G4String fileName = argv[1];
196  UImanager->ApplyCommand(command+fileName);
197  }
198 
199  delete runManager;
200 
201 #ifdef G4VIS_USE
202  delete visManager;
203 #endif
204 
205  if( !bPartial ) {
206 #ifdef G4_DCMTK
207  delete theFileMgr;
208 #else
209  delete dcmHandler;
210 #endif
211  }
212 
213  return 0;
214 }
215 
Definition of the DicomNestedParamDetectorConstruction class.
virtual void SetUserInitialization(G4VUserDetectorConstruction *userInit)
Definition of the DicomRegularDetectorConstruction class.
void SetNumberOfThreads(G4int n)
TShielding< G4VModularPhysicsList > Shielding
Definition: Shielding.hh:68
Construct the phantom using DicomPhantomParameterisationColour.
static G4UImanager * GetUIpointer()
Definition: G4UImanager.cc:58
Manages intersections of DICOM files with volumes.
G4GLOB_DLL std::ostream G4cout
Definition of the DicomPartialDetectorConstruction class.
bool G4bool
Definition: G4Types.hh:79
#define FALSE
Definition: globals.hh:52
static G4double ConvertToDouble(const char *st)
Definition: G4UIcommand.cc:443
#define TRUE
Definition: globals.hh:55
void Initialize()
Definition of the DicomActionInitialization class.
Definition of the DicomIntersectVolume class.
DicomRegularDetectorConstruction class.
Definition of the DicomHandler class.
virtual void Initialize()
#define G4endl
Definition: G4ios.hh:61
int main(int argc, char **argv)
Definition: DICOM.cc:86
void CheckFileFormat()
Construct a DICOM Geant4 geometry produced from the intersetion of a DICOM file and a volume...
void Convert(G4String fFileName)
Definition: DicomFileMgr.cc:59
G4int ApplyCommand(const char *aCommand)
Definition: G4UImanager.cc:446
static DicomFileMgr * GetInstance()
Definition: DicomFileMgr.cc:41