Geant4  10.00.p01
G4ParameterisationCons.cc
Go to the documentation of this file.
1 //
2 // ********************************************************************
3 // * License and Disclaimer *
4 // * *
5 // * The Geant4 software is copyright of the Copyright Holders of *
6 // * the Geant4 Collaboration. It is provided under the terms and *
7 // * conditions of the Geant4 Software License, included in the file *
8 // * LICENSE and available at http://cern.ch/geant4/license . These *
9 // * include a list of copyright holders. *
10 // * *
11 // * Neither the authors of this software system, nor their employing *
12 // * institutes,nor the agencies providing financial support for this *
13 // * work make any representation or warranty, express or implied, *
14 // * regarding this software system or assume any liability for its *
15 // * use. Please see the license in the file LICENSE and URL above *
16 // * for the full disclaimer and the limitation of liability. *
17 // * *
18 // * This code implementation is the result of the scientific and *
19 // * technical work of the GEANT4 collaboration. *
20 // * By using, copying, modifying or distributing the software (or *
21 // * any work based on the software) you agree to acknowledge its *
22 // * use in resulting scientific publications, and indicate your *
23 // * acceptance of all terms of the Geant4 Software license. *
24 // ********************************************************************
25 //
26 //
27 // $Id: G4ParameterisationCons.cc 66356 2012-12-18 09:02:32Z gcosmo $
28 //
29 // class G4ParameterisationCons Implementation file
30 //
31 // 26.05.03 - P.Arce, Initial version
32 // 08.04.04 - I.Hrivnacova, Implemented reflection
33 // 21.04.10 - M.Asai, Added gaps
34 // --------------------------------------------------------------------
35 
37 
38 #include <iomanip>
39 #include "G4ThreeVector.hh"
40 #include "G4RotationMatrix.hh"
41 #include "G4VPhysicalVolume.hh"
42 #include "G4LogicalVolume.hh"
43 #include "G4ReflectedSolid.hh"
44 #include "G4Cons.hh"
45 
46 //--------------------------------------------------------------------------
49  G4double offset, G4VSolid* msolid,
50  DivisionType divType )
51  : G4VDivisionParameterisation( axis, nDiv, width, offset, divType, msolid )
52 {
53  G4Cons* msol = (G4Cons*)(msolid);
54  if (msolid->GetEntityType() == "G4ReflectedSolid")
55  {
56  // Get constituent solid
57  G4VSolid* mConstituentSolid
58  = ((G4ReflectedSolid*)msolid)->GetConstituentMovedSolid();
59  msol = (G4Cons*)(mConstituentSolid);
60 
61  // Create a new solid with inversed parameters
62  G4Cons* newSolid
63  = new G4Cons(msol->GetName(),
66  msol->GetZHalfLength(),
67  msol->GetStartPhiAngle(), msol->GetDeltaPhiAngle());
68  msol = newSolid;
69  fmotherSolid = newSolid;
70  fReflectedSolid = true;
71  fDeleteSolid = true;
72  }
73 }
74 
75 //------------------------------------------------------------------------
77 {
78 }
79 
80 //--------------------------------------------------------------------------
83  G4double width, G4double offset,
84  G4VSolid* msolid, DivisionType divType )
85  : G4VParameterisationCons( axis, nDiv, width, offset, msolid, divType )
86 {
88  SetType( "DivisionConsRho" );
89 
90  G4Cons* msol = (G4Cons*)(fmotherSolid);
91  if( msol->GetInnerRadiusPlusZ() == 0. )
92  {
93  std::ostringstream message;
94  message << "OuterRadiusMinusZ = 0" << G4endl
95  << "Width is calculated as that of OuterRadiusMinusZ !";
96  G4Exception("G4ParameterisationConsRho::G4ParameterisationConsRho()",
97  "GeomDiv1001", JustWarning, message);
98  }
99 
100  if( divType == DivWIDTH )
101  {
103  - msol->GetInnerRadiusMinusZ(), width, offset );
104  }
105  else if( divType == DivNDIV )
106  {
107  G4Cons* mconsol = (G4Cons*)(msolid);
109  - mconsol->GetInnerRadiusMinusZ(), nDiv, offset );
110  }
111 
112 #ifdef G4DIVDEBUG
113  if( verbose >= 1 )
114  {
115  G4cout << " G4ParameterisationConsRho - no divisions " << fnDiv << " = "
116  << nDiv << G4endl
117  << " Offset " << foffset << " = " << offset
118  << " - Width " << fwidth << " = " << width << G4endl;
119  }
120 #endif
121 }
122 
123 //--------------------------------------------------------------------------
125 {
126 }
127 
128 //------------------------------------------------------------------------
130 {
131  G4Cons* msol = (G4Cons*)(fmotherSolid);
132  return msol->GetOuterRadiusMinusZ() - msol->GetInnerRadiusMinusZ();
133 }
134 
135 //--------------------------------------------------------------------------
136 void
139 {
140  //----- translation
141  G4ThreeVector origin(0.,0.,0.);
142  //----- set translation
143  physVol->SetTranslation( origin );
144 
145  //----- calculate rotation matrix: unit
146 
147 #ifdef G4DIVDEBUG
148  if( verbose >= 2 )
149  {
150  G4cout << " G4ParameterisationConsRho " << G4endl
151  << " Offset: " << foffset
152  << " - Width: " << fwidth << G4endl;
153  }
154 #endif
155 
156  ChangeRotMatrix( physVol );
157 
158 #ifdef G4DIVDEBUG
159  if( verbose >= 2 )
160  {
161  G4cout << std::setprecision(8) << " G4ParameterisationConsRho" << G4endl
162  << " Position: " << origin << " - Width: " << fwidth
163  << " - Axis: " << faxis << G4endl;
164  }
165 #endif
166 }
167 
168 //--------------------------------------------------------------------------
169 void
171 ComputeDimensions( G4Cons& cons, const G4int copyNo,
172  const G4VPhysicalVolume* ) const
173 {
174  G4Cons* msol = (G4Cons*)(fmotherSolid);
175 
176  G4double pRMin1 = msol->GetInnerRadiusMinusZ() + foffset + fwidth * copyNo;
177  G4double pRMax1 = msol->GetInnerRadiusMinusZ() + foffset + fwidth * (copyNo+1);
178 
179  //width at Z Plus
180  //- G4double fwidthPlus =
181  // fwidth * ( msol->GetOuterRadiusPlusZ()/ msol->GetInnerRadiusPlusZ())
182  //- / ( msol->GetOuterRadiusMinusZ() - msol->GetInnerRadiusMinusZ());
183  G4double fwidthPlus = CalculateWidth( msol->GetOuterRadiusPlusZ()
184  - msol->GetInnerRadiusPlusZ(), fnDiv, foffset );
185  G4double pRMin2 = msol->GetInnerRadiusPlusZ()
186  + foffset + fwidthPlus * copyNo;
187  G4double pRMax2 = msol->GetInnerRadiusPlusZ()
188  + foffset + fwidthPlus * (copyNo+1);
189  G4double pDz = msol->GetZHalfLength();
190 
191  G4double d_half_gap = fhgap * pRMax2 / pRMax1;
192  //- already rotated double pSR = foffset + copyNo*fwidth;
193  G4double pSPhi = msol->GetStartPhiAngle();
194  G4double pDPhi = msol->GetDeltaPhiAngle();;
195 
196  cons.SetInnerRadiusMinusZ( pRMin1 + fhgap );
197  cons.SetOuterRadiusMinusZ( pRMax1 - fhgap );
198  cons.SetInnerRadiusPlusZ( pRMin2 + d_half_gap );
199  cons.SetOuterRadiusPlusZ( pRMax2 - d_half_gap );
200  cons.SetZHalfLength( pDz );
201  cons.SetStartPhiAngle( pSPhi, false );
202  cons.SetDeltaPhiAngle( pDPhi );
203 
204 #ifdef G4DIVDEBUG
205  if( verbose >= 2 )
206  {
207  G4cout << " G4ParameterisationConsRho::ComputeDimensions()" << G4endl
208  << " pRMin: " << pRMin1 << " - pRMax: " << pRMax1 << G4endl;
209  if( verbose >= 4 ) cons.DumpInfo();
210  }
211 #endif
212 }
213 
214 //--------------------------------------------------------------------------
217  G4double width, G4double offset,
218  G4VSolid* msolid, DivisionType divType )
219  : G4VParameterisationCons( axis, nDiv, width, offset, msolid, divType )
220 {
222  SetType( "DivisionConsPhi" );
223 
224  G4Cons* msol = (G4Cons*)(fmotherSolid);
225  if( divType == DivWIDTH )
226  {
227  fnDiv = CalculateNDiv( msol->GetDeltaPhiAngle(), width, offset );
228  }
229  else if( divType == DivNDIV )
230  {
231  fwidth = CalculateWidth( msol->GetDeltaPhiAngle(), nDiv, offset );
232  }
233 
234 #ifdef G4DIVDEBUG
235  if( verbose >= 1 )
236  {
237  G4cout << " G4ParameterisationConsPhi no divisions " << fnDiv << " = "
238  << nDiv << G4endl
239  << " Offset " << foffset << " = " << offset << G4endl
240  << " Width " << fwidth << " = " << width << G4endl;
241  }
242 #endif
243 }
244 
245 //--------------------------------------------------------------------------
247 {
248 }
249 
250 //------------------------------------------------------------------------
252 {
253  G4Cons* msol = (G4Cons*)(fmotherSolid);
254  return msol->GetDeltaPhiAngle();
255 }
256 
257 //--------------------------------------------------------------------------
258 void
260 ComputeTransformation( const G4int copyNo, G4VPhysicalVolume *physVol ) const
261 {
262  //----- translation
263  G4ThreeVector origin(0.,0.,0.);
264  //----- set translation
265  physVol->SetTranslation( origin );
266 
267  //----- calculate rotation matrix (so that all volumes point to the centre)
268  G4double posi = foffset + copyNo*fwidth;
269 
270 #ifdef G4DIVDEBUG
271  if( verbose >= 2 )
272  {
273  G4cout << " G4ParameterisationConsPhi - position: " << posi/deg << G4endl
274  << " Origin: " << origin << " copyNo: " << copyNo
275  << " - foffset: " << foffset/deg
276  << " - fwidth: " << fwidth/deg << G4endl
277  << " - Axis: " << faxis << G4endl;
278  }
279 #endif
280 
281  ChangeRotMatrix( physVol, -posi );
282 }
283 
284 //--------------------------------------------------------------------------
285 void
288  const G4VPhysicalVolume* ) const
289 {
290  G4Cons* msol = (G4Cons*)(fmotherSolid);
291 
292  G4double pRMin1 = msol->GetInnerRadiusMinusZ();
293  G4double pRMax1 = msol->GetOuterRadiusMinusZ();
294  G4double pRMin2 = msol->GetInnerRadiusPlusZ();
295  G4double pRMax2 = msol->GetOuterRadiusPlusZ();
296  G4double pDz = msol->GetZHalfLength();
297 
298  //- already rotated double pSPhi = foffset + copyNo*fwidth;
299  G4double pSPhi = foffset + msol->GetStartPhiAngle() + fhgap;
300  G4double pDPhi = fwidth - 2.*fhgap;
301 
302  cons.SetInnerRadiusMinusZ( pRMin1 );
303  cons.SetOuterRadiusMinusZ( pRMax1 );
304  cons.SetInnerRadiusPlusZ( pRMin2 );
305  cons.SetOuterRadiusPlusZ( pRMax2 );
306  cons.SetZHalfLength( pDz );
307  cons.SetStartPhiAngle( pSPhi, false );
308  cons.SetDeltaPhiAngle( pDPhi );
309 
310 #ifdef G4DIVDEBUG
311  if( verbose >= 2 )
312  {
313  G4cout << " G4ParameterisationConsPhi::ComputeDimensions" << G4endl
314  << " pSPhi: " << pSPhi << " - pDPhi: " << pDPhi << G4endl;
315  if( verbose >= 4 ) cons.DumpInfo();
316  }
317 #endif
318 }
319 
320 //--------------------------------------------------------------------------
323  G4double width, G4double offset,
324  G4VSolid* msolid, DivisionType divType )
325  : G4VParameterisationCons( axis, nDiv, width, offset, msolid, divType )
326 {
328  SetType( "DivisionConsZ" );
329 
330  G4Cons* msol = (G4Cons*)(fmotherSolid);
331  if( divType == DivWIDTH )
332  {
333  fnDiv = CalculateNDiv( 2*msol->GetZHalfLength(), width, offset );
334  }
335  else if( divType == DivNDIV )
336  {
337  fwidth = CalculateWidth( 2*msol->GetZHalfLength(), nDiv, offset );
338  }
339 
340 #ifdef G4DIVDEBUG
341  if( verbose >= 1 )
342  {
343  G4cout << " G4ParameterisationConsZ: # divisions " << fnDiv << " = "
344  << nDiv << G4endl
345  << " Offset " << foffset << " = " << offset << G4endl
346  << " Width " << fwidth << " = " << width << G4endl
347  << " - Axis: " << faxis << G4endl;
348  }
349 #endif
350 }
351 
352 //--------------------------------------------------------------------------
354 {
355 }
356 
357 //------------------------------------------------------------------------
359 {
360  G4Cons* msol = (G4Cons*)(fmotherSolid);
361  return 2*msol->GetZHalfLength();
362 }
363 
364 //--------------------------------------------------------------------------
365 void
367 ComputeTransformation( const G4int copyNo, G4VPhysicalVolume* physVol ) const
368 {
369  //----- set translation: along Z axis
370  G4Cons* motherCons = (G4Cons*)(GetMotherSolid());
371  G4double posi = - motherCons->GetZHalfLength() + OffsetZ()
372  + fwidth/2 + copyNo*fwidth;
373  G4ThreeVector origin(0.,0.,posi);
374  physVol->SetTranslation( origin );
375 
376  //----- calculate rotation matrix: unit
377 
378 #ifdef G4DIVDEBUG
379  if( verbose >= 2 )
380  {
381  G4cout << " G4ParameterisationConsZ::ComputeTransformation()" << G4endl
382  << " Origin: " << origin << " - copyNo: " << copyNo << G4endl
383  << " foffset: " << foffset << " - fwidth: " << fwidth
384  << G4endl;
385  }
386 #endif
387 
388  ChangeRotMatrix( physVol );
389 }
390 
391 
392 //--------------------------------------------------------------------------
393 void
395 ComputeDimensions( G4Cons& cons, const G4int copyNo,
396  const G4VPhysicalVolume* ) const
397 {
398  G4Cons* msol = (G4Cons*)(fmotherSolid);
399 
400  G4double mHalfLength = msol->GetZHalfLength() - fhgap;
401  G4double aRInner = (msol->GetInnerRadiusPlusZ()
402  - msol->GetInnerRadiusMinusZ()) / (2*mHalfLength);
403  G4double bRInner = (msol->GetInnerRadiusPlusZ()
404  + msol->GetInnerRadiusMinusZ()) / 2;
405  G4double aROuter = (msol->GetOuterRadiusPlusZ()
406  - msol->GetOuterRadiusMinusZ()) / (2*mHalfLength);
407  G4double bROuter = (msol->GetOuterRadiusPlusZ()
408  + msol->GetOuterRadiusMinusZ()) / 2;
409  G4double xMinusZ = -mHalfLength + OffsetZ() + fwidth*copyNo + fhgap;
410  G4double xPlusZ = -mHalfLength + OffsetZ() + fwidth*(copyNo+1) - fhgap;
411  cons.SetInnerRadiusMinusZ( aRInner * xMinusZ + bRInner );
412  cons.SetOuterRadiusMinusZ( aROuter * xMinusZ + bROuter );
413  cons.SetInnerRadiusPlusZ( aRInner * xPlusZ + bRInner );
414  cons.SetOuterRadiusPlusZ( aROuter * xPlusZ + bROuter );
415 
416  G4double pDz = fwidth / 2. - fhgap;
417  G4double pSPhi = msol->GetStartPhiAngle();
418  G4double pDPhi = msol->GetDeltaPhiAngle();
419 
420  cons.SetZHalfLength( pDz );
421  cons.SetStartPhiAngle( pSPhi, false );
422  cons.SetDeltaPhiAngle( pDPhi );
423 
424 #ifdef G4DIVDEBUG
425  if( verbose >= 2 )
426  {
427  G4cout << " G4ParameterisationConsZ::ComputeDimensions()" << G4endl
428  << " pDz: " << pDz << G4endl;
429  if( verbose >= 4 ) cons.DumpInfo();
430  }
431 #endif
432 
433 }
void ComputeDimensions(G4Cons &tubs, const G4int copyNo, const G4VPhysicalVolume *physVol) const
void SetZHalfLength(G4double newDz)
G4String GetName() const
void SetInnerRadiusMinusZ(G4double Rmin1)
CLHEP::Hep3Vector G4ThreeVector
void SetType(const G4String &type)
void ComputeDimensions(G4Cons &tubs, const G4int copyNo, const G4VPhysicalVolume *physVol) const
G4ParameterisationConsZ(EAxis axis, G4int nCopies, G4double offset, G4double step, G4VSolid *motherSolid, DivisionType divType)
#define width
G4double CalculateWidth(G4double motherDim, G4int nDiv, G4double offset) const
void SetOuterRadiusPlusZ(G4double Rmax2)
G4ParameterisationConsPhi(EAxis axis, G4int nCopies, G4double offset, G4double step, G4VSolid *motherSolid, DivisionType divType)
G4double GetOuterRadiusMinusZ() const
virtual G4GeometryType GetEntityType() const =0
int G4int
Definition: G4Types.hh:78
void DumpInfo() const
G4GLOB_DLL std::ostream G4cout
void ChangeRotMatrix(G4VPhysicalVolume *physVol, G4double rotZ=0.) const
void ComputeTransformation(const G4int copyNo, G4VPhysicalVolume *physVol) const
static const double deg
Definition: G4SIunits.hh:133
void SetDeltaPhiAngle(G4double newDPhi)
Definition: G4Cons.hh:82
void SetTranslation(const G4ThreeVector &v)
void ComputeTransformation(const G4int copyNo, G4VPhysicalVolume *physVol) const
G4double GetStartPhiAngle() const
G4double GetInnerRadiusPlusZ() const
G4VParameterisationCons(EAxis axis, G4int nCopies, G4double offset, G4double step, G4VSolid *msolid, DivisionType divType)
void G4Exception(const char *originOfException, const char *exceptionCode, G4ExceptionSeverity severity, const char *comments)
Definition: G4Exception.cc:41
G4VSolid * GetMotherSolid() const
EAxis
Definition: geomdefs.hh:54
G4ParameterisationConsRho(EAxis axis, G4int nCopies, G4double offset, G4double step, G4VSolid *motherSolid, DivisionType divType)
G4int CalculateNDiv(G4double motherDim, G4double width, G4double offset) const
#define G4endl
Definition: G4ios.hh:61
void SetOuterRadiusMinusZ(G4double Rmax1)
void SetStartPhiAngle(G4double newSPhi, G4bool trig=true)
double G4double
Definition: G4Types.hh:76
G4double GetInnerRadiusMinusZ() const
void SetInnerRadiusPlusZ(G4double Rmin2)
G4double GetOuterRadiusPlusZ() const
void ComputeTransformation(const G4int copyNo, G4VPhysicalVolume *physVol) const
G4double GetZHalfLength() const
void ComputeDimensions(G4Cons &tubs, const G4int copyNo, const G4VPhysicalVolume *physVol) const
G4double GetDeltaPhiAngle() const