d4/de1/_collimator50_beam_line_8cc_source.html

 //

 // ********************************************************************

 // * License and Disclaimer                                           *

 // *                                                                  *

 // * The  Geant4 software  is  copyright of the Copyright Holders  of *

 // * the Geant4 Collaboration.  It is provided  under  the terms  and *

 // * conditions of the Geant4 Software License,  included in the file *

 // * LICENSE and available at  http://cern.ch/geant4/license .  These *

 // * include a list of copyright holders.                             *

 // *                                                                  *

 // * Neither the authors of this software system, nor their employing *

 // * institutes,nor the agencies providing financial support for this *

 // * work  make  any representation or  warranty, express or implied, *

 // * regarding  this  software system or assume any liability for its *

 // * use.  Please see the license in the file  LICENSE  and URL above *

 // * for the full disclaimer and the limitation of liability.         *

 // *                                                                  *

 // * This  code  implementation is the result of  the  scientific and *

 // * technical work of the GEANT4 collaboration.                      *

 // * By using,  copying,  modifying or  distributing the software (or *

 // * any work based  on the software)  you  agree  to acknowledge its *

 // * use  in  resulting  scientific  publications,  and indicate your *

 // * acceptance of all terms of the Geant4 Software license.          *

 // ********************************************************************

 //

 // This is the *BASIC* version of IORT, a Geant4-based application

 //

 // Main Authors: G.Russo(a,b), C.Casarino*(c), G.C. Candiano(c), G.A.P. Cirrone(d), F.Romano(d)

 // Contributor Authors: S.Guatelli(e)

 // Past Authors: G.Arnetta(c), S.E.Mazzaglia(d)

 //

 //   (a) Fondazione Istituto San Raffaele G.Giglio, Cefalù, Italy

 //   (b) IBFM-CNR , Segrate (Milano), Italy

 //   (c) LATO (Laboratorio di Tecnologie Oncologiche), Cefalù, Italy

 //   (d) Laboratori Nazionali del Sud of the INFN, Catania, Italy

 //   (e) University of Wallongong, Australia

 //

 //   *Corresponding author, email to carlo.casarino@polooncologicocefalu.it


 #include "globals.hh"

 #include "G4SystemOfUnits.hh"

 #include "G4Box.hh"

 #include "G4Tubs.hh"

 #include "G4Cons.hh"

 #include "G4VisAttributes.hh"

 #include "G4Colour.hh"

 #include "G4RunManager.hh"

 #include "G4LogicalVolume.hh"

 #include "G4PVPlacement.hh"

 #include "G4RotationMatrix.hh"

 #include "G4NistManager.hh"

 #include "G4NistElementBuilder.hh"

 #include "G4SubtractionSolid.hh"

 #include "IORTDetectorConstruction.hh"

 #include "Collimator50BeamLine.hh"

 #include "Collimator50BeamLineMessenger.hh"


 Collimator50BeamLine::Collimator50BeamLine():

   physicalTreatmentRoom(0),iortDetectorConstruction(0),


   solidFinalCollimatorIORT(0),

   physiFinalCollimatorIORT(0),


   solidGiunz3FinalCollIORT(0),

   physiGiunz3FinalCollIORT(0),


   solidGiunz3FinalCollIntIORT(0),

   physiGiunz3FinalCollIntIORT(0),


   solidGiunz4FinalCollIORT(0),

   physiGiunz4FinalCollIORT(0),


   solidGiunz5FinalCollIORT(0),

   physiGiunz5FinalCollIORT(0),


   solidBlocco1IORT(0),

   physiBlocco1IORT(0),


   solidBlocco2IORT(0),

   physiBlocco2IORT(0),


   solidBlocco3IORT(0),

   physiBlocco3IORT(0),


   solidBlocco20mmIORT(0),

   physiBlocco20mmIORT(0),


   solidCM1_1_2IORT(0),

   physiCM1_1_2IORT(0),


   solidCM1_2_2IORT(0),

   physiCM1_2_2IORT(0),


   solidCM2_1_2IORT(0),

   physiCM2_1_2IORT(0),


   solidCM2_2_2IORT(0),

   physiCM2_2_2IORT(0),


   solidCCMIORT(0),

   physiCCMIORT(0),


   solidPFS1IORT(0),

   physiPFS1IORT(0),


   solidPFS2IORT(0),

   physiPFS2IORT(0),


   solidPFS3IORT(0),

   physiPFS3IORT(0),


   solidFTIORT(0),

   physiFTIORT(0)


 {

   // Messenger to change parameters of the collimator50BeamLine geometry

   collimatorMessenger = new Collimator50BeamLineMessenger(this);


 }

 Collimator50BeamLine::~Collimator50BeamLine()

 {

   delete collimatorMessenger;

   delete iortDetectorConstruction;

 }


 G4VPhysicalVolume* Collimator50BeamLine::Construct()

 {

   // Sets default geometry and materials

   SetDefaultDimensions();


   // Construct the whole Collimator Beam Line

   ConstructCollimator50BeamLine();


   // IORTDetectorConstruction builds ONLY the phantom and the detector with its associated ROGeometry

   iortDetectorConstruction = new IORTDetectorConstruction(physicalTreatmentRoom);


   return physicalTreatmentRoom;

 }


 // In the following method the DEFAULTS used in the geometry of

 // collimator beam line are provided

 // HERE THE USER CAN CHANGE THE GEOMETRY CHARACTERISTICS OF BEAM

 // LINE ELEMENTS, ALTERNATIVELY HE/SHE CAN USE THE MACRO FILE (IF A

 // MESSENGER IS PROVIDED)

 //

 // DEFAULT MATERIAL ARE ALSO PROVIDED

 // and COLOURS ARE ALSO DEFINED

 // ----------------------------------------------------------

 void Collimator50BeamLine::SetDefaultDimensions()

 {


    // Set of coulors that can be used

   white = new G4VisAttributes( G4Colour());

   white -> SetVisibility(true);

   //white -> SetForceSolid(true);


   blue = new G4VisAttributes(G4Colour(0. ,0. ,1.));

   blue -> SetVisibility(true);

   //blue -> SetForceSolid(true);


   gray = new G4VisAttributes( G4Colour(0.5, 0.5, 0.5 ));

   gray-> SetVisibility(true);

   //gray-> SetForceSolid(true);


   red = new G4VisAttributes(G4Colour(1. ,0. ,0.));

   red-> SetVisibility(true);

   //red-> SetForceSolid(true);


   yellow = new G4VisAttributes(G4Colour(1., 1., 0. ));

   yellow-> SetVisibility(true);

   //yellow-> SetForceSolid(true);


   green = new G4VisAttributes( G4Colour(25/255. , 255/255. ,  25/255. ));

   green -> SetVisibility(true);

   //green -> SetForceSolid(true);


   darkGreen = new G4VisAttributes( G4Colour(0/255. , 100/255. ,  0/255. ));

   darkGreen -> SetVisibility(true);

   //darkGreen -> SetForceSolid(true);


   darkOrange3 = new G4VisAttributes( G4Colour(205/255. , 102/255. ,  000/255. ));

   darkOrange3 -> SetVisibility(true);

   //darkOrange3 -> SetForceSolid(true);


   skyBlue = new G4VisAttributes( G4Colour(135/255. , 206/255. ,  235/255. ));

   skyBlue -> SetVisibility(true);

   //skyBlue -> SetForceSolid(true);


   // Geometry FINAL COLLIMATOR DEFAULTS


   G4double defaultOuterRadiusFinalCollimatorIORT = 30. *mm;

   OuterRadiusFinalCollimatorIORT = defaultOuterRadiusFinalCollimatorIORT;


   G4double defaultinnerRadiusFinalCollimatorIORT = 25. *mm;

   innerRadiusFinalCollimatorIORT = defaultinnerRadiusFinalCollimatorIORT;


   // DEFAULT DEFINITION OF THE MATERIALS

   // All elements and compound definition follows the NIST database


   // ELEMENTS

   G4bool isotopes = false;

   G4Material* aluminumNist = G4NistManager::Instance()->FindOrBuildMaterial("G4_Al", isotopes);

   //G4Material* tantalumNist = G4NistManager::Instance()->FindOrBuildMaterial("G4_Ta", isotopes);

   //G4Material* copperNistAsMaterial = G4NistManager::Instance()->FindOrBuildMaterial("G4_Cu", isotopes);

   G4Element* zincNist = G4NistManager::Instance()->FindOrBuildElement("Zn");

   G4Element* copperNist = G4NistManager::Instance()->FindOrBuildElement("Cu");


   // COMPOUND

   G4Material* airNist =  G4NistManager::Instance()->FindOrBuildMaterial("G4_AIR", isotopes);

   //G4Material* kaptonNist = G4NistManager::Instance()->FindOrBuildMaterial("G4_KAPTON", isotopes);

   G4Material* galacticNist = G4NistManager::Instance()->FindOrBuildMaterial("G4_Galactic", isotopes);

   G4Material* PMMANist = G4NistManager::Instance()->FindOrBuildMaterial("G4_PLEXIGLASS", isotopes);

   //G4Material* mylarNist = G4NistManager::Instance()->FindOrBuildMaterial("G4_MYLAR", isotopes);

   G4Material* titanioNist = G4NistManager::Instance()->FindOrBuildMaterial("G4_Ti", isotopes);


   G4double d; // Density

   G4int nComponents;// Number of components

   G4double fractionmass; // Fraction in mass of an element in a material


   d = 8.40*g/cm3;   // brass

   nComponents = 2;

   G4Material* brass = new G4Material("Brass", d, nComponents);

   brass -> AddElement(zincNist, fractionmass = 30 *perCent);

   brass -> AddElement(copperNist, fractionmass = 70 *perCent);


   // MATERIAL ASSIGNMENT


  // Material of the FINAL COLLIMATOR IORT

   finalCollimatorMaterialIORT = PMMANist;


  // Junction 1 FINAL COLLIMATOR IORT

   Giunz1FinalCollMaterialIORT = PMMANist;


  // Junction 2 FINAL COLLIMATOR IORT

   Giunz2FinalCollMaterialIORT = PMMANist;


  // Junction 3 FINAL COLLIMATOR IORT

   Giunz3FinalCollMaterialIORT = PMMANist;


  // Junction 3 FINAL COLLIMATOR Int IORT

   Giunz3FinalCollMaterialIntIORT = airNist;


  // Junction 4 FINAL COLLIMATOR IORT

   Giunz4FinalCollMaterialIORT = PMMANist;


  // Junction 5 FINAL COLLIMATOR IORT

   Giunz5FinalCollMaterialIORT = PMMANist;


  // Block 1 Diameter 30 mm

   Blocco1IORTMaterialIORT = PMMANist;


  // Block 2 Diameter 30 mm

   Blocco2IORTMaterialIORT = PMMANist;


  // Block 3 Diameter 30 mm

   Blocco3IORTMaterialIORT = PMMANist;


  // Block Diameter 20 mm

   Blocco20mmIORTMaterialIORT = PMMANist;


  // First Monitor Chamber Lamina Al 1 of 2

     CM1_1_2IORTMaterialIORT = aluminumNist;


  // First Monitor Chamber Lamina Al 2 of 2

     CM1_2_2IORTMaterialIORT = aluminumNist;


  // Second Monitor Chamber Lamina Al 1 of 2

     CM2_1_2IORTMaterialIORT = aluminumNist;


  // Second Monitor Chamber Lamina Al 2 of 2

     CM2_2_2IORTMaterialIORT = aluminumNist;


  // Monitor Chamber Cylinder

     CCMIORTMaterialIORT = PMMANist;


  // Superior Final Part Monitor Chambers

     PFS1IORTMaterialIORT = PMMANist;


  // Superior Final Part Monitor Chambers

     PFS2IORTMaterialIORT = PMMANist;


  // Superior Final Part Monitor Chambers

     PFS3IORTMaterialIORT = PMMANist;


  // Superior Final Part Monitor Chambers Material

     FTIORTMaterialIORT = titanioNist;


  // Vacuum Source

     VSIORTMaterialIORT = galacticNist;


 }


 void Collimator50BeamLine::ConstructCollimator50BeamLine()

 {

   // -----------------------------

   // Treatment room - World volume

   //------------------------------

   // Treatment room sizes

   const G4double worldX = 400.0 *cm;

   const G4double worldY = 400.0 *cm;

   const G4double worldZ = 400.0 *cm;

   G4bool isotopes = false;


   G4Material* airNist =  G4NistManager::Instance()->FindOrBuildMaterial("G4_AIR", isotopes);

   G4Box* treatmentRoom = new G4Box("TreatmentRoom",worldX,worldY,worldZ);

   G4LogicalVolume* logicTreatmentRoom = new G4LogicalVolume(treatmentRoom,

                                                             airNist,

                                                             "logicTreatmentRoom",

                                                             0,0,0);

   physicalTreatmentRoom = new G4PVPlacement(0,

                                             G4ThreeVector(),

                                             "physicalTreatmentRoom",

                                             logicTreatmentRoom,

                                             0,false,0);


   // The treatment room is invisible in the Visualisation

   logicTreatmentRoom -> SetVisAttributes (G4VisAttributes::Invisible);


   // Components of the Collimator Beam Line


   IortBeamLineVacuumSource();

   IortBeamLineTitaniumWindows();

   IortBeamLineMonitorChambers();

   IortBeamLineBlocks() ;

   IortBeamLineJunctions();

   IortBeamLineFinalCollimator();


 }


 void Collimator50BeamLine::IortBeamLineVacuumSource()

 {

  // ---------------------------------------------------------------//

   //                     Vacuum Source                             //

   // ---------------------------------------------------------------//


   G4double phi1 = 90. *deg;


    G4RotationMatrix rm1;

    rm1.rotateY(phi1);


   const G4double outRadiusVSIORT = 44.75 *mm;

   const G4double innRadiusVSIORT = 0.*mm;

   const G4double hightVSIORT = 1. *mm;

   const G4double startAngleVSIORT = 0.*deg;

   const G4double spanningAngleVSIORT = 360.*deg;

   const G4double XPositionVSIORT = -862.797 *mm;


   solidVSIORT = new G4Tubs("VSIORT", innRadiusVSIORT,

                                     outRadiusVSIORT,

                                     hightVSIORT,

                                     startAngleVSIORT,

                                     spanningAngleVSIORT);


   G4LogicalVolume* logVSIORT = new G4LogicalVolume(solidVSIORT,

                                                               VSIORTMaterialIORT, "VSIORT", 0, 0, 0);


   physiVSIORT = new G4PVPlacement(G4Transform3D(rm1, G4ThreeVector((XPositionVSIORT),0.,0.)),

                                            "VSIORT", logVSIORT, physicalTreatmentRoom, false, 0);


   logVSIORT -> SetVisAttributes(green);


 }


 void Collimator50BeamLine::IortBeamLineTitaniumWindows()

 {

 // ---------------------------------------------------------------//

   //                     Titanium Window                         //

   // ---------------------------------------------------------------//


   G4double phi2 = 90. *deg;


    G4RotationMatrix rm2;

    rm2.rotateY(phi2);


   const G4double outRadiusFTIORT = 44.75 *mm;

   const G4double innRadiusFTIORT = 8.5 *mm;

   const G4double hightFTIORT = 0.006 *mm;

   const G4double startAngleFTIORT = 0.*deg;

   const G4double spanningAngleFTIORT = 360.*deg;

   const G4double XPositionFTIORT = -861.791 *mm;


   solidFTIORT = new G4Tubs("FTIORT", innRadiusFTIORT,

                                     outRadiusFTIORT,

                                     hightFTIORT,

                                     startAngleFTIORT,

                                     spanningAngleFTIORT);


   G4LogicalVolume* logFTIORT = new G4LogicalVolume(solidFTIORT,

                                                               FTIORTMaterialIORT, "FTIORT", 0, 0, 0);


   physiFTIORT = new G4PVPlacement(G4Transform3D(rm2, G4ThreeVector((XPositionFTIORT),0.,0.)),

                                            "FTIORT", logFTIORT, physicalTreatmentRoom, false, 0);


   logFTIORT -> SetVisAttributes(yellow);

 }


 void Collimator50BeamLine::IortBeamLineMonitorChambers()

 {


    G4double phi3 = 90. *deg;


    G4RotationMatrix rm3;

    rm3.rotateY(phi3);


   // Monitor Chambers System


   // ---------------------------------------------------------------//

   //             Superior Final Part Monitor Chambers   3      //

   // ---------------------------------------------------------------//


   const G4double outRadiusPFS3IORT = 44.75 *mm;

   const G4double innRadiusPFS3IORT = 17.5 *mm;

   const G4double hightPFS3IORT = 3.03 *mm;

   const G4double startAnglePFS3IORT = 0.*deg;

   const G4double spanningAnglePFS3IORT = 360.*deg;

   const G4double XPositionPFS3IORT = -848.755 *mm;


   solidPFS3IORT = new G4Tubs("PFS3IORT", innRadiusPFS3IORT,

                                     outRadiusPFS3IORT,

                                     hightPFS3IORT,

                                     startAnglePFS3IORT,

                                     spanningAnglePFS3IORT);


   G4LogicalVolume* logPFS3IORT = new G4LogicalVolume(solidPFS3IORT,

                                                               PFS3IORTMaterialIORT, "PFS3IORT", 0, 0, 0);


   physiPFS3IORT = new G4PVPlacement(G4Transform3D(rm3, G4ThreeVector((XPositionPFS3IORT),0.,0.)),

                                            "PFS3IORT", logPFS3IORT, physicalTreatmentRoom, false, 0);


   logPFS3IORT -> SetVisAttributes(white);


   // ---------------------------------------------------------------//

   //             Superior Final Part Monitor Chambers   2       //

   // ---------------------------------------------------------------//


   const G4double outRadiusPFS2IORT = 44.75 *mm;

   const G4double innRadiusPFS2IORT = 10. *mm;

   const G4double hightPFS2IORT = 1.47 *mm;

   const G4double startAnglePFS2IORT = 0.*deg;

   const G4double spanningAnglePFS2IORT = 360.*deg;

   const G4double XPositionPFS2IORT = -844.255 *mm;


   solidPFS2IORT = new G4Tubs("PFS2IORT", innRadiusPFS2IORT,

                                     outRadiusPFS2IORT,

                                     hightPFS2IORT,

                                     startAnglePFS2IORT,

                                     spanningAnglePFS2IORT);


   G4LogicalVolume* logPFS2IORT = new G4LogicalVolume(solidPFS2IORT,

                                                               PFS2IORTMaterialIORT, "PFS2IORT", 0, 0, 0);


   physiPFS2IORT = new G4PVPlacement(G4Transform3D(rm3, G4ThreeVector((XPositionPFS2IORT),0.,0.)),

                                            "PFS2IORT", logPFS2IORT, physicalTreatmentRoom, false, 0);


   logPFS2IORT -> SetVisAttributes(green);


   // ---------------------------------------------------------------//

   //             Superior Final Part Monitor Chambers   1       //

   // ---------------------------------------------------------------//


   const G4double outRadiusPFS1IORT = 35. *mm;

   const G4double innRadiusPFS1IORT = 10. *mm;

   const G4double hightPFS1IORT = 0.88 *mm;

   const G4double startAnglePFS1IORT = 0.*deg;

   const G4double spanningAnglePFS1IORT = 360.*deg;

   const G4double XPositionPFS1IORT = -841.905 *mm;


   solidPFS1IORT = new G4Tubs("PFS1IORT", innRadiusPFS1IORT,

                                     outRadiusPFS1IORT,

                                     hightPFS1IORT,

                                     startAnglePFS1IORT,

                                     spanningAnglePFS1IORT);


   G4LogicalVolume* logPFS1IORT = new G4LogicalVolume(solidPFS1IORT,

                                                               PFS1IORTMaterialIORT, "PFS1IORT", 0, 0, 0);


   physiPFS1IORT = new G4PVPlacement(G4Transform3D(rm3, G4ThreeVector((XPositionPFS1IORT),0.,0.)),

                                            "PFS1IORT", logPFS1IORT, physicalTreatmentRoom, false, 0);


   logPFS1IORT -> SetVisAttributes(green);


   // ------------------------------------------------//

   //           Monitor Chambers Cylinder               //

   // ------------------------------------------------//


   const G4double outRadiusCCMIORT = 35. *mm;

   const G4double innRadiusCCMIORT = 10. *mm;

   const G4double hightCCMIORT = 4.0125 *mm;

   const G4double startAngleCCMIORT = 0.*deg;

   const G4double spanningAngleCCMIORT = 360.*deg;

   const G4double XPositionCCMIORT = -837.0125 *mm;


   solidCCMIORT = new G4Tubs("CCMIORT", innRadiusCCMIORT,

                                     outRadiusCCMIORT,

                                     hightCCMIORT,

                                     startAngleCCMIORT,

                                     spanningAngleCCMIORT);


   G4LogicalVolume* logCCMIORT = new G4LogicalVolume(solidCCMIORT,

                                                               CCMIORTMaterialIORT, "CCMIORT", 0, 0, 0);


   physiCCMIORT = new G4PVPlacement(G4Transform3D(rm3, G4ThreeVector((XPositionCCMIORT),0.,0.)),

                                            "CCMIORT", logCCMIORT, physicalTreatmentRoom, false, 0);


   logCCMIORT -> SetVisAttributes(green);


   // ------------------------------------------------//

   //        Second Monitor Chamber Lamina Al 2 of 2  //

   // ------------------------------------------------//


   const G4double outRadiusCM2_2_2IORT = 20. *mm;

   const G4double innRadiusCM2_2_2IORT = 0. *mm;

   const G4double hightCM2_2_2IORT = 0.025 *mm;

   const G4double startAngleCM2_2_2IORT = 0.*deg;

   const G4double spanningAngleCM2_2_2IORT = 360.*deg;

   const G4double XPositionCM2_2_2IORT = -841. *mm;


   solidCM2_2_2IORT = new G4Tubs("CM2_2_2IORT", innRadiusCM2_2_2IORT,

                                     outRadiusCM2_2_2IORT,

                                     hightCM2_2_2IORT,

                                     startAngleCM2_2_2IORT,

                                     spanningAngleCM2_2_2IORT);


   G4LogicalVolume* logCM2_2_2IORT = new G4LogicalVolume(solidCM2_2_2IORT,

                                                               CM2_2_2IORTMaterialIORT, "CM2_2_2IORT", 0, 0, 0);


   physiCM2_2_2IORT = new G4PVPlacement(G4Transform3D(rm3, G4ThreeVector((XPositionCM2_2_2IORT),0.,0.)),

                                            "CM2_2_2ORT", logCM2_2_2IORT, physicalTreatmentRoom, false, 0);


   logCM2_2_2IORT -> SetVisAttributes(green);


 // ------------------------------------------------//

   //        Second Monitor Chamber Lamina Al 1 of 2  //

   // ------------------------------------------------//


   const G4double outRadiusCM2_1_2IORT = 20. *mm;

   const G4double innRadiusCM2_1_2IORT = 0. *mm;

   const G4double hightCM2_1_2IORT = 0.025 *mm;

   const G4double startAngleCM2_1_2IORT = 0.*deg;

   const G4double spanningAngleCM2_1_2IORT = 360.*deg;

   const G4double XPositionCM2_1_2IORT = -839. *mm;


   solidCM2_1_2IORT = new G4Tubs("CM2_1_2IORT", innRadiusCM2_1_2IORT,

                                     outRadiusCM2_1_2IORT,

                                     hightCM2_1_2IORT,

                                     startAngleCM2_1_2IORT,

                                     spanningAngleCM2_1_2IORT);


   G4LogicalVolume* logCM2_1_2IORT = new G4LogicalVolume(solidCM2_1_2IORT,

                                                               CM2_1_2IORTMaterialIORT, "CM2_1_2IORT", 0, 0, 0);


   physiCM2_1_2IORT = new G4PVPlacement(G4Transform3D(rm3, G4ThreeVector((XPositionCM2_1_2IORT),0.,0.)),

                                            "CM2_1_2ORT", logCM2_1_2IORT, physicalTreatmentRoom, false, 0);


   logCM2_1_2IORT -> SetVisAttributes(yellow);


   // ------------------------------------------------//

   //        First Monitor Chamber Lamina Al 2 of 2    //

   // ------------------------------------------------//


   const G4double outRadiusCM1_2_2IORT = 20. *mm;

   const G4double innRadiusCM1_2_2IORT = 0. *mm;

   const G4double hightCM1_2_2IORT = 0.025 *mm;

   const G4double startAngleCM1_2_2IORT = 0.*deg;

   const G4double spanningAngleCM1_2_2IORT = 360.*deg;

   const G4double XPositionCM1_2_2IORT = -837. *mm;


   solidCM1_2_2IORT = new G4Tubs("CM1_2_2IORT", innRadiusCM1_2_2IORT,

                                     outRadiusCM1_2_2IORT,

                                     hightCM1_2_2IORT,

                                     startAngleCM1_2_2IORT,

                                     spanningAngleCM1_2_2IORT);


   G4LogicalVolume* logCM1_2_2IORT = new G4LogicalVolume(solidCM1_2_2IORT,

                                                           CM1_2_2IORTMaterialIORT, "CM1_2_2IORT", 0, 0, 0);


   physiCM1_2_2IORT = new G4PVPlacement(G4Transform3D(rm3, G4ThreeVector((XPositionCM1_2_2IORT),0.,0.)),

                                            "CM1_2_2ORT", logCM1_2_2IORT, physicalTreatmentRoom, false, 0);


   logCM1_2_2IORT -> SetVisAttributes(yellow);


   // ------------------------------------------------//

   //        First Monitor Chamber Lamina Al 1 of 2       //

   // ------------------------------------------------//


   const G4double outRadiusCM1_1_2IORT = 20. *mm;

   const G4double innRadiusCM1_1_2IORT = 0. *mm;

   const G4double hightCM1_1_2IORT = 0.025 *mm;

   const G4double startAngleCM1_1_2IORT = 0.*deg;

   const G4double spanningAngleCM1_1_2IORT = 360.*deg;

   const G4double XPositionCM1_1_2IORT = -835. *mm;


   solidCM1_1_2IORT = new G4Tubs("CM1_1_2IORT", innRadiusCM1_1_2IORT,

                                     outRadiusCM1_1_2IORT,

                                     hightCM1_1_2IORT,

                                     startAngleCM1_1_2IORT,

                                     spanningAngleCM1_1_2IORT);


   G4LogicalVolume* logCM1_1_2IORT = new G4LogicalVolume(solidCM1_1_2IORT,

                                                               CM1_1_2IORTMaterialIORT, "CM1_1_2IORT", 0, 0, 0);


   physiCM1_1_2IORT = new G4PVPlacement(G4Transform3D(rm3, G4ThreeVector((XPositionCM1_1_2IORT),0.,0.)),

                                            "CM1_1_2ORT", logCM1_1_2IORT, physicalTreatmentRoom, false, 0);


   logCM1_1_2IORT -> SetVisAttributes(yellow);

 }


 void Collimator50BeamLine::IortBeamLineBlocks()

 {


    G4double phi4 = 90. *deg;


    G4RotationMatrix rm4;

    rm4.rotateY(phi4);


   // IORT BEAM LINE BLOCKS


   // ------------------------------------------------//

   //        Block 4       //

   // ------------------------------------------------//


   const G4double outRadiusBlocco20mmIORT = 36.5 *mm;

   const G4double innRadiusBlocco20mmIORT = 10. *mm;

   const G4double hightBlocco20mmIORT = 3. *mm;

   const G4double startAngleBlocco20mmIORT = 0.*deg;

   const G4double spanningAngleBlocco20mmIORT = 360.*deg;

   const G4double XPositionBlocco20mmIORT = -830. *mm;


   solidBlocco20mmIORT = new G4Tubs("Blocco20mmIORT", innRadiusBlocco20mmIORT,

                                     outRadiusBlocco20mmIORT,

                                     hightBlocco20mmIORT,

                                     startAngleBlocco20mmIORT,

                                     spanningAngleBlocco20mmIORT);


   G4LogicalVolume* logBlocco20mmIORT = new G4LogicalVolume(solidBlocco20mmIORT,

                                                               Blocco20mmIORTMaterialIORT, "Blocco20mmIORT", 0, 0, 0);


   physiBlocco20mmIORT = new G4PVPlacement(G4Transform3D(rm4, G4ThreeVector((XPositionBlocco20mmIORT),0.,0.)),

                                            "Blocco20mmORT", logBlocco20mmIORT, physicalTreatmentRoom, false, 0);


   logBlocco20mmIORT -> SetVisAttributes(green);


   // -----------------------//

   //        Block 3        //

   // -----------------------//


   const G4double outRadiusBlocco3IORT = 36.5 *mm;

   const G4double innRadiusBlocco3IORT = 15. *mm;

   const G4double hightBlocco3IORT = 3.5 *mm;

   const G4double startAngleBlocco3IORT = 0.*deg;

   const G4double spanningAngleBlocco3IORT = 360.*deg;

   const G4double XPositionBlocco3IORT = -823.5 *mm;


   solidBlocco3IORT = new G4Tubs("Blocco3IORT", innRadiusBlocco3IORT,

                                     outRadiusBlocco3IORT,

                                     hightBlocco3IORT,

                                     startAngleBlocco3IORT,

                                     spanningAngleBlocco3IORT);


   G4LogicalVolume* logBlocco3IORT = new G4LogicalVolume(solidBlocco3IORT,

                                                               Blocco3IORTMaterialIORT, "Blocco3IORT", 0, 0, 0);


   physiBlocco3IORT = new G4PVPlacement(G4Transform3D(rm4, G4ThreeVector((XPositionBlocco3IORT),0.,0.)),

                                            "Blocco3ORT", logBlocco3IORT, physicalTreatmentRoom, false, 0);


   logBlocco3IORT -> SetVisAttributes(yellow);


  // -----------------------//

   //        Block 2        //

   // -----------------------//


   const G4double outRadiusBlocco2IORT = 41.5 *mm;

   const G4double innRadiusBlocco2IORT = 15. *mm;

   const G4double hightBlocco2IORT = 8. *mm;

   const G4double startAngleBlocco2IORT = 0.*deg;

   const G4double spanningAngleBlocco2IORT = 360.*deg;

   const G4double XPositionBlocco2IORT = -812. *mm;


   solidBlocco2IORT = new G4Tubs("Blocco2IORT", innRadiusBlocco2IORT,

                                     outRadiusBlocco2IORT,

                                     hightBlocco2IORT,

                                     startAngleBlocco2IORT,

                                     spanningAngleBlocco2IORT);


   G4LogicalVolume* logBlocco2IORT = new G4LogicalVolume(solidBlocco2IORT,

                                                               Blocco2IORTMaterialIORT, "Blocco2IORT", 0, 0, 0);


   physiBlocco2IORT = new G4PVPlacement(G4Transform3D(rm4, G4ThreeVector((XPositionBlocco2IORT),0.,0.)),

                                            "Blocco2IORT", logBlocco2IORT, physicalTreatmentRoom, false, 0);


   logBlocco2IORT -> SetVisAttributes(red);


   // ----------------------- //

   //       Block 1          //

   // ----------------------- //


   const G4double outRadiusBlocco1IORT = 52.0 *mm;

   const G4double innRadiusBlocco1IORT = 15. *mm;

   const G4double hightBlocco1IORT = 8.5 *mm;

   const G4double startAngleBlocco1IORT = 0.*deg;

   const G4double spanningAngleBlocco1IORT = 360.*deg;

   const G4double XPositionBlocco1IORT = -795.5*mm;


   solidBlocco1IORT = new G4Tubs("Blocco1IORT", innRadiusBlocco1IORT,

                                     outRadiusBlocco1IORT,

                                     hightBlocco1IORT,

                                     startAngleBlocco1IORT,

                                     spanningAngleBlocco1IORT);


   G4LogicalVolume* logBlocco1IORT = new G4LogicalVolume(solidBlocco1IORT,

                                                               Blocco1IORTMaterialIORT, "Blocco1IORT", 0, 0, 0);


   physiBlocco1IORT = new G4PVPlacement(G4Transform3D(rm4, G4ThreeVector((XPositionBlocco1IORT),0.,0.)),

                                            "Blocco1IORT", logBlocco1IORT, physicalTreatmentRoom, false, 0);


   logBlocco1IORT -> SetVisAttributes(white);


 }


 void Collimator50BeamLine::IortBeamLineJunctions()

 {


   G4double phi5 = 90. *deg;


    G4RotationMatrix rm5;

    rm5.rotateY(phi5);

 // --------------------------------- //

   // Junction 5 FINAL COLLIMATOR IORT //

   // --------------------------------- //


   const G4double outRadiusGiunz5FinalCollIORT = 48.25 *mm;

   const G4double innRadiusGiunz5FinalCollIORT = 13.75 *mm;

   const G4double hightGiunz5FinalCollIORT = 3.5 *mm;

   const G4double startAngleGiunz5FinalCollIORT = 0.*deg;

   const G4double spanningAngleGiunz5FinalCollIORT = 360.*deg;

   const G4double Giunz5FinalCollXPositionIORT = -783.5 *mm;


   solidGiunz5FinalCollIORT = new G4Tubs("Giunz5FinalCollIORT", innRadiusGiunz5FinalCollIORT,

                                     outRadiusGiunz5FinalCollIORT,

                                     hightGiunz5FinalCollIORT,

                                     startAngleGiunz5FinalCollIORT,

                                     spanningAngleGiunz5FinalCollIORT);


   G4LogicalVolume* logGiunz5FinalCollIORT = new G4LogicalVolume(solidGiunz5FinalCollIORT,

                                                               Giunz5FinalCollMaterialIORT, "Giunz5FinalCollIORT", 0, 0, 0);


   physiGiunz5FinalCollIORT = new G4PVPlacement(G4Transform3D(rm5, G4ThreeVector((Giunz5FinalCollXPositionIORT),0.,0.)),

                                            "Giunz5FinalCollIORT", logGiunz5FinalCollIORT, physicalTreatmentRoom, false, 0);


   logGiunz5FinalCollIORT -> SetVisAttributes(yellow);


 // --------------------------------- //

   // Junction 4 FINAL COLLIMATOR IORT //

   // --------------------------------- //


   const G4double outRadiusGiunz4FinalCollIORT = 42. *mm;

   const G4double innRadiusGiunz4FinalCollIORT = 13.75 *mm;

   const G4double hightGiunz4FinalCollIORT = 8.5 *mm;

   const G4double startAngleGiunz4FinalCollIORT = 0.*deg;

   const G4double spanningAngleGiunz4FinalCollIORT = 360.*deg;

   const G4double Giunz4FinalCollXPositionIORT = -771.5 *mm;


   solidGiunz4FinalCollIORT = new G4Tubs("Giunz4FinalCollIORT", innRadiusGiunz4FinalCollIORT,

                                     outRadiusGiunz4FinalCollIORT,

                                     hightGiunz4FinalCollIORT,

                                     startAngleGiunz4FinalCollIORT,

                                     spanningAngleGiunz4FinalCollIORT);


   G4LogicalVolume* logGiunz4FinalCollIORT = new G4LogicalVolume(solidGiunz4FinalCollIORT,

                                                               Giunz4FinalCollMaterialIORT, "Giunz4FinalCollIORT", 0, 0, 0);


   physiGiunz4FinalCollIORT = new G4PVPlacement(G4Transform3D(rm5, G4ThreeVector((Giunz4FinalCollXPositionIORT),0.,0.)),

                                            "Giunz4FinalCollIORT", logGiunz4FinalCollIORT, physicalTreatmentRoom, false, 0);


   logGiunz4FinalCollIORT -> SetVisAttributes(blue);


  // --------------------------------- //

   // Junction 3 FINAL COLLIMATOR IORT //

   // --------------------------------- //


   const G4double outRadiusGiunz3FinalCollIORT = 42. *mm;

   const G4double innRadiusGiunz3FinalCollIORT = 0. *mm;

   const G4double hightGiunz3FinalCollIORT = 4.25 *mm;

   const G4double startAngleGiunz3FinalCollIORT = 0.*deg;

   const G4double spanningAngleGiunz3FinalCollIORT = 360.*deg;

   const G4double Giunz3FinalCollXPositionIORT = -758.75 *mm;


   solidGiunz3FinalCollIORT = new G4Tubs("Giunz3FinalCollIORT", innRadiusGiunz3FinalCollIORT,

                                     outRadiusGiunz3FinalCollIORT,

                                     hightGiunz3FinalCollIORT,

                                     startAngleGiunz3FinalCollIORT,

                                     spanningAngleGiunz3FinalCollIORT);


   G4LogicalVolume* logicsolidGiunz3FinalCollIORT = new G4LogicalVolume(solidGiunz3FinalCollIORT,

                                                               Giunz3FinalCollMaterialIORT, "Giunz3FinalCollIORT", 0, 0, 0);


   physiGiunz3FinalCollIORT = new G4PVPlacement(G4Transform3D(rm5, G4ThreeVector((Giunz3FinalCollXPositionIORT),0.,0.)),

                                            "Giunz3FinalCollIORT", logicsolidGiunz3FinalCollIORT, physicalTreatmentRoom, false, 0);


  logicsolidGiunz3FinalCollIORT -> SetVisAttributes(yellow);

  //  logicsolidGiunz3FinalCollIORT -> SetVisAttributes (G4VisAttributes::Invisible);


   // --------------------------------- //

   // Junction 3 FINAL COLLIMATOR IORT internal //

   // --------------------------------- //


   solidGiunz3FinalCollIntIORT = new G4Cons("Giunz3FinalCollIntIORT",0.*mm,13.75*mm,0.*mm,20.0*mm,4.25*mm,0.*deg,360.*deg);


   G4LogicalVolume* logicsolidGiunz3FinalCollIntIORT = new G4LogicalVolume(solidGiunz3FinalCollIntIORT,

                                                               Giunz3FinalCollMaterialIntIORT, "Giunz3FinalCollIntIORT", 0, 0, 0);


   physiGiunz3FinalCollIntIORT = new G4PVPlacement(0, G4ThreeVector(0.,0.,0.),"Giunz3FinalCollIntIORT", logicsolidGiunz3FinalCollIntIORT,physiGiunz3FinalCollIORT, false, 0);


   logicsolidGiunz3FinalCollIntIORT -> SetVisAttributes(yellow);

 }


 void Collimator50BeamLine::IortBeamLineFinalCollimator()

 {

 // -----------------------//

   // FINAL COLLIMATOR IORT  //

   //------------------------//


  // const G4double outRadiusFinalCollimatorIORT = 35. *mm;

  // const G4double innRadiusFinalCollimatorIORT = 30. *mm;

   const G4double hightFinalCollimatorIORT = 349.75 *mm;

   const G4double startAngleFinalCollimatorIORT = 0.*deg;

   const G4double spanningAngleFinalCollimatorIORT = 360.*deg;

   const G4double finalCollimatorXPositionIORT = -404.75 *mm;


   G4double phi6 = 90. *deg;


    G4RotationMatrix rm6;

    rm6.rotateY(phi6);


   solidFinalCollimatorIORT = new G4Tubs("FinalCollimatorIORT", innerRadiusFinalCollimatorIORT,

                                     OuterRadiusFinalCollimatorIORT,

                                     hightFinalCollimatorIORT,

                                     startAngleFinalCollimatorIORT,

                                     spanningAngleFinalCollimatorIORT);


   G4LogicalVolume* logFinalCollimatorIORT = new G4LogicalVolume(solidFinalCollimatorIORT,

                                                               finalCollimatorMaterialIORT, "FinalCollimatorIORT", 0, 0, 0);


   physiFinalCollimatorIORT = new G4PVPlacement(G4Transform3D(rm6, G4ThreeVector((finalCollimatorXPositionIORT),0.,0.)),

                                            "FinalCollimatorIORT", logFinalCollimatorIORT, physicalTreatmentRoom, false, 0);


   //  logFinalCollimatorIORT -> SetVisAttributes(G4VisAttributes::Invisible);

   logFinalCollimatorIORT -> SetVisAttributes(gray);

 }


 void Collimator50BeamLine::SetInnerRadiusFinalCollimatorIORT(G4double value)

 {

   solidFinalCollimatorIORT -> SetInnerRadius(value);

   G4RunManager::GetRunManager() -> GeometryHasBeenModified();

   G4cout<<"Inner Radius of the final collimator IORT is (mm):"

         << solidFinalCollimatorIORT -> GetInnerRadius()/mm

         << G4endl;

 }


 void Collimator50BeamLine::SetOuterRadiusFinalCollimatorIORT(G4double value)

 {

   solidFinalCollimatorIORT -> SetOuterRadius(value);

   G4RunManager::GetRunManager() -> GeometryHasBeenModified();

   G4cout<<"Outer Radius of the final collimator IORT is (mm):"

         << solidFinalCollimatorIORT -> GetOuterRadius()/mm

         << G4endl;

 }


Collimator50BeamLine::SetDefaultDimensions
void SetDefaultDimensions()
Definition: Collimator50BeamLine.cc:159

Collimator50BeamLine::Blocco3IORTMaterialIORT
G4Material * Blocco3IORTMaterialIORT
Definition: Collimator50BeamLine.hh:157

cm
static const double cm
Definition: G4SIunits.hh:106

pyG4RunManager::GeometryHasBeenModified
GeometryHasBeenModified
Definition: pyG4RunManager.cc:94

G4NistElementBuilder.hh

Collimator50BeamLine::blue
G4VisAttributes * blue
Definition: Collimator50BeamLine.hh:101

G4NistManager::FindOrBuildMaterial
G4Material * FindOrBuildMaterial(const G4String &name, G4bool isotopes=true, G4bool warning=false)
Definition: G4NistManager.hh:446

Collimator50BeamLine::solidGiunz4FinalCollIORT
G4Tubs * solidGiunz4FinalCollIORT
Definition: Collimator50BeamLine.hh:135

Collimator50BeamLine::darkOrange3
G4VisAttributes * darkOrange3
Definition: Collimator50BeamLine.hh:108

Collimator50BeamLine::physiVSIORT
G4VPhysicalVolume * physiVSIORT
Definition: Collimator50BeamLine.hh:211

Collimator50BeamLine::CCMIORTMaterialIORT
G4Material * CCMIORTMaterialIORT
Definition: Collimator50BeamLine.hh:187

Collimator50BeamLine::VSIORTMaterialIORT
G4Material * VSIORTMaterialIORT
Definition: Collimator50BeamLine.hh:212

G4ThreeVector
CLHEP::Hep3Vector G4ThreeVector
Definition: G4ThreeVector.hh:42

G4RunManager.hh

G4PVPlacement
Definition: G4PVPlacement.hh:51

Collimator50BeamLine::iortDetectorConstruction
IORTDetectorConstruction * iortDetectorConstruction
Definition: Collimator50BeamLine.hh:99

G4RotationMatrix
CLHEP::HepRotation G4RotationMatrix
Definition: G4RotationMatrix.hh:43

Collimator50BeamLine::physicalTreatmentRoom
G4VPhysicalVolume * physicalTreatmentRoom
Definition: Collimator50BeamLine.hh:98

Collimator50BeamLine::solidPFS1IORT
G4Tubs * solidPFS1IORT
Definition: Collimator50BeamLine.hh:190

Collimator50BeamLine::solidCM2_1_2IORT
G4Tubs * solidCM2_1_2IORT
Definition: Collimator50BeamLine.hh:175

Collimator50BeamLine::solidVSIORT
G4Tubs * solidVSIORT
Definition: Collimator50BeamLine.hh:210

G4VPhysicalVolume
Definition: G4VPhysicalVolume.hh:82

Collimator50BeamLine::solidBlocco2IORT
G4Tubs * solidBlocco2IORT
Definition: Collimator50BeamLine.hh:150

G4Box
Definition: G4Box.hh:64

G4NistManager.hh

Collimator50BeamLine::SetInnerRadiusFinalCollimatorIORT
void SetInnerRadiusFinalCollimatorIORT(G4double)
Definition: Collimator50BeamLine.cc:903

Collimator50BeamLine::white
G4VisAttributes * white
Definition: Collimator50BeamLine.hh:103

Collimator50BeamLine::physiFTIORT
G4VPhysicalVolume * physiFTIORT
Definition: Collimator50BeamLine.hh:206

Collimator50BeamLine::IortBeamLineVacuumSource
void IortBeamLineVacuumSource()
Definition: Collimator50BeamLine.cc:348

G4Tubs
Definition: G4Tubs.hh:85

G4Material
Definition: G4Material.hh:120

G4Element
Definition: G4Element.hh:97

G4Colour
Definition: G4Colour.hh:83

G4Box.hh

Collimator50BeamLine::ConstructCollimator50BeamLine
void ConstructCollimator50BeamLine()
Definition: Collimator50BeamLine.cc:309

Collimator50BeamLine::physiGiunz5FinalCollIORT
G4VPhysicalVolume * physiGiunz5FinalCollIORT
Definition: Collimator50BeamLine.hh:141

Collimator50BeamLine::solidBlocco3IORT
G4Tubs * solidBlocco3IORT
Definition: Collimator50BeamLine.hh:155

Collimator50BeamLine.hh

Collimator50BeamLine::CM1_1_2IORTMaterialIORT
G4Material * CM1_1_2IORTMaterialIORT
Definition: Collimator50BeamLine.hh:167

nComponents
G4int nComponents
Definition: TRTMaterials.hh:41

G4int
int G4int
Definition: G4Types.hh:78

G4NistManager::Instance
static G4NistManager * Instance()
Definition: G4NistManager.cc:68

Collimator50BeamLine::physiBlocco20mmIORT
G4VPhysicalVolume * physiBlocco20mmIORT
Definition: Collimator50BeamLine.hh:161

Collimator50BeamLine::~Collimator50BeamLine
~Collimator50BeamLine()
Definition: Collimator50BeamLine.cc:126

Collimator50BeamLine::solidCM2_2_2IORT
G4Tubs * solidCM2_2_2IORT
Definition: Collimator50BeamLine.hh:180

Collimator50BeamLine::solidGiunz3FinalCollIntIORT
G4Cons * solidGiunz3FinalCollIntIORT
Definition: Collimator50BeamLine.hh:130

Collimator50BeamLine::solidPFS2IORT
G4Tubs * solidPFS2IORT
Definition: Collimator50BeamLine.hh:195

Collimator50BeamLineMessenger.hh

Collimator50BeamLine::solidBlocco1IORT
G4Tubs * solidBlocco1IORT
Definition: Collimator50BeamLine.hh:145

Collimator50BeamLine::physiFinalCollimatorIORT
G4VPhysicalVolume * physiFinalCollimatorIORT
Definition: Collimator50BeamLine.hh:115

Collimator50BeamLine::physiBlocco1IORT
G4VPhysicalVolume * physiBlocco1IORT
Definition: Collimator50BeamLine.hh:146

Collimator50BeamLine::Giunz4FinalCollMaterialIORT
G4Material * Giunz4FinalCollMaterialIORT
Definition: Collimator50BeamLine.hh:137

Collimator50BeamLine::collimatorMessenger
Collimator50BeamLineMessenger * collimatorMessenger
Definition: Collimator50BeamLine.hh:97

Collimator50BeamLine::physiPFS1IORT
G4VPhysicalVolume * physiPFS1IORT
Definition: Collimator50BeamLine.hh:191

Collimator50BeamLine::darkGreen
G4VisAttributes * darkGreen
Definition: Collimator50BeamLine.hh:107

G4VisAttributes.hh

rm3
Definition: G4tgrRotationMatrix.hh:47

G4SubtractionSolid.hh

Collimator50BeamLine::solidCM1_2_2IORT
G4Tubs * solidCM1_2_2IORT
Definition: Collimator50BeamLine.hh:170

Collimator50BeamLine::red
G4VisAttributes * red
Definition: Collimator50BeamLine.hh:104

G4cout
G4GLOB_DLL std::ostream G4cout

G4VisAttributes
Definition: G4VisAttributes.hh:65

G4Tubs.hh

deg
static const double deg
Definition: G4SIunits.hh:133

Collimator50BeamLine::solidGiunz3FinalCollIORT
G4Tubs * solidGiunz3FinalCollIORT
Definition: Collimator50BeamLine.hh:125

G4bool
bool G4bool
Definition: G4Types.hh:79

Collimator50BeamLine::CM1_2_2IORTMaterialIORT
G4Material * CM1_2_2IORTMaterialIORT
Definition: Collimator50BeamLine.hh:172

Collimator50BeamLine::physiGiunz3FinalCollIORT
G4VPhysicalVolume * physiGiunz3FinalCollIORT
Definition: Collimator50BeamLine.hh:126

G4Colour.hh

G4Cons
Definition: G4Cons.hh:83

G4LogicalVolume
Definition: G4LogicalVolume.hh:187

cm3
static const double cm3
Definition: G4SIunits.hh:108

Collimator50BeamLine::Giunz3FinalCollMaterialIORT
G4Material * Giunz3FinalCollMaterialIORT
Definition: Collimator50BeamLine.hh:127

Collimator50BeamLine::physiGiunz4FinalCollIORT
G4VPhysicalVolume * physiGiunz4FinalCollIORT
Definition: Collimator50BeamLine.hh:136

G4Transform3D
HepGeom::Transform3D G4Transform3D
Definition: G4Transform3D.hh:35

perCent
static const double perCent
Definition: G4SIunits.hh:296

Collimator50BeamLine::PFS3IORTMaterialIORT
G4Material * PFS3IORTMaterialIORT
Definition: Collimator50BeamLine.hh:202

Collimator50BeamLine::physiCCMIORT
G4VPhysicalVolume * physiCCMIORT
Definition: Collimator50BeamLine.hh:186

IORTDetectorConstruction
Definition: IORTDetectorConstruction.hh:58

globals.hh

Collimator50BeamLine::green
G4VisAttributes * green
Definition: Collimator50BeamLine.hh:106

Collimator50BeamLine::OuterRadiusFinalCollimatorIORT
G4double OuterRadiusFinalCollimatorIORT
Definition: Collimator50BeamLine.hh:113

G4RunManager::GetRunManager
static G4RunManager * GetRunManager()
Definition: G4RunManager.cc:79

Collimator50BeamLine::solidFTIORT
G4Tubs * solidFTIORT
Definition: Collimator50BeamLine.hh:205

G4LogicalVolume.hh

Collimator50BeamLine::physiBlocco2IORT
G4VPhysicalVolume * physiBlocco2IORT
Definition: Collimator50BeamLine.hh:151

Collimator50BeamLine::IortBeamLineTitaniumWindows
void IortBeamLineTitaniumWindows()
Definition: Collimator50BeamLine.cc:384

Collimator50BeamLine::PFS2IORTMaterialIORT
G4Material * PFS2IORTMaterialIORT
Definition: Collimator50BeamLine.hh:197

g
static const double g
Definition: G4SIunits.hh:162

G4RotationMatrix.hh

Collimator50BeamLine::IortBeamLineMonitorChambers
void IortBeamLineMonitorChambers()
Definition: Collimator50BeamLine.cc:419

Collimator50BeamLine::CM2_2_2IORTMaterialIORT
G4Material * CM2_2_2IORTMaterialIORT
Definition: Collimator50BeamLine.hh:182

G4VisAttributes::Invisible
static const G4VisAttributes Invisible
Definition: G4VisAttributes.hh:83

Collimator50BeamLine::IortBeamLineBlocks
void IortBeamLineBlocks()
Definition: Collimator50BeamLine.cc:638

Collimator50BeamLine::finalCollimatorMaterialIORT
G4Material * finalCollimatorMaterialIORT
Definition: Collimator50BeamLine.hh:116

G4Cons.hh

Collimator50BeamLine::Giunz3FinalCollMaterialIntIORT
G4Material * Giunz3FinalCollMaterialIntIORT
Definition: Collimator50BeamLine.hh:131

Collimator50BeamLine::IortBeamLineFinalCollimator
void IortBeamLineFinalCollimator()
Definition: Collimator50BeamLine.cc:862

Collimator50BeamLine::yellow
G4VisAttributes * yellow
Definition: Collimator50BeamLine.hh:105

G4endl
#define G4endl
Definition: G4ios.hh:61

Collimator50BeamLine::physiGiunz3FinalCollIntIORT
G4VPhysicalVolume * physiGiunz3FinalCollIntIORT
Definition: Collimator50BeamLine.hh:132

Collimator50BeamLine::solidFinalCollimatorIORT
G4Tubs * solidFinalCollimatorIORT
Definition: Collimator50BeamLine.hh:114

Collimator50BeamLine::Giunz1FinalCollMaterialIORT
G4Material * Giunz1FinalCollMaterialIORT
Definition: Collimator50BeamLine.hh:119

Collimator50BeamLine::CM2_1_2IORTMaterialIORT
G4Material * CM2_1_2IORTMaterialIORT
Definition: Collimator50BeamLine.hh:177

Collimator50BeamLine::solidBlocco20mmIORT
G4Tubs * solidBlocco20mmIORT
Definition: Collimator50BeamLine.hh:160

Collimator50BeamLine::SetOuterRadiusFinalCollimatorIORT
void SetOuterRadiusFinalCollimatorIORT(G4double)
Definition: Collimator50BeamLine.cc:914

Collimator50BeamLine::Construct
G4VPhysicalVolume * Construct()
Definition: Collimator50BeamLine.cc:135

Collimator50BeamLine::FTIORTMaterialIORT
G4Material * FTIORTMaterialIORT
Definition: Collimator50BeamLine.hh:207

Collimator50BeamLine::solidPFS3IORT
G4Tubs * solidPFS3IORT
Definition: Collimator50BeamLine.hh:200

Collimator50BeamLine::IortBeamLineJunctions
void IortBeamLineJunctions()
Definition: Collimator50BeamLine.cc:757

Collimator50BeamLine::Collimator50BeamLine
Collimator50BeamLine()
Definition: Collimator50BeamLine.cc:60

Collimator50BeamLine::Giunz5FinalCollMaterialIORT
G4Material * Giunz5FinalCollMaterialIORT
Definition: Collimator50BeamLine.hh:142

G4double
double G4double
Definition: G4Types.hh:76

Collimator50BeamLine::physiPFS3IORT
G4VPhysicalVolume * physiPFS3IORT
Definition: Collimator50BeamLine.hh:201

G4SystemOfUnits.hh

Collimator50BeamLine::physiCM2_2_2IORT
G4VPhysicalVolume * physiCM2_2_2IORT
Definition: Collimator50BeamLine.hh:181

Collimator50BeamLine::Giunz2FinalCollMaterialIORT
G4Material * Giunz2FinalCollMaterialIORT
Definition: Collimator50BeamLine.hh:122

Collimator50BeamLine::physiCM1_2_2IORT
G4VPhysicalVolume * physiCM1_2_2IORT
Definition: Collimator50BeamLine.hh:171

G4NistManager::FindOrBuildElement
G4Element * FindOrBuildElement(G4int Z, G4bool isotopes=true)
Definition: G4NistManager.hh:314

G4PVPlacement.hh

AddElement
Air AddElement(elN,.7)

Collimator50BeamLine::gray
G4VisAttributes * gray
Definition: Collimator50BeamLine.hh:102

Collimator50BeamLine::PFS1IORTMaterialIORT
G4Material * PFS1IORTMaterialIORT
Definition: Collimator50BeamLine.hh:192

Collimator50BeamLineMessenger
Definition: Collimator50BeamLineMessenger.hh:52

mm
static const double mm
Definition: G4SIunits.hh:102

Collimator50BeamLine::innerRadiusFinalCollimatorIORT
G4double innerRadiusFinalCollimatorIORT
Definition: Collimator50BeamLine.hh:112

Collimator50BeamLine::Blocco2IORTMaterialIORT
G4Material * Blocco2IORTMaterialIORT
Definition: Collimator50BeamLine.hh:152

Collimator50BeamLine::Blocco1IORTMaterialIORT
G4Material * Blocco1IORTMaterialIORT
Definition: Collimator50BeamLine.hh:147

Collimator50BeamLine::Blocco20mmIORTMaterialIORT
G4Material * Blocco20mmIORTMaterialIORT
Definition: Collimator50BeamLine.hh:162

Collimator50BeamLine::physiPFS2IORT
G4VPhysicalVolume * physiPFS2IORT
Definition: Collimator50BeamLine.hh:196

rm6
Definition: G4tgrRotationMatrix.hh:47

Collimator50BeamLine::solidCCMIORT
G4Tubs * solidCCMIORT
Definition: Collimator50BeamLine.hh:185

IORTDetectorConstruction.hh

Collimator50BeamLine::physiBlocco3IORT
G4VPhysicalVolume * physiBlocco3IORT
Definition: Collimator50BeamLine.hh:156

Collimator50BeamLine::physiCM2_1_2IORT
G4VPhysicalVolume * physiCM2_1_2IORT
Definition: Collimator50BeamLine.hh:176

Collimator50BeamLine::physiCM1_1_2IORT
G4VPhysicalVolume * physiCM1_1_2IORT
Definition: Collimator50BeamLine.hh:166

Collimator50BeamLine::skyBlue
G4VisAttributes * skyBlue
Definition: Collimator50BeamLine.hh:109

Collimator50BeamLine::solidGiunz5FinalCollIORT
G4Tubs * solidGiunz5FinalCollIORT
Definition: Collimator50BeamLine.hh:140

Collimator50BeamLine::solidCM1_1_2IORT
G4Tubs * solidCM1_1_2IORT
Definition: Collimator50BeamLine.hh:165