Geant4  10.00.p03
GammaKnifeDetectorConstruction.cc
Go to the documentation of this file.
1 //
2 // ********************************************************************
3 // * License and Disclaimer *
4 // * *
5 // * The Geant4 software is copyright of the Copyright Holders of *
6 // * the Geant4 Collaboration. It is provided under the terms and *
7 // * conditions of the Geant4 Software License, included in the file *
8 // * LICENSE and available at http://cern.ch/geant4/license . These *
9 // * include a list of copyright holders. *
10 // * *
11 // * Neither the authors of this software system, nor their employing *
12 // * institutes,nor the agencies providing financial support for this *
13 // * work make any representation or warranty, express or implied, *
14 // * regarding this software system or assume any liability for its *
15 // * use. Please see the license in the file LICENSE and URL above *
16 // * for the full disclaimer and the limitation of liability. *
17 // * *
18 // * This code implementation is the result of the scientific and *
19 // * technical work of the GEANT4 collaboration. *
20 // * By using, copying, modifying or distributing the software (or *
21 // * any work based on the software) you agree to acknowledge its *
22 // * use in resulting scientific publications, and indicate your *
23 // * acceptance of all terms of the Geant4 Software license. *
24 // ********************************************************************
25 //
26 
27 #include "G4SDManager.hh"
28 #include "G4RunManager.hh"
29 #include "G4Box.hh"
30 #include "G4Tubs.hh"
31 #include "G4Cons.hh"
32 #include "G4Orb.hh"
33 #include "G4LogicalVolume.hh"
34 #include "G4ThreeVector.hh"
35 #include "G4PVPlacement.hh"
36 #include "globals.hh"
37 #include "G4RotationMatrix.hh"
38 #include "G4Colour.hh"
39 #include "G4UserLimits.hh"
40 #include "G4VisAttributes.hh"
41 #include "G4NistManager.hh"
42 
45 
46 #include "G4SystemOfUnits.hh"
47 
49  : physicalTreatmentRoom(0),
50  patientPhysicalVolume(0),
51  patientLogicalVolume(0),
52  solidColl_helmet(0),
53  helmetSize(4)
54 {
55  // Messenger to change parameters of the geometry
57 }
58 
60 {
61  delete detectorMessenger;
62 }
63 
65 {
66  // Define the geometry components
68 
69  return physicalTreatmentRoom;
70 }
71 
73 {
74  // NIST Materials
82 
83  // Steel as non-NIST material
87  G4Material* steel = new G4Material("StainlessSteel", 7.80 * g/cm3, 3 /* components */);
88  steel -> AddElement(elFe, 70 * perCent);
89  steel -> AddElement(elCr, 18 * perCent);
90  steel -> AddElement(elNi, 12 * perCent);
91 
92  // -----------------------------
93  // Treatment room - World volume
94  // -----------------------------
95 
96  // Treatment room sizes
97  const G4double worldX = 400.0 *cm;
98  const G4double worldY = 400.0 *cm;
99  const G4double worldZ = 400.0 *cm;
100 
101  G4Box* treatmentRoom = new G4Box("TreatmentRoom",worldX,worldY,worldZ);
102 
103  G4LogicalVolume* logicTreatmentRoom = new G4LogicalVolume(treatmentRoom,
104  air,
105  "logicTreatmentRoom",
106  0,0,0);
107 
109  G4ThreeVector(),
110  "physicalTreatmentRoom",
111  logicTreatmentRoom,
112  0,false,0);
113 
114 
115  // The treatment room is invisible in the Visualisation
116  logicTreatmentRoom -> SetVisAttributes (G4VisAttributes::Invisible);
117 
118 
119  // Visualisation attributes of all elements colours
120  G4VisAttributes * grayFe = new G4VisAttributes(G4Colour(0.5 ,0.5 ,0.5));
121  grayFe -> SetVisibility(true);
122  grayFe -> SetForceSolid(true);
123 
124  G4VisAttributes * blueCobalt = new G4VisAttributes(G4Colour(0. ,0. ,0.7));
125  blueCobalt -> SetVisibility(true);
126  blueCobalt -> SetForceSolid(true);
127 
128  G4VisAttributes * graySS = new G4VisAttributes(G4Colour(0.9 ,0.9 ,0.9));
129  graySS -> SetVisibility(true);
130  graySS -> SetForceSolid(true);
131 
132  G4VisAttributes * grayAl = new G4VisAttributes(G4Colour(0.7 ,0.7 ,0.7));
133  grayAl -> SetVisibility(true);
134  grayAl -> SetForceSolid(true);
135 
136  G4VisAttributes * blackLead = new G4VisAttributes(G4Colour(0.2 ,0.2 ,0.2));
137  blackLead -> SetVisibility(true);
138  blackLead -> SetForceSolid(true);
139 
140 
141  G4VisAttributes * colorTungsten = new G4VisAttributes(G4Colour(0.3 ,0.3 ,0.3));
142  colorTungsten -> SetVisibility(true);
143  colorTungsten -> SetForceSolid(true);
144 
145 
146 
147 
148 
149  //--------------------------------------------
150  // Cylinder source "Tube_source"
151  //--------------------------------------------
152  G4double innerRadiusOfTheTube_source = 0.;
153  G4double outerRadiusOfTheTube_source = 0.5*mm;
154  G4double hightOfTheTube_source = 1*cm;
155  G4double startAngleOfTheTube = 0.*deg;
156  G4double spanningAngleOfTheTube = 360.*deg;
157 
158  G4ThreeVector positionTube_source = G4ThreeVector(0,0,-40.1*cm);
159 
160  solidTube_source = new G4Tubs("solidTube_source",
161  innerRadiusOfTheTube_source,
162  outerRadiusOfTheTube_source,
163  hightOfTheTube_source,
164  startAngleOfTheTube,
165  spanningAngleOfTheTube);
166  logicTube_source = new G4LogicalVolume(solidTube_source,cobalt,"logicTube_source",0,0,0);
168  positionTube_source,
170  "Tube_source",
171  logicTreatmentRoom,
172  false,
173  0);
174 
175  logicTube_source -> SetVisAttributes(blueCobalt);
176 
177 
178  //-------------------------------------
179  // Cylinder covering source "Tube"
180  //-------------------------------------
181  G4double innerRadiusOfTheTube = 0.5*mm;
182  G4double outerRadiusOfTheTube = 4.*mm;
183  G4double hightOfTheTube = 1*cm;
184 
185 
186  G4ThreeVector positionTube = G4ThreeVector(0,0,-40.1*cm);
187 
188  solidTube = new G4Tubs("solidTube",
189  innerRadiusOfTheTube,
190  outerRadiusOfTheTube,
191  hightOfTheTube,
192  startAngleOfTheTube,
193  spanningAngleOfTheTube);
194  logicTube = new G4LogicalVolume(solidTube,steel,"logicTube",0,0,0);
195  physiTube = new G4PVPlacement(0,
196  positionTube,
197  logicTube,
198  "Tube",
199  logicTreatmentRoom,
200  false,
201  0);
202 
203  logicTube -> SetVisAttributes(graySS);
204 
205  //---------------------------------------
206  // Cylinder covering source "Tube_Al"
207  //---------------------------------------
208  G4double innerRadiusOfTheTube_Al = 4.*mm;
209  G4double outerRadiusOfTheTube_Al = 15.*mm;
210  G4double hightOfTheTube_Al = 1*cm;
211 
212  G4ThreeVector positionTube_Al = G4ThreeVector(0,0,-40.1*cm);
213 
214  solidTube_Al = new G4Tubs("solidTube_Al",
215  innerRadiusOfTheTube_Al,
216  outerRadiusOfTheTube_Al,
217  hightOfTheTube_Al,
218  startAngleOfTheTube,
219  spanningAngleOfTheTube);
220  logicTube_Al = new G4LogicalVolume(solidTube_Al,Al,"logicTube_Al",0,0,0);
221  physiTube_Al = new G4PVPlacement(0,
222  positionTube_Al,
223  logicTube_Al,
224  "Tube_Al",
225  logicTreatmentRoom,
226  false,
227  0);
228 
229  logicTube_Al -> SetVisAttributes(grayAl);
230 
231  //----------------------------------------------
232  // Cylinder covering external part of the source "Tube_Fe"
233  //----------------------------------------------
234  G4double innerRadiusOfTheTube_Fe = 15.*mm;
235  G4double outerRadiusOfTheTube_Fe = 50.*mm;
236  G4double hightOfTheTube_Fe = 1*cm;
237 
238 
239  G4ThreeVector positionTube_Fe = G4ThreeVector(0,0,-40.1*cm);
240 
241  solidTube_Fe = new G4Tubs("solidTube_Fe",
242  innerRadiusOfTheTube_Fe,
243  outerRadiusOfTheTube_Fe,
244  hightOfTheTube_Fe,
245  startAngleOfTheTube,
246  spanningAngleOfTheTube);
247  logicTube_Fe = new G4LogicalVolume(solidTube_Fe,Fe,"logicTube_Fe",0,0,0);
248  physiTube_Fe = new G4PVPlacement(0,
249  positionTube_Fe,
250  logicTube_Fe,
251  "Tube_Fe",
252  logicTreatmentRoom,
253  false,
254  0);
255 
256  logicTube_Fe -> SetVisAttributes(grayFe);
257 
258 
259 
260 
261  //------------------------------------------------
262  // Cylinder covering posterior part "Tube_post"
263  //------------------------------------------------
264 
265  G4double innerRadiusOfTheTube_post = 0;
266  G4double outerRadiusOfTheTube_post = 50*mm;
267  G4double hightOfTheTube_post = 1*cm;
268 
269  G4ThreeVector positionTube_post = G4ThreeVector(0,0,-42.2*cm);
270 
271  solidTube_post = new G4Tubs("solidTube_post",
272  innerRadiusOfTheTube_post,
273  outerRadiusOfTheTube_post,
274  hightOfTheTube_post,
275  startAngleOfTheTube,
276  spanningAngleOfTheTube);
277  logicTube_post = new G4LogicalVolume(solidTube_post,Fe,"logicTube_post",0,0,0);
278  physiTube_post = new G4PVPlacement(0,
279  positionTube_post,
281  "Tube_post",
282  logicTreatmentRoom,
283  false,
284  0);
285 
286  logicTube_post -> SetVisAttributes(grayFe);
287 
288 
289  //------------------------------------------------
290  // Fixed cylinder collimator "Tube_coll"
291  //------------------------------------------------
292 
293  G4double innerRadiusOfTheTube_coll = 2.5*mm;
294  G4double outerRadiusOfTheTube_coll = 15.*mm;
295  G4double hightOfTheTube_coll = 3.25*cm;
296 
297  G4ThreeVector positionTube_coll = G4ThreeVector(0,0,-35.2*cm);
298 
299  solidTube_coll = new G4Tubs("solidTube_coll",
300  innerRadiusOfTheTube_coll,
301  outerRadiusOfTheTube_coll,
302  hightOfTheTube_coll,
303  startAngleOfTheTube,
304  spanningAngleOfTheTube);
305  logicTube_coll = new G4LogicalVolume(solidTube_coll,tungsten,"logicTube_coll",0,0,0);
306  physiTube_coll = new G4PVPlacement(0,
307  positionTube_coll,
309  "Tube_coll",
310  logicTreatmentRoom,
311  false,
312  0);
313 
314  logicTube_coll -> SetVisAttributes(colorTungsten);
315 
316 
317  //------------------------------------------------
318  // Cylinder covering fixed collimator "Tube_coll_Fe"
319  //------------------------------------------------
320 
321  G4double innerRadiusOfTheTube_coll_Fe = 15.*mm;
322  G4double outerRadiusOfTheTube_coll_Fe = 50.*mm;
323  G4double hightOfTheTube_coll_Fe = 3.25*cm;
324 
325  G4ThreeVector positionTube_coll_Fe = G4ThreeVector(0,0,-35.2*cm);
326 
327  solidTube_coll_Fe = new G4Tubs("solidTube_coll_Fe",
328  innerRadiusOfTheTube_coll_Fe,
329  outerRadiusOfTheTube_coll_Fe,
330  hightOfTheTube_coll_Fe,
331  startAngleOfTheTube,
332  spanningAngleOfTheTube);
333  logicTube_coll_Fe = new G4LogicalVolume(solidTube_coll_Fe,Fe,"logicTube_coll_Fe",0,0,0);
335  positionTube_coll_Fe,
337  "Tube_coll_Fe",
338  logicTreatmentRoom,
339  false,
340  0);
341 
342  logicTube_coll_Fe -> SetVisAttributes(grayFe);
343 
344 
345  //------------------------------------------------
346  // Fixed truncated cone collimator "Coll_fixed"
347  //------------------------------------------------
348 
349  G4double Rmin1Coll_fixed = 2.5*mm;
350  G4double Rmax1Coll_fixed = 15.*mm;
351  G4double Rmin2Coll_fixed = 4.25*mm;
352  G4double Rmax2Coll_fixed = 15.*mm;
353  G4double hightColl_fixed = 4.625*cm;
354 
355 
356  G4ThreeVector positionColl_fixed = G4ThreeVector(0,0,-27.325*cm);
357 
358  solidColl_fixed = new G4Cons("solidColl_fixed",
359  Rmin1Coll_fixed,
360  Rmax1Coll_fixed,
361  Rmin2Coll_fixed,
362  Rmax2Coll_fixed,
363  hightColl_fixed,
364  startAngleOfTheTube,
365  spanningAngleOfTheTube);
366  logicColl_fixed = new G4LogicalVolume(solidColl_fixed,Pb,"logicColl_fixed",0,0,0);
368  positionColl_fixed,
370  "Coll_fixed",
371  logicTreatmentRoom,
372  false,
373  0);
374 
375  logicColl_fixed -> SetVisAttributes(blackLead);
376 
377 
378  //-----------------------------------------------------------
379  // Cilinder covering fixed collimator "Coll_fixed_Fe"
380  //-----------------------------------------------------------
381 
382  G4double Rmin1Coll_fixed_Fe = 15.*mm;
383  G4double Rmax1Coll_fixed_Fe = 50.*mm;
384  G4double Rmin2Coll_fixed_Fe = 15.*mm;
385  G4double Rmax2Coll_fixed_Fe = 40.*mm;
386  G4double hightColl_fixed_Fe = 4.625*cm;
387 
388 
389  G4ThreeVector positionColl_fixed_Fe = G4ThreeVector(0,0,-27.325*cm);
390 
391  solidColl_fixed_Fe = new G4Cons("solidColl_fixed_Fe",
392  Rmin1Coll_fixed_Fe,
393  Rmax1Coll_fixed_Fe,
394  Rmin2Coll_fixed_Fe,
395  Rmax2Coll_fixed_Fe,
396  hightColl_fixed_Fe,
397  startAngleOfTheTube, //
398  spanningAngleOfTheTube);
399  logicColl_fixed_Fe = new G4LogicalVolume(solidColl_fixed_Fe,Fe,"logicColl_fixed_Fe",0,0,0);
401  positionColl_fixed_Fe,
403  "Coll_fixed_Fe",
404  logicTreatmentRoom,
405  false,
406  0);
407 
408  logicColl_fixed_Fe -> SetVisAttributes(grayFe);
409 
410 
411  //------------------------------------------------
412  // Mobile truncate cone collimator "Coll_helmet"
413  //------------------------------------------------
414  G4double Rmax1Coll_helmet = 15.*mm;
415  G4double Rmax2Coll_helmet = 15.*mm;
416  G4double hightColl_helmet = 3.0*cm;
417 
418 
419  G4ThreeVector positionColl_helmet = G4ThreeVector(0,0,-19.5*cm);
420 
421  solidColl_helmet = new G4Cons("solidColl_helmet",
422  0.0, // will be set later
423  Rmax1Coll_helmet,
424  0.0, // will be set later
425  Rmax2Coll_helmet,
426  hightColl_helmet,
427  startAngleOfTheTube,
428  spanningAngleOfTheTube);
429  UpdateHelmet(); // Set the proper inner radii
430 
431  logicColl_helmet = new G4LogicalVolume(solidColl_helmet,tungsten,"logicColl_helmet",0,0,0);
433  positionColl_helmet,
435  "Coll_helmet",
436  logicTreatmentRoom,
437  false,
438  0);
439 
440  logicColl_helmet -> SetVisAttributes(colorTungsten);
441 
442  //--------------------------------------------------------------
443  // Truncated cone covering mobile collimator "Coll_helmet_Fe"
444  //--------------------------------------------------------------
445 
446  G4double Rmin1Coll_helmet_Fe = 15.*mm;
447  G4double Rmax1Coll_helmet_Fe = 40.*mm;
448  G4double Rmin2Coll_helmet_Fe = 15.*mm;
449  G4double Rmax2Coll_helmet_Fe = 30.*mm;
450  G4double hightColl_helmet_Fe = 3.0*cm;
451 
452  G4ThreeVector positionColl_helmet_Fe = G4ThreeVector(0,0,-19.5*cm);
453 
454  solidColl_helmet_Fe = new G4Cons("solidColl_helmet_Fe",
455  Rmin1Coll_helmet_Fe,
456  Rmax1Coll_helmet_Fe,
457  Rmin2Coll_helmet_Fe,
458  Rmax2Coll_helmet_Fe,
459  hightColl_helmet_Fe,
460  startAngleOfTheTube,
461  spanningAngleOfTheTube);
462  logicColl_helmet_Fe = new G4LogicalVolume(solidColl_helmet_Fe,Fe,"logicColl_helmet_Fe",0,0,0);
464  positionColl_helmet_Fe,
466  "Coll_helmet_Fe",
467  logicTreatmentRoom,
468  false,
469  0);
470 
471  logicColl_helmet_Fe -> SetVisAttributes(grayFe);
472 
473  //-----------------------------------------
474  // Patient --> water spherical phantom
475  //-----------------------------------------
476 
477 
478  G4Orb* patient = new G4Orb("patient",8.*cm);
480  water,
481  "patientLog", 0, 0, 0);
483  G4ThreeVector(0., 0., 0.),
484  "patientPhys",
487  false,0);
488 
489  // Visualisation attributes of the patient
490  G4VisAttributes * redWire = new G4VisAttributes(G4Colour(0.8 ,0. ,0.));
491  redWire -> SetVisibility(true);
492  redWire -> SetForceWireframe(true);
493  redWire -> SetForceAuxEdgeVisible(true);
494  patientLogicalVolume -> SetVisAttributes(redWire);
495 
496 }
497 
499 {
500  if (solidColl_helmet)
501  {
502  switch( helmetSize )
503  {
504  case 18:
507  break;
508 
509  case 14:
512  break;
513 
514  case 8:
517  break;
518 
519  case 4:
522  break;
523  }
524  // Inform the run manager about change in the geometry
526  }
527 }
528 
530 {
531  if (size != helmetSize) // Only if the size changes
532  {
533  // Allow only valid numbers
534  switch( size )
535  {
536  case 18:
537  case 14:
538  case 8:
539  case 4:
540  helmetSize = size;
541  G4cout << "Helmet size set to " << helmetSize << std::endl;
542  UpdateHelmet();
543  break;
544  default:
545  G4Exception("GammaKnifeDetectorConstruction::SetHelmetSize()",
546  "GammaKnife001", FatalException,
547  "Error: Invalid helmet size.");
548  return;
549  }
550  }
551 }
552 
553 
554 
void GeometryHasBeenModified(G4bool prop=true)
static const double cm
Definition: G4SIunits.hh:106
G4Material * FindOrBuildMaterial(const G4String &name, G4bool isotopes=true, G4bool warning=false)
void SetInnerRadiusMinusZ(G4double Rmin1)
CLHEP::Hep3Vector G4ThreeVector
CLHEP::HepRotation G4RotationMatrix
Definition: G4Box.hh:64
Definition: G4Tubs.hh:85
int G4int
Definition: G4Types.hh:78
static G4NistManager * Instance()
G4GLOB_DLL std::ostream G4cout
static const double deg
Definition: G4SIunits.hh:133
Definition: G4Cons.hh:83
static const double cm3
Definition: G4SIunits.hh:108
static const double perCent
Definition: G4SIunits.hh:296
GammaKnifeDetectorMessenger * detectorMessenger
Definition: G4Orb.hh:61
void G4Exception(const char *originOfException, const char *exceptionCode, G4ExceptionSeverity severity, const char *comments)
Definition: G4Exception.cc:41
static G4RunManager * GetRunManager()
Definition: G4RunManager.cc:74
static const double g
Definition: G4SIunits.hh:162
static const G4VisAttributes Invisible
double G4double
Definition: G4Types.hh:76
G4Element * FindOrBuildElement(G4int Z, G4bool isotopes=true)
Air AddElement(elN,.7)
void SetInnerRadiusPlusZ(G4double Rmin2)
static const double mm
Definition: G4SIunits.hh:102
G4Material * Al
Definition: TRTMaterials.hh:74