#include <G4Polycone.hh>

Inheritance diagram for G4Polycone:

Collaboration diagram for G4Polycone:

Public Member Functions
	G4Polycone (const G4String &name, G4double phiStart, G4double phiTotal, G4int numZPlanes, const G4double zPlane[], const G4double rInner[], const G4double rOuter[])

	G4Polycone (const G4String &name, G4double phiStart, G4double phiTotal, G4int numRZ, const G4double r[], const G4double z[])

virtual	~G4Polycone ()

EInside	Inside (const G4ThreeVector &p) const

G4double	DistanceToIn (const G4ThreeVector &p, const G4ThreeVector &v) const

G4double	DistanceToIn (const G4ThreeVector &p) const

void	Extent (G4ThreeVector &pMin, G4ThreeVector &pMax) const

G4bool	CalculateExtent (const EAxis pAxis, const G4VoxelLimits &pVoxelLimit, const G4AffineTransform &pTransform, G4double &pmin, G4double &pmax) const

G4ThreeVector	GetPointOnSurface () const

void	ComputeDimensions (G4VPVParameterisation p, const G4int n, const G4VPhysicalVolume pRep)

G4GeometryType	GetEntityType () const

G4VSolid *	Clone () const

std::ostream &	StreamInfo (std::ostream &os) const

G4Polyhedron *	CreatePolyhedron () const

G4bool	Reset ()

G4double	GetStartPhi () const

G4double	GetEndPhi () const

G4double	GetSinStartPhi () const

G4double	GetCosStartPhi () const

G4double	GetSinEndPhi () const

G4double	GetCosEndPhi () const

G4bool	IsOpen () const

G4int	GetNumRZCorner () const

G4PolyconeSideRZ	GetCorner (G4int index) const

G4PolyconeHistorical *	GetOriginalParameters () const

void	SetOriginalParameters (G4PolyconeHistorical *pars)

	G4Polycone (__void__ &)

	G4Polycone (const G4Polycone &source)

G4Polycone &	operator= (const G4Polycone &source)

Public Member Functions inherited from G4VCSGfaceted
	G4VCSGfaceted (const G4String &name)

virtual	~G4VCSGfaceted ()

	G4VCSGfaceted (const G4VCSGfaceted &source)

G4VCSGfaceted &	operator= (const G4VCSGfaceted &source)

virtual G4ThreeVector	SurfaceNormal (const G4ThreeVector &p) const

virtual G4double	DistanceToOut (const G4ThreeVector &p, const G4ThreeVector &v, const G4bool calcNorm=false, G4bool validNorm=0, G4ThreeVector n=0) const

virtual G4double	DistanceToOut (const G4ThreeVector &p) const

virtual void	DescribeYourselfTo (G4VGraphicsScene &scene) const

virtual G4VisExtent	GetExtent () const

virtual G4Polyhedron *	GetPolyhedron () const

G4int	GetCubVolStatistics () const

G4double	GetCubVolEpsilon () const

void	SetCubVolStatistics (G4int st)

void	SetCubVolEpsilon (G4double ep)

G4int	GetAreaStatistics () const

G4double	GetAreaAccuracy () const

void	SetAreaStatistics (G4int st)

void	SetAreaAccuracy (G4double ep)

virtual G4double	GetCubicVolume ()

virtual G4double	GetSurfaceArea ()

	G4VCSGfaceted (__void__ &)

Public Member Functions inherited from G4VSolid
	G4VSolid (const G4String &name)

virtual	~G4VSolid ()

G4bool	operator== (const G4VSolid &s) const

G4String	GetName () const

void	SetName (const G4String &name)

G4double	GetTolerance () const

void	DumpInfo () const

virtual const G4VSolid *	GetConstituentSolid (G4int no) const

virtual G4VSolid *	GetConstituentSolid (G4int no)

virtual const G4DisplacedSolid *	GetDisplacedSolidPtr () const

virtual G4DisplacedSolid *	GetDisplacedSolidPtr ()

	G4VSolid (__void__ &)

	G4VSolid (const G4VSolid &rhs)

G4VSolid &	operator= (const G4VSolid &rhs)

G4double	EstimateCubicVolume (G4int nStat, G4double epsilon) const

G4double	EstimateSurfaceArea (G4int nStat, G4double ell) const

Protected Member Functions
G4bool	SetOriginalParameters (G4ReduciblePolygon *rz)

void	Create (G4double phiStart, G4double phiTotal, G4ReduciblePolygon *rz)

void	CopyStuff (const G4Polycone &source)

G4ThreeVector	GetPointOnCone (G4double fRmin1, G4double fRmax1, G4double fRmin2, G4double fRmax2, G4double zOne, G4double zTwo, G4double &totArea) const

G4ThreeVector	GetPointOnTubs (G4double fRMin, G4double fRMax, G4double zOne, G4double zTwo, G4double &totArea) const

G4ThreeVector	GetPointOnCut (G4double fRMin1, G4double fRMax1, G4double fRMin2, G4double fRMax2, G4double zOne, G4double zTwo, G4double &totArea) const

G4ThreeVector	GetPointOnRing (G4double fRMin, G4double fRMax, G4double fRMin2, G4double fRMax2, G4double zOne) const

Protected Member Functions inherited from G4VCSGfaceted
virtual G4double	DistanceTo (const G4ThreeVector &p, const G4bool outgoing) const

G4ThreeVector	GetPointOnSurfaceGeneric () const

void	CopyStuff (const G4VCSGfaceted &source)

void	DeleteStuff ()

Protected Member Functions inherited from G4VSolid
void	CalculateClippedPolygonExtent (G4ThreeVectorList &pPolygon, const G4VoxelLimits &pVoxelLimit, const EAxis pAxis, G4double &pMin, G4double &pMax) const

void	ClipCrossSection (G4ThreeVectorList *pVertices, const G4int pSectionIndex, const G4VoxelLimits &pVoxelLimit, const EAxis pAxis, G4double &pMin, G4double &pMax) const

void	ClipBetweenSections (G4ThreeVectorList *pVertices, const G4int pSectionIndex, const G4VoxelLimits &pVoxelLimit, const EAxis pAxis, G4double &pMin, G4double &pMax) const

void	ClipPolygon (G4ThreeVectorList &pPolygon, const G4VoxelLimits &pVoxelLimit, const EAxis pAxis) const

Protected Attributes
G4double	startPhi

G4double	endPhi

G4bool	phiIsOpen

G4int	numCorner

G4PolyconeSideRZ *	corners

G4PolyconeHistorical *	original_parameters

G4EnclosingCylinder *	enclosingCylinder

Protected Attributes inherited from G4VCSGfaceted
G4int	numFace

G4VCSGface **	faces

G4double	fCubicVolume

G4double	fSurfaceArea

G4bool	fRebuildPolyhedron

G4Polyhedron *	fpPolyhedron

Protected Attributes inherited from G4VSolid
G4double	kCarTolerance

Detailed Description

Definition at line 82 of file G4Polycone.hh.

Constructor & Destructor Documentation

G4Polycone::G4Polycone	(	const G4String &	name,
		G4double	phiStart,
		G4double	phiTotal,
		G4int	numZPlanes,
		const G4double	zPlane[],
		const G4double	rInner[],
		const G4double	rOuter[]
	)

Definition at line 63 of file G4Polycone.cc.

   : G4VCSGfaceted( name )
 {
   //
   // Some historical ugliness
   //
   original_parameters = new G4PolyconeHistorical();
   
   original_parameters->Start_angle = phiStart;
   original_parameters->Opening_angle = phiTotal;
   original_parameters->Num_z_planes = numZPlanes;
   original_parameters->Z_values = new G4double[numZPlanes];
   original_parameters->Rmin = new G4double[numZPlanes];
   original_parameters->Rmax = new G4double[numZPlanes];
 
   G4int i;
   for (i=0; i<numZPlanes; i++)
   { 
     if(rInner[i]>rOuter[i])
     {
       DumpInfo();
       std::ostringstream message;
       message << "Cannot create a Polycone with rInner > rOuter for the same Z"
               << G4endl
               << "        rInner > rOuter for the same Z !" << G4endl
               << "        rMin[" << i << "] = " << rInner[i]
               << " -- rMax[" << i << "] = " << rOuter[i];
       G4Exception("G4Polycone::G4Polycone()", "GeomSolids0002",
                   FatalErrorInArgument, message);
     }
     if (( i < numZPlanes-1) && ( zPlane[i] == zPlane[i+1] ))
     {
       if( (rInner[i]   > rOuter[i+1])
         ||(rInner[i+1] > rOuter[i])   )
       {
         DumpInfo();
         std::ostringstream message;
         message << "Cannot create a Polycone with no contiguous segments."
                 << G4endl
                 << "        Segments are not contiguous !" << G4endl
                 << "        rMin[" << i << "] = " << rInner[i]
                 << " -- rMax[" << i+1 << "] = " << rOuter[i+1] << G4endl
                 << "        rMin[" << i+1 << "] = " << rInner[i+1]
                 << " -- rMax[" << i << "] = " << rOuter[i];
         G4Exception("G4Polycone::G4Polycone()", "GeomSolids0002",
                     FatalErrorInArgument, message);
       }
     } 
     original_parameters->Z_values[i] = zPlane[i];
     original_parameters->Rmin[i] = rInner[i];
     original_parameters->Rmax[i] = rOuter[i];
   }
 
   //
   // Build RZ polygon using special PCON/PGON GEANT3 constructor
   //
   G4ReduciblePolygon *rz =
     new G4ReduciblePolygon( rInner, rOuter, zPlane, numZPlanes );
   
   //
   // Do the real work
   //
   Create( phiStart, phiTotal, rz );
   
   delete rz;
 }

Here is the call graph for this function:

Here is the caller graph for this function:

G4Polycone::G4Polycone	(	const G4String &	name,
		G4double	phiStart,
		G4double	phiTotal,
		G4int	numRZ,
		const G4double	r[],
		const G4double	z[]
	)

Definition at line 140 of file G4Polycone.cc.

   : G4VCSGfaceted( name )
 { 
   
   G4ReduciblePolygon *rz = new G4ReduciblePolygon( r, z, numRZ );
   
   Create( phiStart, phiTotal, rz );
   
   // Set original_parameters struct for consistency
   //
   
   G4bool convertible=SetOriginalParameters(rz);
 
   if(!convertible)
   {
     std::ostringstream message;
     message << "Polycone " << GetName() << "cannot be converted" << G4endl
             << "to Polycone with (Rmin,Rmaz,Z) parameters!";
     G4Exception("G4Polycone::G4Polycone()", "GeomSolids0002",
                 FatalException, message, "Use G4GenericPolycone instead!");
   }
   else
   {
     G4cout << "INFO: Converting polycone " << GetName() << G4endl
            << "to optimized polycone with (Rmin,Rmaz,Z) parameters !"
            << G4endl;
   }
   delete rz;
 }

Here is the call graph for this function:

G4Polycone::~G4Polycone ( )

virtual

Definition at line 362 of file G4Polycone.cc.

 {
   delete [] corners;
   delete original_parameters;
   delete enclosingCylinder;
 }

G4Polycone::G4Polycone ( __void__ & a )

Definition at line 351 of file G4Polycone.cc.

   : G4VCSGfaceted(a), startPhi(0.),  endPhi(0.), phiIsOpen(false),
     numCorner(0), corners(0),original_parameters(0), 
     enclosingCylinder(0)
 {
 }

G4Polycone::G4Polycone ( const G4Polycone & source )

Definition at line 373 of file G4Polycone.cc.

   : G4VCSGfaceted( source )
 {
   CopyStuff( source );
 }

Here is the call graph for this function:

Member Function Documentation

G4bool G4Polycone::CalculateExtent	(	const EAxis	pAxis,
		const G4VoxelLimits &	pVoxelLimit,
		const G4AffineTransform &	pTransform,
		G4double &	pmin,
		G4double &	pmax
	)		const

virtual

Reimplemented from G4VCSGfaceted.

Definition at line 574 of file G4Polycone.cc.

 {
   G4ThreeVector bmin, bmax;
   G4bool exist;
 
   // Check bounding box (bbox)
   //
   Extent(bmin,bmax);
   G4BoundingEnvelope bbox(bmin,bmax);
 #ifdef G4BBOX_EXTENT
   if (true) return bbox.CalculateExtent(pAxis,pVoxelLimit,pTransform,pMin,pMax);
 #endif
   if (bbox.BoundingBoxVsVoxelLimits(pAxis,pVoxelLimit,pTransform,pMin,pMax))
   {
     return exist = (pMin < pMax) ? true : false;
   }
 
   // To find the extent, RZ contour of the polycone is subdivided
   // in triangles. The extent is calculated as cumulative extent of
   // all sub-polycones formed by rotation of triangles around Z
   //
   G4TwoVectorList contourRZ;
   G4TwoVectorList triangles;
   std::vector<G4int> iout;
   G4double eminlim = pVoxelLimit.GetMinExtent(pAxis);
   G4double emaxlim = pVoxelLimit.GetMaxExtent(pAxis);
 
   // get RZ contour, ensure anticlockwise order of corners
   for (G4int i=0; i<GetNumRZCorner(); ++i)
   {
     G4PolyconeSideRZ corner = GetCorner(i);
     contourRZ.push_back(G4TwoVector(corner.r,corner.z));
   }
   G4GeomTools::RemoveRedundantVertices(contourRZ,iout,2*kCarTolerance);
   G4double area = G4GeomTools::PolygonArea(contourRZ);
   if (area < 0.) std::reverse(contourRZ.begin(),contourRZ.end());
 
   // triangulate RZ countour
   if (!G4GeomTools::TriangulatePolygon(contourRZ,triangles))
   {
     std::ostringstream message;
     message << "Triangulation of RZ contour has failed for solid: "
             << GetName() << " !"
             << "\nExtent has been calculated using boundary box";
     G4Exception("G4Polycone::CalculateExtent()",
                 "GeomMgt1002", JustWarning, message);
     return bbox.CalculateExtent(pAxis,pVoxelLimit,pTransform,pMin,pMax);
   }
 
   // set trigonometric values
   const G4int NSTEPS = 24;            // number of steps for whole circle
   G4double astep  = twopi/NSTEPS;     // max angle for one step
 
   G4double sphi   = GetStartPhi();
   G4double ephi   = GetEndPhi();
   G4double dphi   = IsOpen() ? ephi-sphi : twopi;
   G4int    ksteps = (dphi <= astep) ? 1 : (G4int)((dphi-deg)/astep) + 1;
   G4double ang    = dphi/ksteps;
 
   G4double sinHalf = std::sin(0.5*ang);
   G4double cosHalf = std::cos(0.5*ang);
   G4double sinStep = 2.*sinHalf*cosHalf;
   G4double cosStep = 1. - 2.*sinHalf*sinHalf;
 
   G4double sinStart = GetSinStartPhi();
   G4double cosStart = GetCosStartPhi();
   G4double sinEnd   = GetSinEndPhi();
   G4double cosEnd   = GetCosEndPhi();
 
   // define vectors and arrays
   std::vector<const G4ThreeVectorList *> polygons;
   polygons.resize(ksteps+2);
   G4ThreeVectorList pols[NSTEPS+2];
   for (G4int k=0; k<ksteps+2; ++k) pols[k].resize(6);
   for (G4int k=0; k<ksteps+2; ++k) polygons[k] = &pols[k];
   G4double r0[6],z0[6]; // contour with original edges of triangle
   G4double r1[6];       // shifted radii of external edges of triangle
 
   // main loop along triangles
   pMin = kInfinity;
   pMax =-kInfinity;
   G4int ntria = triangles.size()/3;
   for (G4int i=0; i<ntria; ++i)
   {
     G4int i3 = i*3;
     for (G4int k=0; k<3; ++k)
     {
       G4int e0 = i3+k, e1 = (k<2) ? e0+1 : i3;
       G4int k2 = k*2;
       // set contour with original edges of triangle
       r0[k2+0] = triangles[e0].x(); z0[k2+0] = triangles[e0].y();
       r0[k2+1] = triangles[e1].x(); z0[k2+1] = triangles[e1].y();
       // set shifted radii
       r1[k2+0] = r0[k2+0];
       r1[k2+1] = r0[k2+1];
       if (z0[k2+1] - z0[k2+0] <= 0) continue;
       r1[k2+0] /= cosHalf;
       r1[k2+1] /= cosHalf;
     }
 
     // rotate countour, set sequence of 6-sided polygons
     G4double sinCur = sinStart*cosHalf + cosStart*sinHalf;
     G4double cosCur = cosStart*cosHalf - sinStart*sinHalf;
     for (G4int j=0; j<6; ++j) pols[0][j].set(r0[j]*cosStart,r0[j]*sinStart,z0[j]);
     for (G4int k=1; k<ksteps+1; ++k)
     {
       for (G4int j=0; j<6; ++j) pols[k][j].set(r1[j]*cosCur,r1[j]*sinCur,z0[j]);
       G4double sinTmp = sinCur;
       sinCur = sinCur*cosStep + cosCur*sinStep;
       cosCur = cosCur*cosStep - sinTmp*sinStep;
     }
     for (G4int j=0; j<6; ++j) pols[ksteps+1][j].set(r0[j]*cosEnd,r0[j]*sinEnd,z0[j]);
 
     // set sub-envelope and adjust extent
     G4double emin,emax;
     G4BoundingEnvelope benv(polygons);
     if (!benv.CalculateExtent(pAxis,pVoxelLimit,pTransform,emin,emax)) continue;
     if (emin < pMin) pMin = emin;
     if (emax > pMax) pMax = emax;
     if (eminlim > pMin && emaxlim < pMax) return true; // max possible extent
   }
   return (pMin < pMax);
 }

Here is the call graph for this function:

G4VSolid * G4Polycone::Clone ( ) const

virtual

Reimplemented from G4VSolid.

Definition at line 722 of file G4Polycone.cc.

 {
   return new G4Polycone(*this);
 }

Here is the call graph for this function:

void G4Polycone::ComputeDimensions	(	G4VPVParameterisation *	p,
		const G4int	n,
		const G4VPhysicalVolume *	pRep
	)

virtual

Reimplemented from G4VSolid.

Definition at line 704 of file G4Polycone.cc.

 {
   p->ComputeDimensions(*this,n,pRep);
 }

Here is the call graph for this function:

void G4Polycone::CopyStuff ( const G4Polycone & source )

protected

Definition at line 403 of file G4Polycone.cc.

 {
   //
   // Simple stuff
   //
   startPhi  = source.startPhi;
   endPhi    = source.endPhi;
   phiIsOpen  = source.phiIsOpen;
   numCorner  = source.numCorner;
 
   //
   // The corner array
   //
   corners = new G4PolyconeSideRZ[numCorner];
   
   G4PolyconeSideRZ  *corn = corners,
         *sourceCorn = source.corners;
   do    // Loop checking, 13.08.2015, G.Cosmo
   {
     *corn = *sourceCorn;
   } while( ++sourceCorn, ++corn < corners+numCorner );
   
   //
   // Original parameters
   //
   if (source.original_parameters)
   {
     original_parameters =
       new G4PolyconeHistorical( *source.original_parameters );
   }
   
   //
   // Enclosing cylinder
   //
   enclosingCylinder = new G4EnclosingCylinder( *source.enclosingCylinder );
 
   fRebuildPolyhedron = false;
   fpPolyhedron = 0;
 }

Here is the caller graph for this function:

void G4Polycone::Create	(	G4double	phiStart,
		G4double	phiTotal,
		G4ReduciblePolygon *	rz
	)

protected

Definition at line 181 of file G4Polycone.cc.

 {
   //
   // Perform checks of rz values
   //
   if (rz->Amin() < 0.0)
   {
     std::ostringstream message;
     message << "Illegal input parameters - " << GetName() << G4endl
             << "        All R values must be >= 0 !";
     G4Exception("G4Polycone::Create()", "GeomSolids0002",
                 FatalErrorInArgument, message);
   }
     
   G4double rzArea = rz->Area();
   if (rzArea < -kCarTolerance)
   {
     rz->ReverseOrder();
   }
   else if (rzArea < kCarTolerance)
   {
     std::ostringstream message;
     message << "Illegal input parameters - " << GetName() << G4endl
             << "        R/Z cross section is zero or near zero: " << rzArea;
     G4Exception("G4Polycone::Create()", "GeomSolids0002",
                 FatalErrorInArgument, message);
   }
     
   if ( (!rz->RemoveDuplicateVertices( kCarTolerance ))
     || (!rz->RemoveRedundantVertices( kCarTolerance ))     ) 
   {
     std::ostringstream message;
     message << "Illegal input parameters - " << GetName() << G4endl
             << "        Too few unique R/Z values !";
     G4Exception("G4Polycone::Create()", "GeomSolids0002",
                 FatalErrorInArgument, message);
   }
 
   if (rz->CrossesItself(1/kInfinity)) 
   {
     std::ostringstream message;
     message << "Illegal input parameters - " << GetName() << G4endl
             << "        R/Z segments cross !";
     G4Exception("G4Polycone::Create()", "GeomSolids0002",
                 FatalErrorInArgument, message);
   }
 
   numCorner = rz->NumVertices();
 
   //
   // Phi opening? Account for some possible roundoff, and interpret
   // nonsense value as representing no phi opening
   //
   if (phiTotal <= 0 || phiTotal > twopi-1E-10)
   {
     phiIsOpen = false;
     startPhi = 0;
     endPhi = twopi;
   }
   else
   {
     phiIsOpen = true;
     
     //
     // Convert phi into our convention
     //
     startPhi = phiStart;
     while( startPhi < 0 )    // Loop checking, 13.08.2015, G.Cosmo
       startPhi += twopi;
     
     endPhi = phiStart+phiTotal;
     while( endPhi < startPhi )    // Loop checking, 13.08.2015, G.Cosmo
       endPhi += twopi;
   }
   
   //
   // Allocate corner array. 
   //
   corners = new G4PolyconeSideRZ[numCorner];
 
   //
   // Copy corners
   //
   G4ReduciblePolygonIterator iterRZ(rz);
   
   G4PolyconeSideRZ *next = corners;
   iterRZ.Begin();
   do    // Loop checking, 13.08.2015, G.Cosmo
   {
     next->r = iterRZ.GetA();
     next->z = iterRZ.GetB();
   } while( ++next, iterRZ.Next() );
   
   //
   // Allocate face pointer array
   //
   numFace = phiIsOpen ? numCorner+2 : numCorner;
   faces = new G4VCSGface*[numFace];
   
   //
   // Construct conical faces
   //
   // But! Don't construct a face if both points are at zero radius!
   //
   G4PolyconeSideRZ *corner = corners,
                    *prev = corners + numCorner-1,
                    *nextNext;
   G4VCSGface  **face = faces;
   do    // Loop checking, 13.08.2015, G.Cosmo
   {
     next = corner+1;
     if (next >= corners+numCorner) next = corners;
     nextNext = next+1;
     if (nextNext >= corners+numCorner) nextNext = corners;
     
     if (corner->r < 1/kInfinity && next->r < 1/kInfinity) continue;
     
     //
     // We must decide here if we can dare declare one of our faces
     // as having a "valid" normal (i.e. allBehind = true). This
     // is never possible if the face faces "inward" in r.
     //
     G4bool allBehind;
     if (corner->z > next->z)
     {
       allBehind = false;
     }
     else
     {
       //
       // Otherwise, it is only true if the line passing
       // through the two points of the segment do not
       // split the r/z cross section
       //
       allBehind = !rz->BisectedBy( corner->r, corner->z,
                  next->r, next->z, kCarTolerance );
     }
     
     *face++ = new G4PolyconeSide( prev, corner, next, nextNext,
                 startPhi, endPhi-startPhi, phiIsOpen, allBehind );
   } while( prev=corner, corner=next, corner > corners );
   
   if (phiIsOpen)
   {
     //
     // Construct phi open edges
     //
     *face++ = new G4PolyPhiFace( rz, startPhi, 0, endPhi  );
     *face++ = new G4PolyPhiFace( rz, endPhi,   0, startPhi );
   }
   
   //
   // We might have dropped a face or two: recalculate numFace
   //
   numFace = face-faces;
   
   //
   // Make enclosingCylinder
   //
   enclosingCylinder =
     new G4EnclosingCylinder( rz, phiIsOpen, phiStart, phiTotal );
 }

Here is the call graph for this function:

Here is the caller graph for this function:

G4Polyhedron * G4Polycone::CreatePolyhedron ( ) const

virtual

Implements G4VCSGfaceted.

Definition at line 1086 of file G4Polycone.cc.

 { 
   //
   // This has to be fixed in visualization. Fake it for the moment.
   // 
   
     return new G4PolyhedronPcon( original_parameters->Start_angle,
                                  original_parameters->Opening_angle,
                                  original_parameters->Num_z_planes,
                                  original_parameters->Z_values,
                                  original_parameters->Rmin,
                                  original_parameters->Rmax );
 }

G4double G4Polycone::DistanceToIn	(	const G4ThreeVector &	p,
		const G4ThreeVector &	v
	)		const

virtual

Reimplemented from G4VCSGfaceted.

Definition at line 498 of file G4Polycone.cc.

 {
   //
   // Quick test
   //
   if (enclosingCylinder->ShouldMiss(p,v))
     return kInfinity;
   
   //
   // Long answer
   //
   return G4VCSGfaceted::DistanceToIn( p, v );
 }

Here is the call graph for this function:

G4double G4Polycone::DistanceToIn ( const G4ThreeVector & p ) const

virtual

Reimplemented from G4VCSGfaceted.

Definition at line 517 of file G4Polycone.cc.

 {
   return G4VCSGfaceted::DistanceToIn(p);
 }

Here is the call graph for this function:

void G4Polycone::Extent	(	G4ThreeVector &	pMin,
		G4ThreeVector &	pMax
	)		const

virtual

Reimplemented from G4VSolid.

Definition at line 526 of file G4Polycone.cc.

 {
   G4double rmin = kInfinity, rmax = -kInfinity;
   G4double zmin = kInfinity, zmax = -kInfinity;
 
   for (G4int i=0; i<GetNumRZCorner(); ++i)
   {
     G4PolyconeSideRZ corner = GetCorner(i);
     if (corner.r < rmin) rmin = corner.r;
     if (corner.r > rmax) rmax = corner.r;
     if (corner.z < zmin) zmin = corner.z;
     if (corner.z > zmax) zmax = corner.z;
   }
 
   if (IsOpen())
   {
     G4TwoVector vmin,vmax;
     G4GeomTools::DiskExtent(rmin,rmax,
                             GetSinStartPhi(),GetCosStartPhi(),
                             GetSinEndPhi(),GetCosEndPhi(),
                             vmin,vmax);
     pMin.set(vmin.x(),vmin.y(),zmin);
     pMax.set(vmax.x(),vmax.y(),zmax);
   }
   else
   {
     pMin.set(-rmax,-rmax, zmin);
     pMax.set( rmax, rmax, zmax);
   }
 
   // Check correctness of the bounding box
   //
   if (pMin.x() >= pMax.x() || pMin.y() >= pMax.y() || pMin.z() >= pMax.z())
   {
     std::ostringstream message;
     message << "Bad bounding box (min >= max) for solid: "
             << GetName() << " !"
             << "\npMin = " << pMin
             << "\npMax = " << pMax;
     G4Exception("G4Polycone::Extent()", "GeomMgt0001", JustWarning, message);
     DumpInfo();
   }
 }

Here is the call graph for this function:

Here is the caller graph for this function:

G4PolyconeSideRZ G4Polycone::GetCorner ( G4int index ) const

inline

Here is the caller graph for this function:

G4double G4Polycone::GetCosEndPhi ( ) const

inline

Here is the caller graph for this function:

G4double G4Polycone::GetCosStartPhi ( ) const

inline

Here is the caller graph for this function:

G4double G4Polycone::GetEndPhi ( ) const

inline

Here is the caller graph for this function:

G4GeometryType G4Polycone::GetEntityType ( ) const

virtual

Reimplemented from G4VCSGfaceted.

Definition at line 714 of file G4Polycone.cc.

 {
   return G4String("G4Polycone");
 }

G4int G4Polycone::GetNumRZCorner ( ) const

inline

Here is the caller graph for this function:

G4PolyconeHistorical* G4Polycone::GetOriginalParameters ( ) const

inline

Here is the caller graph for this function:

G4ThreeVector G4Polycone::GetPointOnCone	(	G4double	fRmin1,
		G4double	fRmax1,
		G4double	fRmin2,
		G4double	fRmax2,
		G4double	zOne,
		G4double	zTwo,
		G4double &	totArea
	)		const

protected

Definition at line 782 of file G4Polycone.cc.

 { 
   // declare working variables
   //
   G4double Aone, Atwo, Afive, phi, zRand, fDPhi, cosu, sinu;
   G4double rRand1, rmin, rmax, chose, rone, rtwo, qone, qtwo;
   G4double fDz=(zTwo-zOne)/2., afDz=std::fabs(fDz);
   G4ThreeVector point, offset=G4ThreeVector(0.,0.,0.5*(zTwo+zOne));
   fDPhi = endPhi - startPhi;
   rone = (fRmax1-fRmax2)/(2.*fDz); 
   rtwo = (fRmin1-fRmin2)/(2.*fDz);
   if(fRmax1==fRmax2){qone=0.;}
   else
   {
     qone = fDz*(fRmax1+fRmax2)/(fRmax1-fRmax2);
   }
   if(fRmin1==fRmin2){qtwo=0.;}
   else
   {
     qtwo = fDz*(fRmin1+fRmin2)/(fRmin1-fRmin2);
   }
   Aone   = 0.5*fDPhi*(fRmax2 + fRmax1)*(sqr(fRmin1-fRmin2)+sqr(zTwo-zOne));       
   Atwo   = 0.5*fDPhi*(fRmin2 + fRmin1)*(sqr(fRmax1-fRmax2)+sqr(zTwo-zOne));
   Afive  = fDz*(fRmax1-fRmin1+fRmax2-fRmin2);
   totArea = Aone+Atwo+2.*Afive;
   
   phi  = G4RandFlat::shoot(startPhi,endPhi);
   cosu = std::cos(phi);
   sinu = std::sin(phi);
 
 
   if( (startPhi == 0) && (endPhi == twopi) ) { Afive = 0; }
   chose = G4RandFlat::shoot(0.,Aone+Atwo+2.*Afive);
   if( (chose >= 0) && (chose < Aone) )
   {
     if(fRmax1 != fRmax2)
     {
       zRand = G4RandFlat::shoot(-1.*afDz,afDz); 
       point = G4ThreeVector (rone*cosu*(qone-zRand),
                              rone*sinu*(qone-zRand), zRand);
     }
     else
     {
       point = G4ThreeVector(fRmax1*cosu, fRmax1*sinu,
                             G4RandFlat::shoot(-1.*afDz,afDz));
      
     }
   }
   else if(chose >= Aone && chose < Aone + Atwo)
   {
     if(fRmin1 != fRmin2)
     { 
       zRand = G4RandFlat::shoot(-1.*afDz,afDz); 
       point = G4ThreeVector (rtwo*cosu*(qtwo-zRand),
                              rtwo*sinu*(qtwo-zRand), zRand);
       
     }
     else
     {
       point = G4ThreeVector(fRmin1*cosu, fRmin1*sinu,
                             G4RandFlat::shoot(-1.*afDz,afDz));
     }
   }
   else if( (chose >= Aone + Atwo + Afive) && (chose < Aone + Atwo + 2.*Afive) )
   {
     zRand  = G4RandFlat::shoot(-1.*afDz,afDz);
     rmin   = fRmin2-((zRand-fDz)/(2.*fDz))*(fRmin1-fRmin2);
     rmax   = fRmax2-((zRand-fDz)/(2.*fDz))*(fRmax1-fRmax2);
     rRand1 = std::sqrt(G4RandFlat::shoot()*(sqr(rmax)-sqr(rmin))+sqr(rmin));
     point  = G4ThreeVector (rRand1*std::cos(startPhi),
                             rRand1*std::sin(startPhi), zRand);
   }
   else
   { 
     zRand  = G4RandFlat::shoot(-1.*afDz,afDz); 
     rmin   = fRmin2-((zRand-fDz)/(2.*fDz))*(fRmin1-fRmin2);
     rmax   = fRmax2-((zRand-fDz)/(2.*fDz))*(fRmax1-fRmax2);
     rRand1 = std::sqrt(G4RandFlat::shoot()*(sqr(rmax)-sqr(rmin))+sqr(rmin));
     point  = G4ThreeVector (rRand1*std::cos(endPhi),
                             rRand1*std::sin(endPhi), zRand);
    
   }
   
   return point+offset;
 }

Here is the call graph for this function:

Here is the caller graph for this function:

G4ThreeVector G4Polycone::GetPointOnCut	(	G4double	fRMin1,
		G4double	fRMax1,
		G4double	fRMin2,
		G4double	fRMax2,
		G4double	zOne,
		G4double	zTwo,
		G4double &	totArea
	)		const

protected

Definition at line 979 of file G4Polycone.cc.

 {   if(zOne==zTwo)
     {
       return GetPointOnRing(fRMin1, fRMax1,fRMin2,fRMax2,zOne);
     }
     if( (fRMin1 == fRMin2) && (fRMax1 == fRMax2) )
     {
       return GetPointOnTubs(fRMin1, fRMax1,zOne,zTwo,totArea);
     }
     return GetPointOnCone(fRMin1,fRMax1,fRMin2,fRMax2,zOne,zTwo,totArea);
 }

Here is the call graph for this function:

Here is the caller graph for this function:

G4ThreeVector G4Polycone::GetPointOnRing	(	G4double	fRMin,
		G4double	fRMax,
		G4double	fRMin2,
		G4double	fRMax2,
		G4double	zOne
	)		const

protected

Definition at line 936 of file G4Polycone.cc.

 {
   G4double xRand,yRand,phi,cosphi,sinphi,rRand1,rRand2,A1,Atot,rCh;
   phi    = G4RandFlat::shoot(startPhi,endPhi);
   cosphi = std::cos(phi);
   sinphi = std::sin(phi);
 
   if(fRMin1==fRMin2)
   {
     rRand1 = fRMin1; A1=0.;
   }
   else
   {
     rRand1 = G4RandFlat::shoot(fRMin1,fRMin2);
     A1=std::fabs(fRMin2*fRMin2-fRMin1*fRMin1);
   }
   if(fRMax1==fRMax2)
   {
     rRand2=fRMax1; Atot=A1;
   }
   else
   {
     rRand2 = G4RandFlat::shoot(fRMax1,fRMax2);
     Atot   = A1+std::fabs(fRMax2*fRMax2-fRMax1*fRMax1);
   }
   rCh   = G4RandFlat::shoot(0.,Atot);
  
   if(rCh>A1) { rRand1=rRand2; }
   
   xRand = rRand1*cosphi;
   yRand = rRand1*sinphi;
 
   return G4ThreeVector(xRand, yRand, zOne);
 }

Here is the call graph for this function:

Here is the caller graph for this function:

G4ThreeVector G4Polycone::GetPointOnSurface ( ) const

virtual

Reimplemented from G4VSolid.

Definition at line 998 of file G4Polycone.cc.

 {
     G4double Area=0,totArea=0,Achose1=0,Achose2=0,phi,cosphi,sinphi,rRand;
     G4int i=0;
     G4int numPlanes = original_parameters->Num_z_planes;
   
     phi = G4RandFlat::shoot(startPhi,endPhi);
     cosphi = std::cos(phi);
     sinphi = std::sin(phi);
 
     rRand = original_parameters->Rmin[0] +
       ( (original_parameters->Rmax[0]-original_parameters->Rmin[0])
         * std::sqrt(G4RandFlat::shoot()) );
 
     std::vector<G4double> areas;       // (numPlanes+1);
     std::vector<G4ThreeVector> points; // (numPlanes-1);
   
     areas.push_back(pi*(sqr(original_parameters->Rmax[0])
                        -sqr(original_parameters->Rmin[0])));
 
     for(i=0; i<numPlanes-1; i++)
     {
       Area = (original_parameters->Rmin[i]+original_parameters->Rmin[i+1])
            * std::sqrt(sqr(original_parameters->Rmin[i]
                       -original_parameters->Rmin[i+1])+
                        sqr(original_parameters->Z_values[i+1]
                       -original_parameters->Z_values[i]));
 
       Area += (original_parameters->Rmax[i]+original_parameters->Rmax[i+1])
             * std::sqrt(sqr(original_parameters->Rmax[i]
                        -original_parameters->Rmax[i+1])+
                         sqr(original_parameters->Z_values[i+1]
                        -original_parameters->Z_values[i]));
 
       Area *= 0.5*(endPhi-startPhi);
     
       if(startPhi==0.&& endPhi == twopi)
       {
         Area += std::fabs(original_parameters->Z_values[i+1]
                          -original_parameters->Z_values[i])*
                          (original_parameters->Rmax[i]
                          +original_parameters->Rmax[i+1]
                          -original_parameters->Rmin[i]
                          -original_parameters->Rmin[i+1]);
       }
       areas.push_back(Area);
       totArea += Area;
     }
   
     areas.push_back(pi*(sqr(original_parameters->Rmax[numPlanes-1])-
                         sqr(original_parameters->Rmin[numPlanes-1])));
   
     totArea += (areas[0]+areas[numPlanes]);
     G4double chose = G4RandFlat::shoot(0.,totArea);
 
     if( (chose>=0.) && (chose<areas[0]) )
     {
       return G4ThreeVector(rRand*cosphi, rRand*sinphi,
                            original_parameters->Z_values[0]);
     }
   
     for (i=0; i<numPlanes-1; i++)
     {
       Achose1 += areas[i];
       Achose2 = (Achose1+areas[i+1]);
       if(chose>=Achose1 && chose<Achose2)
       {
         return GetPointOnCut(original_parameters->Rmin[i],
                              original_parameters->Rmax[i],
                              original_parameters->Rmin[i+1],
                              original_parameters->Rmax[i+1],
                              original_parameters->Z_values[i],
                              original_parameters->Z_values[i+1], Area);
       }
     }
 
     rRand = original_parameters->Rmin[numPlanes-1] +
       ( (original_parameters->Rmax[numPlanes-1]-original_parameters->Rmin[numPlanes-1])
         * std::sqrt(G4RandFlat::shoot()) );
 
     return G4ThreeVector(rRand*cosphi,rRand*sinphi,
                          original_parameters->Z_values[numPlanes-1]);  
  
 }

Here is the call graph for this function:

G4ThreeVector G4Polycone::GetPointOnTubs	(	G4double	fRMin,
		G4double	fRMax,
		G4double	zOne,
		G4double	zTwo,
		G4double &	totArea
	)		const

protected

Definition at line 877 of file G4Polycone.cc.

 { 
   G4double xRand,yRand,zRand,phi,cosphi,sinphi,chose,
            aOne,aTwo,aFou,rRand,fDz,fSPhi,fDPhi;
   fDz = std::fabs(0.5*(zTwo-zOne));
   fSPhi = startPhi;
   fDPhi = endPhi-startPhi;
   
   aOne = 2.*fDz*fDPhi*fRMax;
   aTwo = 2.*fDz*fDPhi*fRMin;
   aFou = 2.*fDz*(fRMax-fRMin);
   totArea = aOne+aTwo+2.*aFou;
   phi    = G4RandFlat::shoot(startPhi,endPhi);
   cosphi = std::cos(phi);
   sinphi = std::sin(phi);
   rRand  = fRMin + (fRMax-fRMin)*std::sqrt(G4RandFlat::shoot());
  
   if(startPhi == 0 && endPhi == twopi) 
     aFou = 0;
   
   chose  = G4RandFlat::shoot(0.,aOne+aTwo+2.*aFou);
   if( (chose >= 0) && (chose < aOne) )
   {
     xRand = fRMax*cosphi;
     yRand = fRMax*sinphi;
     zRand = G4RandFlat::shoot(-1.*fDz,fDz);
     return G4ThreeVector(xRand, yRand, zRand+0.5*(zTwo+zOne));
   }
   else if( (chose >= aOne) && (chose < aOne + aTwo) )
   {
     xRand = fRMin*cosphi;
     yRand = fRMin*sinphi;
     zRand = G4RandFlat::shoot(-1.*fDz,fDz);
     return G4ThreeVector(xRand, yRand, zRand+0.5*(zTwo+zOne));
   }
   else if( (chose >= aOne+aTwo) && (chose <aOne+aTwo+aFou) )
   {
     xRand = rRand*std::cos(fSPhi+fDPhi);
     yRand = rRand*std::sin(fSPhi+fDPhi);
     zRand = G4RandFlat::shoot(-1.*fDz,fDz);
     return G4ThreeVector(xRand, yRand, zRand+0.5*(zTwo+zOne));
   }
 
   // else
 
   xRand = rRand*std::cos(fSPhi+fDPhi);
   yRand = rRand*std::sin(fSPhi+fDPhi);
   zRand = G4RandFlat::shoot(-1.*fDz,fDz);
   return G4ThreeVector(xRand, yRand, zRand+0.5*(zTwo+zOne));
 }

Here is the call graph for this function:

Here is the caller graph for this function:

G4double G4Polycone::GetSinEndPhi ( ) const

inline

Here is the caller graph for this function:

G4double G4Polycone::GetSinStartPhi ( ) const

inline

Here is the caller graph for this function:

G4double G4Polycone::GetStartPhi ( ) const

inline

Here is the caller graph for this function:

EInside G4Polycone::Inside ( const G4ThreeVector & p ) const

virtual

Reimplemented from G4VCSGfaceted.

Definition at line 478 of file G4Polycone.cc.

 {
   //
   // Quick test
   //
   if (enclosingCylinder->MustBeOutside(p)) return kOutside;
 
   //
   // Long answer
   //
   return G4VCSGfaceted::Inside(p);
 }

Here is the call graph for this function:

G4bool G4Polycone::IsOpen ( ) const

inline

Here is the caller graph for this function:

G4Polycone & G4Polycone::operator= ( const G4Polycone & source )

Definition at line 383 of file G4Polycone.cc.

 {
   if (this == &source) return *this;
   
   G4VCSGfaceted::operator=( source );
   
   delete [] corners;
   if (original_parameters) delete original_parameters;
   
   delete enclosingCylinder;
   
   CopyStuff( source );
   
   return *this;
 }

Here is the call graph for this function:

G4bool G4Polycone::Reset ( )

Definition at line 447 of file G4Polycone.cc.

 {
   //
   // Clear old setup
   //
   G4VCSGfaceted::DeleteStuff();
   delete [] corners;
   delete enclosingCylinder;
 
   //
   // Rebuild polycone
   //
   G4ReduciblePolygon *rz =
     new G4ReduciblePolygon( original_parameters->Rmin,
                             original_parameters->Rmax,
                             original_parameters->Z_values,
                             original_parameters->Num_z_planes );
   Create( original_parameters->Start_angle,
           original_parameters->Opening_angle, rz );
   delete rz;
 
   return 0;
 }

Here is the call graph for this function:

Here is the caller graph for this function:

void G4Polycone::SetOriginalParameters ( G4PolyconeHistorical * pars )

inline

Here is the caller graph for this function:

G4bool G4Polycone::SetOriginalParameters ( G4ReduciblePolygon * rz )

protected

Definition at line 1100 of file G4Polycone.cc.

 {
   G4int numPlanes = (G4int)numCorner;  
   G4bool isConvertible=true;
   G4double Zmax=rz->Bmax();
   rz->StartWithZMin();
 
   // Prepare vectors for storage 
   //
   std::vector<G4double> Z;
   std::vector<G4double> Rmin;
   std::vector<G4double> Rmax;
 
   G4int countPlanes=1;
   G4int icurr=0;
   G4int icurl=0;
 
   // first plane Z=Z[0]
   //
   Z.push_back(corners[0].z);
   G4double Zprev=Z[0];
   if (Zprev == corners[1].z)
   {
     Rmin.push_back(corners[0].r);  
     Rmax.push_back (corners[1].r);icurr=1; 
   }
   else if (Zprev == corners[numPlanes-1].z)
   {
     Rmin.push_back(corners[numPlanes-1].r);  
     Rmax.push_back (corners[0].r);
     icurl=numPlanes-1;  
   }
   else
   {
     Rmin.push_back(corners[0].r);  
     Rmax.push_back (corners[0].r);
   }
 
   // next planes until last
   //
   G4int inextr=0, inextl=0; 
   for (G4int i=0; i < numPlanes-2; i++)
   {
     inextr=1+icurr;
     inextl=(icurl <= 0)? numPlanes-1 : icurl-1;
 
     if((corners[inextr].z >= Zmax) & (corners[inextl].z >= Zmax))  { break; }
 
     G4double Zleft = corners[inextl].z;
     G4double Zright = corners[inextr].z;
     if(Zright > Zleft)  // Next plane will be Zleft
     {
       Z.push_back(Zleft);  
       countPlanes++;
       G4double difZr=corners[inextr].z - corners[icurr].z;
       G4double difZl=corners[inextl].z - corners[icurl].z;
 
       if(std::fabs(difZl) < kCarTolerance)
       {
         if(std::fabs(difZr) < kCarTolerance)
         {
           Rmin.push_back(corners[inextl].r);
           Rmax.push_back(corners[icurr].r);
         }
         else
         {
           Rmin.push_back(corners[inextl].r);
           Rmax.push_back(corners[icurr].r + (Zleft-corners[icurr].z)/difZr
                                 *(corners[inextr].r - corners[icurr].r)); 
         }
       }
       else if (difZl >= kCarTolerance)
       {
         if(std::fabs(difZr) < kCarTolerance)
         {
           Rmin.push_back(corners[icurl].r);
           Rmax.push_back(corners[icurr].r);
         }
         else
         {
           Rmin.push_back(corners[icurl].r);
           Rmax.push_back(corners[icurr].r + (Zleft-corners[icurr].z)/difZr
                                 *(corners[inextr].r - corners[icurr].r));
         }
       }
       else
       {
         isConvertible=false; break;
       }
       icurl=(icurl == 0)? numPlanes-1 : icurl-1;
     }
     else if(std::fabs(Zright-Zleft)<kCarTolerance)  // Zright=Zleft
     {
       Z.push_back(Zleft);  
       countPlanes++;
       icurr++;
 
       icurl=(icurl == 0)? numPlanes-1 : icurl-1;
 
       Rmin.push_back(corners[inextl].r);  
       Rmax.push_back(corners[inextr].r);
     }
     else  // Zright<Zleft
     {
       Z.push_back(Zright);  
       countPlanes++;
 
       G4double difZr=corners[inextr].z - corners[icurr].z;
       G4double difZl=corners[inextl].z - corners[icurl].z;
       if(std::fabs(difZr) < kCarTolerance)
       {
         if(std::fabs(difZl) < kCarTolerance)
         {
           Rmax.push_back(corners[inextr].r);
           Rmin.push_back(corners[icurr].r); 
         } 
         else
         {
           Rmin.push_back(corners[icurl].r + (Zright-corners[icurl].z)/difZl
                                 *(corners[inextl].r - corners[icurl].r));
           Rmax.push_back(corners[inextr].r);
         }
         icurr++;
       }           // plate
       else if (difZr >= kCarTolerance)
       {
         if(std::fabs(difZl) < kCarTolerance)
         {
           Rmax.push_back(corners[inextr].r);
           Rmin.push_back (corners[icurr].r); 
         } 
         else
         {
           Rmax.push_back(corners[inextr].r);
           Rmin.push_back (corners[icurl].r+(Zright-corners[icurl].z)/difZl
                                   * (corners[inextl].r - corners[icurl].r));
         }
         icurr++;
       }
       else
       {
         isConvertible=false; break;
       }
     }
   }   // end for loop
 
   // last plane Z=Zmax
   //
   Z.push_back(Zmax);
   countPlanes++;
   inextr=1+icurr;
   inextl=(icurl <= 0)? numPlanes-1 : icurl-1;
  
   Rmax.push_back(corners[inextr].r);
   Rmin.push_back(corners[inextl].r);
 
   // Set original parameters Rmin,Rmax,Z
   //
   if(isConvertible)
   {
    original_parameters = new G4PolyconeHistorical;
    original_parameters->Z_values = new G4double[countPlanes];
    original_parameters->Rmin = new G4double[countPlanes];
    original_parameters->Rmax = new G4double[countPlanes];
   
    for(G4int j=0; j < countPlanes; j++)
    {
      original_parameters->Z_values[j] = Z[j];
      original_parameters->Rmax[j] = Rmax[j];
      original_parameters->Rmin[j] = Rmin[j];
    }
    original_parameters->Start_angle = startPhi;
    original_parameters->Opening_angle = endPhi-startPhi;
    original_parameters->Num_z_planes = countPlanes;
  
   }
   else  // Set parameters(r,z) with Rmin==0 as convention
   {
 #ifdef G4SPECSDEBUG
     std::ostringstream message;
     message << "Polycone " << GetName() << G4endl
             << "cannot be converted to Polycone with (Rmin,Rmaz,Z) parameters!";
     G4Exception("G4Polycone::SetOriginalParameters()", "GeomSolids0002",
                 JustWarning, message);
 #endif
     original_parameters = new G4PolyconeHistorical;
     original_parameters->Z_values = new G4double[numPlanes];
     original_parameters->Rmin = new G4double[numPlanes];
     original_parameters->Rmax = new G4double[numPlanes];
   
     for(G4int j=0; j < numPlanes; j++)
     {
       original_parameters->Z_values[j] = corners[j].z;
       original_parameters->Rmax[j] = corners[j].r;
       original_parameters->Rmin[j] = 0.0;
     }
     original_parameters->Start_angle = startPhi;
     original_parameters->Opening_angle = endPhi-startPhi;
     original_parameters->Num_z_planes = numPlanes;
   }
   return isConvertible;
 }

Here is the call graph for this function:

std::ostream & G4Polycone::StreamInfo ( std::ostream & os ) const

virtual

Reimplemented from G4VCSGfaceted.

Definition at line 730 of file G4Polycone.cc.

 {
   G4int oldprc = os.precision(16);
   os << "-----------------------------------------------------------\n"
      << "    *** Dump for solid - " << GetName() << " ***\n"
      << "    ===================================================\n"
      << " Solid type: G4Polycone\n"
      << " Parameters: \n"
      << "    starting phi angle : " << startPhi/degree << " degrees \n"
      << "    ending phi angle   : " << endPhi/degree << " degrees \n";
   G4int i=0;
   
     G4int numPlanes = original_parameters->Num_z_planes;
     os << "    number of Z planes: " << numPlanes << "\n"
        << "              Z values: \n";
     for (i=0; i<numPlanes; i++)
     {
       os << "              Z plane " << i << ": "
          << original_parameters->Z_values[i] << "\n";
     }
     os << "              Tangent distances to inner surface (Rmin): \n";
     for (i=0; i<numPlanes; i++)
     {
       os << "              Z plane " << i << ": "
          << original_parameters->Rmin[i] << "\n";
     }
     os << "              Tangent distances to outer surface (Rmax): \n";
     for (i=0; i<numPlanes; i++)
     {
       os << "              Z plane " << i << ": "
          << original_parameters->Rmax[i] << "\n";
     }
   
   os << "    number of RZ points: " << numCorner << "\n"
      << "              RZ values (corners): \n";
      for (i=0; i<numCorner; i++)
      {
        os << "                         "
           << corners[i].r << ", " << corners[i].z << "\n";
      }
   os << "-----------------------------------------------------------\n";
   os.precision(oldprc);
 
   return os;
 }

Here is the call graph for this function:

Member Data Documentation

G4PolyconeSideRZ* G4Polycone::corners

protected

Definition at line 197 of file G4Polycone.hh.

G4EnclosingCylinder* G4Polycone::enclosingCylinder

protected

Definition at line 202 of file G4Polycone.hh.

G4double G4Polycone::endPhi

protected

Definition at line 194 of file G4Polycone.hh.

G4int G4Polycone::numCorner

protected

Definition at line 196 of file G4Polycone.hh.

G4PolyconeHistorical* G4Polycone::original_parameters

protected

Definition at line 198 of file G4Polycone.hh.

G4bool G4Polycone::phiIsOpen

protected

Definition at line 195 of file G4Polycone.hh.

G4double G4Polycone::startPhi

protected

Definition at line 193 of file G4Polycone.hh.

The documentation for this class was generated from the following files:

source/geant4.10.03.p02/source/geometry/solids/specific/include/G4Polycone.hh
source/geant4.10.03.p02/source/geometry/solids/specific/src/G4Polycone.cc

Public Member Functions

Protected Member Functions

Protected Attributes

Detailed Description

Constructor & Destructor Documentation

Member Function Documentation

Member Data Documentation