F02ElectricFieldSetup.cc

Go to the documentation of this file.

//
// ********************************************************************
// * License and Disclaimer                                           *
// *                                                                  *
// * The  Geant4 software  is  copyright of the Copyright Holders  of *
// * the Geant4 Collaboration.  It is provided  under  the terms  and *
// * conditions of the Geant4 Software License,  included in the file *
// * LICENSE and available at  http://cern.ch/geant4/license .  These *
// * include a list of copyright holders.                             *
// *                                                                  *
// * Neither the authors of this software system, nor their employing *
// * institutes,nor the agencies providing financial support for this *
// * work  make  any representation or  warranty, express or implied, *
// * regarding  this  software system or assume any liability for its *
// * use.  Please see the license in the file  LICENSE  and URL above *
// * for the full disclaimer and the limitation of liability.         *
// *                                                                  *
// * This  code  implementation is the result of  the  scientific and *
// * technical work of the GEANT4 collaboration.                      *
// * By using,  copying,  modifying or  distributing the software (or *
// * any work based  on the software)  you  agree  to acknowledge its *
// * use  in  resulting  scientific  publications,  and indicate your *
// * acceptance of all terms of the Geant4 Software license.          *
// ********************************************************************
//
//
//
// $Id: F02ElectricFieldSetup.cc 77123 2013-11-21 16:13:28Z gcosmo $
//
//   User Field class implementation.
//
//
//....oooOO0OOooo........oooOO0OOooo........oooOO0OOooo........oooOO0OOooo......
//....oooOO0OOooo........oooOO0OOooo........oooOO0OOooo........oooOO0OOooo......

#include "F02ElectricFieldSetup.hh"
#include "F02FieldMessenger.hh"

#include "G4UniformElectricField.hh"
#include "G4UniformMagField.hh"
#include "G4MagneticField.hh"
#include "G4FieldManager.hh"
#include "G4TransportationManager.hh"
#include "G4EquationOfMotion.hh"
#include "G4EqMagElectricField.hh"
#include "G4Mag_UsualEqRhs.hh"
#include "G4MagIntegratorStepper.hh"
#include "G4MagIntegratorDriver.hh"
#include "G4ChordFinder.hh"

#include "G4ExplicitEuler.hh"
#include "G4ImplicitEuler.hh"
#include "G4SimpleRunge.hh"
#include "G4SimpleHeum.hh"
#include "G4ClassicalRK4.hh"
#include "G4HelixExplicitEuler.hh"
#include "G4HelixImplicitEuler.hh"
#include "G4HelixSimpleRunge.hh"
#include "G4CashKarpRKF45.hh"
#include "G4RKG3_Stepper.hh"

#include "G4PhysicalConstants.hh"
#include "G4SystemOfUnits.hh"

//....oooOO0OOooo........oooOO0OOooo........oooOO0OOooo........oooOO0OOooo......

//  Constructors:

F02ElectricFieldSetup::F02ElectricFieldSetup()
 : fFieldManager(0),
   fChordFinder(0),
   fEquation(0),
   fEMfield(0),
   fElFieldValue(),
   fStepper(0),
   fIntgrDriver(0),
   fStepperType(4),    // ClassicalRK4 -- the default stepper
   fMinStep(0.010*mm)  // minimal step of 10 microns
{
  fEMfield = new G4UniformElectricField(
                   G4ThreeVector(0.0,100000.0*kilovolt/cm,0.0));
  fEquation = new G4EqMagElectricField(fEMfield);

  fFieldManager = GetGlobalFieldManager();
  fFieldMessenger = new F02FieldMessenger(this);
  UpdateField();
}

//....oooOO0OOooo........oooOO0OOooo........oooOO0OOooo........oooOO0OOooo......

F02ElectricFieldSetup::F02ElectricFieldSetup(G4ThreeVector fieldVector)
  : fFieldManager(0),
    fChordFinder(0),
    fEquation(0),
    fEMfield(0),
    fElFieldValue(),
    fStepper(0),
    fIntgrDriver(0),
    fStepperType(4),    // ClassicalRK4 -- the default stepper
    fMinStep(0.010*mm)  // minimal step of 10 microns
{
  fEMfield = new G4UniformElectricField(fieldVector);
  fEquation = new G4EqMagElectricField(fEMfield);

  fFieldManager = GetGlobalFieldManager();
  fFieldMessenger = new F02FieldMessenger(this);

  UpdateField();
}

//....oooOO0OOooo........oooOO0OOooo........oooOO0OOooo........oooOO0OOooo......

F02ElectricFieldSetup::~F02ElectricFieldSetup()
{
  delete fChordFinder;
  delete fStepper;
  delete fEquation;
  delete fEMfield;
  delete fFieldMessenger;
}

//....oooOO0OOooo........oooOO0OOooo........oooOO0OOooo........oooOO0OOooo......

void F02ElectricFieldSetup::UpdateField()
{
// Register this field to 'global' Field Manager and
// Create Stepper and Chord Finder with predefined type, minstep (resp.)

  SetStepper();

  G4cout<<"The minimal step is equal to "<<fMinStep/mm<<" mm"<<G4endl;

  fFieldManager->SetDetectorField(fEMfield);

  if (fChordFinder) delete fChordFinder;

  fIntgrDriver = new G4MagInt_Driver(fMinStep,
                                     fStepper,
                                     fStepper->GetNumberOfVariables());

  fChordFinder = new G4ChordFinder(fIntgrDriver);

  fFieldManager->SetChordFinder(fChordFinder);
}

//....oooOO0OOooo........oooOO0OOooo........oooOO0OOooo........oooOO0OOooo......

void F02ElectricFieldSetup::SetStepper()
{
// Set stepper according to the stepper type

  G4int nvar = 8;

  if (fStepper) delete fStepper;

  switch ( fStepperType )
  {
    case 0:
      fStepper = new G4ExplicitEuler( fEquation, nvar );
      G4cout<<"G4ExplicitEuler is calledS"<<G4endl;
      break;
    case 1:
      fStepper = new G4ImplicitEuler( fEquation, nvar );
      G4cout<<"G4ImplicitEuler is called"<<G4endl;
      break;
    case 2:
      fStepper = new G4SimpleRunge( fEquation, nvar );
      G4cout<<"G4SimpleRunge is called"<<G4endl;
      break;
    case 3:
      fStepper = new G4SimpleHeum( fEquation, nvar );
      G4cout<<"G4SimpleHeum is called"<<G4endl;
      break;
    case 4:
      fStepper = new G4ClassicalRK4( fEquation, nvar );
      G4cout<<"G4ClassicalRK4 (default) is called"<<G4endl;
      break;
    case 5:
      fStepper = new G4CashKarpRKF45( fEquation, nvar );
      G4cout<<"G4CashKarpRKF45 is called"<<G4endl;
      break;
    case 6:
      fStepper = 0; // new G4RKG3_Stepper( fEquation, nvar );
      G4cout<<"G4RKG3_Stepper is not currently working for Electric Field"
            <<G4endl;
      break;
    case 7:
      fStepper = 0; // new G4HelixExplicitEuler( fEquation );
      G4cout<<"G4HelixExplicitEuler is not valid for Electric Field"<<G4endl;
      break;
    case 8:
      fStepper = 0; // new G4HelixImplicitEuler( fEquation );
      G4cout<<"G4HelixImplicitEuler is not valid for Electric Field"<<G4endl;
      break;
    case 9:
      fStepper = 0; // new G4HelixSimpleRunge( fEquation );
      G4cout<<"G4HelixSimpleRunge is not valid for Electric Field"<<G4endl;
      break;
    default: fStepper = 0;
  }
}

//....oooOO0OOooo........oooOO0OOooo........oooOO0OOooo........oooOO0OOooo......

void F02ElectricFieldSetup::SetFieldValue(G4double fieldValue)
{
  // Set the value of the Global Field to fieldValue along Z

  G4ThreeVector fieldVector( 0.0, 0.0, fieldValue );

  SetFieldValue( fieldVector );
}

//....oooOO0OOooo........oooOO0OOooo........oooOO0OOooo........oooOO0OOooo......

void F02ElectricFieldSetup::SetFieldValue(G4ThreeVector fieldVector)
{
  if (fEMfield) delete fEMfield;

  // Set the value of the Global Field value to fieldVector

  // Find the Field Manager for the global field
  G4FieldManager* fieldMgr= GetGlobalFieldManager();

  if (fieldVector != G4ThreeVector(0.,0.,0.))
  {
    fEMfield = new G4UniformElectricField(fieldVector);
  }
  else
  {
    // If the new field's value is Zero, then it is best to
    //  insure that it is not used for propagation.
    fEMfield = 0;
  }
  fieldMgr->SetDetectorField(fEMfield);
  fEquation->SetFieldObj(fEMfield);  // must now point to the new field
}

//....oooOO0OOooo........oooOO0OOooo........oooOO0OOooo........oooOO0OOooo......

G4FieldManager*  F02ElectricFieldSetup::GetGlobalFieldManager()
{
//  Utility method

  return G4TransportationManager::GetTransportationManager()
           ->GetFieldManager();
}

//....oooOO0OOooo........oooOO0OOooo........oooOO0OOooo........oooOO0OOooo......