G4GeometryMessenger Class Reference

#include <G4GeometryMessenger.hh>

Inheritance diagram for G4GeometryMessenger:

Collaboration diagram for G4GeometryMessenger:

Public Member Functions
	G4GeometryMessenger (G4TransportationManager *tman)
	~G4GeometryMessenger ()
void	SetNewValue (G4UIcommand *command, G4String newValues)
G4String	GetCurrentValue (G4UIcommand *command)
Public Member Functions inherited from G4UImessenger
	G4UImessenger ()
	G4UImessenger (const G4String &path, const G4String &dsc, G4bool commandsToBeBroadcasted=true)
virtual	~G4UImessenger ()
G4bool	operator== (const G4UImessenger &messenger) const
G4bool	CommandsShouldBeInMaster () const

Additional Inherited Members
Protected Member Functions inherited from G4UImessenger
G4String	ItoS (G4int i)
G4String	DtoS (G4double a)
G4String	BtoS (G4bool b)
G4int	StoI (G4String s)
G4double	StoD (G4String s)
G4bool	StoB (G4String s)
void	AddUIcommand (G4UIcommand *newCommand)
void	CreateDirectory (const G4String &path, const G4String &dsc, G4bool commandsToBeBroadcasted=true)
template<typename T >
T *	CreateCommand (const G4String &cname, const G4String &dsc)
Protected Attributes inherited from G4UImessenger
G4UIdirectory *	baseDir
G4String	baseDirName
G4bool	commandsShouldBeInMaster

Detailed Description

Definition at line 57 of file G4GeometryMessenger.hh.

Constructor & Destructor Documentation

G4GeometryMessenger::G4GeometryMessenger

(

G4TransportationManager *

tman

)

Definition at line 59 of file G4GeometryMessenger.cc.

  : tol(0.0), recLevel(0), recDepth(-1), tmanager(tman), tvolume(0)
{
  geodir = new G4UIdirectory( "/geometry/" );
  geodir->SetGuidance( "Geometry control commands." );

  //
  // Geometry navigator commands
  //
  navdir = new G4UIdirectory( "/geometry/navigator/" );
  navdir->SetGuidance( "Geometry navigator control setup." );

  resCmd = new G4UIcmdWithoutParameter( "/geometry/navigator/reset", this );
  resCmd->SetGuidance( "Reset navigator and navigation history." );
  resCmd->SetGuidance( "NOTE: must be called only after kernel has been" );
  resCmd->SetGuidance( "      initialized once through the run manager!" );
  resCmd->AvailableForStates(G4State_Idle);

  verbCmd = new G4UIcmdWithAnInteger( "/geometry/navigator/verbose", this );
  verbCmd->SetGuidance( "Set run-time verbosity for the navigator." );
  verbCmd->SetGuidance(" 0 : Silent (default)");
  verbCmd->SetGuidance(" 1 : Display volume positioning and step lengths");
  verbCmd->SetGuidance(" 2 : Display step/safety info on point location");
  verbCmd->SetGuidance(" 3 : Display minimal state at -every- step");
  verbCmd->SetGuidance(" 4 : Maximum verbosity (very detailed!)");
  verbCmd->SetGuidance( "NOTE: this command has effect -only- if Geant4 has" );
  verbCmd->SetGuidance( "      been installed with the G4VERBOSE flag set!" );
  verbCmd->SetParameterName("level",true);
  verbCmd->SetDefaultValue(0);
  verbCmd->SetRange("level >=0 && level <=4");

  chkCmd = new G4UIcmdWithABool( "/geometry/navigator/check_mode", this );
  chkCmd->SetGuidance( "Set navigator in -check_mode- state." );
  chkCmd->SetGuidance( "This will cause extra checks to be applied during" );
  chkCmd->SetGuidance( "navigation. More strict and less tolerant conditions" );
  chkCmd->SetGuidance( "are applied. A run-time performance penalty may be" );
  chkCmd->SetGuidance( "observed when the -check_mode- state is activated." );
  chkCmd->SetGuidance( "NOTE: this command has effect -only- if Geant4 has" );
  chkCmd->SetGuidance( "      been installed with the G4VERBOSE flag set!" );
  chkCmd->SetParameterName("checkFlag",true);
  chkCmd->SetDefaultValue(false);
  chkCmd->AvailableForStates(G4State_Idle);

  pchkCmd = new G4UIcmdWithABool( "/geometry/navigator/push_notify", this );
  pchkCmd->SetGuidance( "Set navigator verbosity push notifications." );
  pchkCmd->SetGuidance( "This allows to disable/re-enable verbosity in" );
  pchkCmd->SetGuidance( "navigation, when tracks may get stuck and require" );
  pchkCmd->SetGuidance( "one artificial push along the direction by the" );
  pchkCmd->SetGuidance( "navigator. Notification is active by default." );
  pchkCmd->SetGuidance( "NOTE: this command has effect -only- if Geant4 has" );
  pchkCmd->SetGuidance( "      been installed with the G4VERBOSE flag set!" );
  pchkCmd->SetParameterName("pushFlag",true);
  pchkCmd->SetDefaultValue(true);
  pchkCmd->AvailableForStates(G4State_Idle);

  //
  // Geometry verification test commands
  //
  testdir = new G4UIdirectory( "/geometry/test/" );
  testdir->SetGuidance( "Geometry verification control setup." );
  testdir->SetGuidance( "Helps in detecting possible overlapping regions." );

  tolCmd = new G4UIcmdWithADoubleAndUnit( "/geometry/test/tolerance",this );
  tolCmd->SetGuidance( "Define tolerance (in mm) by which overlaps reports" );
  tolCmd->SetGuidance( "should be reported. By default, all overlaps are" );
  tolCmd->SetGuidance( "reported, i.e. tolerance is set to: 0*mm." );
  tolCmd->SetParameterName( "Tolerance", true, true );
  tolCmd->SetDefaultValue( 0 );
  tolCmd->SetDefaultUnit( "mm" );
  tolCmd->SetUnitCategory( "Length" );

  verCmd = new G4UIcmdWithABool( "/geometry/test/verbosity", this );
  verCmd->SetGuidance( "Specify if running in verbosity mode or not." );
  verCmd->SetGuidance( "By default verbosity is set to ON (TRUE)." );
  verCmd->SetParameterName("verbosity",true);
  verCmd->SetDefaultValue(true);
  verCmd->AvailableForStates(G4State_Idle);

  rslCmd = new G4UIcmdWithAnInteger( "/geometry/test/resolution", this );
  rslCmd->SetGuidance( "Set the number of points on surface to be generated for" );
  rslCmd->SetGuidance( "checking overlaps." );
  rslCmd->SetParameterName("resolution",true);
  rslCmd->SetDefaultValue(10000);

  rcsCmd = new G4UIcmdWithAnInteger( "/geometry/test/recursion_start", this );
  rcsCmd->SetGuidance( "Set the initial level in the geometry tree for recursion." );
  rcsCmd->SetGuidance( "recursive_test will then start from the specified level." );
  rcsCmd->SetParameterName("initial_level",true);
  rcsCmd->SetDefaultValue(0);

  rcdCmd = new G4UIcmdWithAnInteger( "/geometry/test/recursion_depth", this );
  rcdCmd->SetGuidance( "Set the depth in the geometry tree for recursion." );
  rcdCmd->SetGuidance( "recursive_test will then stop after reached the specified depth." );
  rcdCmd->SetGuidance( "By default, recursion will proceed for the whole depth." );
  rcdCmd->SetParameterName("recursion_depth",true);
  rcdCmd->SetDefaultValue(-1);

  errCmd = new G4UIcmdWithAnInteger( "/geometry/test/maximum_errors", this );
  errCmd->SetGuidance( "Set the maximum number of overlap errors to report" );
  errCmd->SetGuidance( "for each single volume being checked." );
  errCmd->SetGuidance( "Once reached the maximum number specified, overlaps" );
  errCmd->SetGuidance( "affecting that volume further than that are simply ignored." );
  errCmd->SetParameterName("maximum_errors",true);
  errCmd->SetDefaultValue(1);

  recCmd = new G4UIcmdWithoutParameter( "/geometry/test/run", this );
  recCmd->SetGuidance( "Start running the recursive overlap check." );
  recCmd->SetGuidance( "Volumes are recursively asked to verify for overlaps" );
  recCmd->SetGuidance( "for points generated on the surface against their" );
  recCmd->SetGuidance( "respective mother volume and sisters at the same" );
  recCmd->SetGuidance( "level, performing for all daughters and daughters of" );
  recCmd->SetGuidance( "daughters, etc." );
  recCmd->SetGuidance( "NOTE: it may take a very long time," );
  recCmd->SetGuidance( "      depending on the geometry complexity !");
  recCmd->AvailableForStates(G4State_Idle);
}

Here is the call graph for this function:

G4GeometryMessenger::~G4GeometryMessenger

(

)

Definition at line 179 of file G4GeometryMessenger.cc.

{
  delete verCmd; delete recCmd; delete rslCmd;
  delete resCmd; delete rcsCmd; delete rcdCmd; delete errCmd;
  delete tolCmd;
  delete verbCmd; delete pchkCmd; delete chkCmd;
  delete geodir; delete navdir; delete testdir;
  delete tvolume;
}

Member Function Documentation

G4String G4GeometryMessenger::GetCurrentValue ( G4UIcommand *  command )

virtual

Reimplemented from G4UImessenger.

Definition at line 261 of file G4GeometryMessenger.cc.

{
  G4String cv = "";
  if (command == tolCmd) {
    cv = tolCmd->ConvertToString( tol, "mm" );
  }
  return cv;
}

Here is the call graph for this function:

void G4GeometryMessenger::SetNewValue ( G4UIcommand *  command, G4String  newValues  )

virtual

Reimplemented from G4UImessenger.

Definition at line 214 of file G4GeometryMessenger.cc.

{
  if (command == resCmd) {
    ResetNavigator();
  }
  else if (command == verbCmd) {
    SetVerbosity( newValues );
  }
  else if (command == chkCmd) {
    SetCheckMode( newValues );
  }
  else if (command == tolCmd) {
    Init();
    tol = tolCmd->GetNewDoubleValue( newValues )
        * tolCmd->GetNewUnitValue( newValues );
    tvolume->SetTolerance(tol);
  }
  else if (command == verCmd) {
    Init();
    tvolume->SetVerbosity(verCmd->GetNewBoolValue( newValues ));
  }
  else if (command == rslCmd) {
    Init();
    tvolume->SetResolution(rslCmd->GetNewIntValue( newValues ));
  }
  else if (command == rcsCmd) {
    recLevel = rcsCmd->GetNewIntValue( newValues );
  }
  else if (command == rcdCmd) {
    recDepth = rcdCmd->GetNewIntValue( newValues );
  }
  else if (command == errCmd) {
    Init();
    tvolume->SetErrorsThreshold(errCmd->GetNewIntValue( newValues ));
  }
  else if (command == recCmd) {
    Init();
    G4cout << "Running geometry overlaps check..." << G4endl;
    RecursiveOverlapTest();
    G4cout << "Geometry overlaps check completed !" << G4endl;
  }
}

Here is the call graph for this function:

---

The documentation for this class was generated from the following files:

• source/geant4.10.03.p02/source/geometry/navigation/include/G4GeometryMessenger.hh
• source/geant4.10.03.p02/source/geometry/navigation/src/G4GeometryMessenger.cc